Midas

Midas

Brand Since 2019-01-17

Midas

165,426 members
175 posts
  • blanc
    Contributor - Level 2
    2020-05-01

    Hello, I can't get my M32R LIVE talkback to work. I plug my sm 58 in talback, I open the monitor window, then talback A. I choose my bus 1, I increase the level of my microphone, I have no visual and audio talkback signal. An idea ?
    Thank you

    read more...
    0 63
    • blanc
      Paul_Vannatto


      @blanc wrote:


      Hello, I can't get my M32R LIVE talkback to work. 





      Is it in latch or momentary mode? Did you press the talkback button?

      • May 1, 2020
  • TMLSound
    Contributor - Level 2
    2020-05-01

    I am setting up a Midas M-32 Live to be installed in a local church. I have 12 mix buses set up for individual monitor outs...I want to be able to solo each mix bus out and hear/monitor each individual mix bus out through the monitor L&R outputs on the back of the mixer through a set of near field monitors connected to these outputs and also have the option to listen with headphones... I have that all set up but the output from the Monitor L&R is coming out in MONO. ???? (The mono button is NOT engaged).. I have a stereo sound track coming in through aux inputs 1&2 . It is stereo coming out the default mix bus outs 15 & 16. But is mono coming out the Monitor outs....strange thing is when I hit solo on the linked stereo tracks coming then the output from the monitor outs goes to stereo....when I clear the solo on the two channels the monitor out goes back to mono....what am I doing wrong...?? thanks for any help...!! p.s. running firmware version 4.02

    read more...
    0 48
    • TMLSound
      KevinMaxwell

      12 monitor mixes to 12 different Monitors or 6 stereo monitors mixes?

      • May 1, 2020
    • TMLSound
      1QSystems

      If I understand what you are doing, you are wanting 12 independent monitor sends.  Unless the busses are paired as 6 stereo mixes, the monitoring will be mono because the buss being selected is mono.  When you solo a stereo input the monitoring will be stereo as you have noted.  I hope this helps.

      • May 20, 2020
  • PatrickGMaillot
    Valued Contributor - Level 2
    2020-05-01

    X32Automate (REAPER and XLive versions) updates

    BIG thanks you to the 6700+ website visitors and the licensed version users: New updates with small fixes for both versions and two new functionalities for the REAPER version. Email notices sent. more info available at: https://x32ram.com

    read more...
    0 34
  • hollywood
    Contributor - Level 3
    2020-04-30

    So, does anyone know when we can expect to see the DL8 stagebox?  

    0 30
  • escafia
    Contributor - Level 2
    2020-04-28

    Hello, I’m pretending to buy a M32 Live . Since I Live in Macau, China I was looking in some sites from china. And in one( Alibaba) some sellers are asking 3 time less the average price. My question for you is : This can Really be real or Is a Copy ? Do you have noticed someone trying or doing copy’s from your products? Or in last case is just a scam? Thanks In Advance AC

    read more...
    0 65
    • escafia
      GaryHiggins

      @escafia 


      It could be legit, world economics are in rough shape, tarriffs are normally in place besides. Stockpiled inventory, many people have money issues or are out of work right now and are not buying. etc etc. I would try to talk with a known legitimate seller first there. Must be a way to determine who sells them routinely and is considered reputable. If there is a way to protect your purchase (credit card fraud protection or similar) and price is verified, why not. I doubt there is a copy out there. Too hard to dupe a complex and sophisticated mixer like that. Maybe they are used.

      • April 27, 2020
  • BillFleming
    Contributor - Level 2
    2020-04-27

    20200425_153809.jpgCH17-32 mapped to A01-A16CH17-32 mapped to A01-A16Ch1-16 mapped to A17-A32Ch1-16 mapped to A17-A32

     

    Good evening, We recently expanded our stage inputs by adding a 2nd DL16 so we now have two DL16s daisychained to the M32. When we were using just one DL16, its stage inputs were identified on the M32 as A17-32, however after adding the new DL16 to the end of the chain the inputs from the first box were shifted up to A1-16 and the new box is now assigned A17-32 (see pics). Is there a way through routing perhaps to have the original box appear as A17-32 and the new box to appear as A1-16? I looked into switching the routing by switching Inputs 1-16 to AES50 A1-16 and Inputs 17-32 to AES50 A17-32 on the Home screen (see pic) but managed to generate some major low frequency feedback (muted the main fader afterwards ), however the Inputs were no longer numbered sequentially as they are in the attached pics, which resulted in all inputs just displaying the letter A instead (which seems right to me). But after hearing the feedback I decided against testing it as I was there by myself so wanted to confirm that I was doing this the right way before locking down the configuration and blowing up our monitors. Thoughts?

    20200425_153809.jpg
    read more...
    0 102
    • BillFleming
      DaveMorrison


      @BillFleming wrote:


      But after hearing the feedback I decided against testing it as I was there by myself so wanted to confirm that I was doing this the right way before locking down the configuration and blowing up our monitors. Thoughts?





      Check the new system at 1/10 of the performance volume?


      The A in the scribble strip refers to the AES50-A bus and the number is the channel number. If you want the original box to be A17-A32, then it needs to be second (after the new DL16). Old DL16 [A] --> [B] new DL16 [A] --> M32. The first DL16 in the chain is 1-16; the second, 17-32; the third 33-48.


      That will put the numbers in the right order, but doesn't explain how they were A17-32 in the first place. Did you replace a different box with the new one?


      If you want us to take a look at the your scene to look for feedback possibilities, you can upload your current scene. Also tell us which DL16 your monitors are connected to and it's switch position.


      Here are (older) instructions for saving/uploading a scene. https://behringerwiki.musictribe.com/index.php?title=Uploading_files_to_the_forum
      Upload by Choose File at the bottom of the window.

      • April 27, 2020
    • BillFleming
      GaryHiggins

      @BillFleming 


      In addition, double check the mode each one is set for. The first one should be in in mode 1 (no led's lit). The second one should be mode 2 (+8 led lit). This would be pertaining to outputs but that could be where the feedback problem was coming from based on where the xlr's outs were then connected. Setting them to the modes above would make by default, out 1-8 assignments come from  #1 and out 9-16 from #2. You can change that in your aes50 output routing if you want.


       


      Inputs if daisy chained as @DaveMorrison said, should be seen at the M32 by whichever DL is physically connected first to it, first would be seen as aes50 a 1-16, second would be aes50a 17-32. You can then of course rout those inputs into whatever input bank desired, so aes50 1-16 could be routed to mixer ch 17-32.

      • April 27, 2020
    • BillFleming
      DaveMorrison

      @BillFleming 


      The letter C is fot the Card (probably USB in your case).


      You can't change the number as it's simply the AES50 channel, but thats really not important. It's just an indicator of what source it comes from (and you can remap them per channels). If you really want A17 to be on channel 1, then make sure that box is second in the chain. On the Routing : Input page, Select AES50-A 17-24 to be bank one and AES50-A 25-32 to be bank two. It's just like you had in you pictures.

      • April 28, 2020
    • BillFleming
      BillFleming

      OK, still a little confused so I'll cut to the chase. Ultimately I want the first box connected to the M32 to be mapped to Inputs A17-A32 and the 2nd box connected to the first box to be mapped to inputs A01-16. You said "You can then of course rout those inputs into whatever input bank desired, so aes50 1-16 could be routed to mixer ch 17-32." which I take to mean that rerouting the way I was going about probably was working, the feedback most likely occurred because I had the mains up too high.


       


      In the meantime I found this pick online which illustrates what I was trying to say originally in that after rerouting the Inputs on the Home menu produces just a letter instead of the Input number - letter C in this pic and in my case the letter A. I take it that I'm going about this the right way, if not let me know if and where I messed up.


       


       


      MidasM32_ScribbleStrip.JPG


       


       


       


      Thanks!

      • April 28, 2020
  • DaleAlexander
    Contributor - Level 2
    2020-04-25

    When controlling the mix busses on the M32 for IEMs, how many mix busses can be controlled at a time?

    0 120
    • DaleAlexander
      GaryHiggins

      @DaleAlexander 


      Hello, control in what way, do you mean how many can be used in any given situation? It depends on how many are being otherwise used for fx. 12 mono or 6 stereo is common when still using 4 fx buses

      • April 25, 2020
    • DaleAlexander
      DaleAlexander

      Gary,


      We have 9 musicians controlling their monitor mixes with their phones and/or pads wirelessly through the Ethernet port of the M32.  When we were just using 8 mix busses everything worked great, but when we added the 9th mix bus control things get a little weird on the 9th buss.


      So is there a limit to the quantity of remote control logins to the console.  I know that A&H does limit the # to 8 maximum.


      Thanks,

      • April 26, 2020
    • DaleAlexander
      GaryHiggins

      @DaleAlexander 


      It wouldn't be the mixer, could be the router to # of devices limit. If you have a dual mode router, some could try use the 5ghz band and some use 2.4?

      • April 26, 2020
    • DaleAlexander
      DaleAlexander

      So there is no limit (other than the # of mix busses) to the remote control on the console?


      Thanks,

      • April 26, 2020
    • DaleAlexander
      GaryHiggins

      @DaleAlexander 


      As far as I know there is not. You could test it to verify. See if with 8 people connected, anyone can access all the busses without issue, I suspect it's the 9th device tipping the scales. 

      • April 26, 2020
  • escafia
    Contributor - Level 2
    2020-04-24

    Hello im looking to buy a M32 with Dl32 .i have one question, so we have 25 mixing buses, can i do something like this:

    mix bux 1 to 16- patched to DL32 1 to 16 outs

    matrix 1 to 6- patched to local 1 to 6 outs

    mono bus- pactched to local 7 out

    L/R bus- patched to local 15 and 16 

    My question is , Can we use the 25 buses at same time, or we just can process and have output for 16?

    Thanks, in Advance!

     

     

    read more...
    0 138
    • escafia
      DaveMorrison

      @escafia 


      You can do exactly what you describe. Remember that FX send 1-4 use busses 13-16. Those won't be available for wedges if you use them for effects.

      • April 24, 2020
    • escafia
      escafia

      Yes, i understand the FX . i just want to undestand the max number of outputs i can Process . So like you say i can do this. But in the offline i can't find way to pacth these ( probably is exactly because that, the offline). i see the place to patch one to one  for the Bus 1 to 16, and the aux out . but no more.

      • April 24, 2020
    • escafia
      KevinMaxwell

      I don't know what your application is for wanting that many outputs but I would suggest that you check out the Wing. All of the outputs can be stereo. So if you are looking to do a bunch of IEMs you don’t have to lose 2 MixBus sends per stereo IEM mix. You will still need to use 2 physical outputs. And you can use the DL32 stage box with it or any of the other stage boxes available.   

      • April 25, 2020
    • escafia
      Paul_Vannatto

      Also to add to Kevin's suggestion (@KevinMaxwell), seriously consider getting some DP48 and allow the musicians mix their own mixes. 


       

      • April 25, 2020
  • JAB
    Contributor - Level 3
    2020-04-24

    Hello

    I'm having trouble connecting daw controll to (Studio One) with my board. I've gone to setup turned on enabled, mackie MCU. When I press the Daw Remote on the board it lights up and the channels assigned, stop, play, rewind, etc. But nothing happen when I press the buttons.
    Any help would be appreciated.

    read more...
    0 39
  • escafia
    Contributor - Level 2
    2020-04-23

    Hello all, i looking to buy a M32 and add a Dl 32 on stage, i never work with the desk , so i was  playing with the virtual app to get familiar. I have one question. The input channels that are patched from the DL32, do i have control of the HA gain in the nob on the surface and all the Phatom in  the ON/OFF bottom? Or do I need thru the setup tab to have access to them?

     

    Thanks in Advance!

    read more...
    0 57
    • escafia
      Paul_Vannatto


      @escafia wrote:


      The input channels that are patched from the DL32, do i have control of the HA gain in the nob on the surface and all the Phatom in  the ON/OFF bottom? Or do I need thru the setup tab to have access to them?





      Once connected and sync'd with the DL32, you will have HA control (gain and phantom) in both the channel strip and the Setup, preamp screen.

      • April 23, 2020
Go to page