Behringer

Behringer

Brand Since 2019-01-17

Behringer

165,429 members
179 posts
  • kesha1
    Contributor - Level 3
    2020-06-07

    I connected Roland PK 5A MIDI output to the Behringer MIDI In, the Motor is connected to a computer with Ableton.

    When I set the Motor MIDI Through settings to Thru or Merge, and the USB Out Mode to Thru or Merge the signal from the Roland goes through the Motor, and is received by the Ableton, but not all the keys all the time are playing, and sometimes a sound keeps playing after I release a key, so, I have to press it again, or engage the Panic button. When the Roland is connected to the Ableton directly, without the Motor it plays perfectly, without any glitches.

    What should I do in order to make the Roland (or any other instrument connected to the Motor's MIDI In) go through normally, without any glitches?

    read more...
    0 33
  • lsattle
    Contributor - Level 1
    2020-06-07

    My understanding is that Behringer usb audio interfaces support balanced line input.  I want to get a unit that will allow me to record from unbalanced line input such as a tape machine or the tape monitor port on an old fashioned home stereo with attached turntable to the phono input port.  Thus th question can I plug an unbalanced line output into the line input on a umc204hd?  I find that specifications on usb audio interfaces lacks details in most instances.

    read more...
    0 31
    • lsattle
      RexBeckett

      @lsattle 


      Hello Lynn, welcome to the community.


       


      Yes you can connect unbalanced sources to the UMC204HD Line inputs. Keep the cables as short as possible to minimize noise pickup.

      • June 7, 2020
  • DanFern
    Contributor - Level 1
    2020-06-07

    Hey, 

    I've managed to get my Poly D Synced to my Daw's (reaper) midi clock. It was fairly easy even with very little documentation from Behringer. One issue I have though is that the Arpeggiator will only play 16th notes. Is that intended or is there some setting I should be able to tweak to set the arpeggiator rate (1/4, 8th, 16th, 8T, 1/4D, etc). Surely it isn't hard set to 16th notes?

     

    Thanks in advance

     

     

    read more...
    0 28
  • NEGU93
    Contributor - Level 2
    2020-06-07

    I bought [U-PHORIA STUDIO](https://www.behringer.com/Categories/Behringer/Computer-Audio/Recording-Packages/U-PHORIA-STUDIO/p/P0DZ3). 

    I installed 2 drivers, [ASIO](http://www.asio4all.org/) and a [Berhinger](http://bit.ly/2ptlNTY-Behringer-64bit) whose link I actually got from a [YouTube tutorial](https://www.youtube.com/watch?v=xWirJwKyFx0).

    I'm using Audacity to record and it does so correctly. I also can hear audio correctly, but I cannot use both at once. If I do record while, for example, playing a youtube video, I get the error:
    ```

    Error opening recording device - Error code -9999 Unanticipated host error.

    ```

    I also tried for example Discord, and the recording does not work there.

    I'm not sure what information should I give you. Some ASIO configuration? Properties of the recording and output drivers?

    I can hear on my computer speakers or headphones I connect to it  directly (not through the UM2) but I would rather use the U-Phoria headphones. It seems logical to me that both should work at the same time.

    Help!

    read more...
    0 47
    • NEGU93
      NEGU93

      Solved it. I uninstalled both drivers and reinstall only ASIO.


      Guess you should never go to unofficial sources... I did it because I found 2 videos that did the same and comments on people that solved their issue with it.

      • June 7, 2020
    • NEGU93
      RexBeckett

      @NEGU93 


      Hello Jose, welcome to the community.


       


      You did the right thing. That old driver was intended for Windows 7. Several people have run into trouble using it on Windows 10. As you have found, the built-in drivers should handle the UM2 and many other stereo interfaces. If you run into any more issues, see if these notes help.

      • June 7, 2020
  • acjay
    Contributor - Level 1
    2020-06-06

    I'm a bit rusty on my recording gear, but I'm struggling to get good output levels from my Xenyx 802, and I'm wondering if something's wrong with my unit.

    One thing that seems a bit weird is that the level indicators don't light up at all. I'm not sure if I've done something wrong there.

    The biggest thing I'm struggling with is getting good sound in my Sennheiser HD280 Pro headphones. I've tried to work with several different sources, with not a huge amount of success. I've generally got knobs set at unity. I'm awaiting a couple more components, so some things aren't optimal.

    When I connect them directly to my Roland Octapad's headphone jack, everything sounds perfect. But when connected to the Phones output of the Xenyx, the output sounds low and lacking bass, even when I crank the Main Mix and Ctrl Room knobs pretty high. I'm struggling to get high levels without clipping. This goes for all sources I've tried monitoring through the headphones. Maybe something's wrong with the headphone amp in the mixer?

    For the 2-track output, which I'm using to connect to my sound system, I'm seeing much better results.

    And on a more minor note, it feels like I'm getting really low levels from the Octapad. I've got the master knob maxed on it, and I still have to give it some gain. I'm using an unbalanced mono connection while I await my balanced stereo cables, but it still seems weird. I used two different cables and no difference. Connecting it to a bass amp from the same output yields much better results, with moderate levels. So I guess you could say this has me questioning the preamps.

    photo_2020-06-07_00-14-58.jpg
    read more...
    0 52
    • acjay
      acjay

      Well, I feel kinda dumb now. The problem was that I had 2-TR TO CTRL ROOM pressed in. I guess this makes it so that CTRL ROOM and PHONES monitor only the 2-TRACK INPUT. The weird part is that I got enough signal bleed to hear anything at all. The level lights are working now, too.


      This post clued me in.


      Things I also learned:


      - the Octapad has a +6db boost feature.


      - the Octapad's outputs are unbalanced, so that wasn't going to be an issue.

      • June 6, 2020
  • Hazerbeam
    Contributor - Level 1
    2020-06-06

    Hello,

    I apologize if this issue has already been dealt with, and if so I would appreciate if someone were to point me in the direction of a relaxant thread. Anyway, I am having pervasive audio crackling and cut outs when I play any audio from my MacBook Air through my UMC404HD audio interface. I am especially concerned with how this relates to recording in Logic Pro X.

    The crackling is not a very big issue because it doesn't actually affect how the audio is recorded into the DAW (I have tested this by listening to the recordings directly from computer to headphones: no crackles); on the other hand, the cut outs during recording render long takesnear impossible to capture, because the recording will cut out and what I'm left with afterward is a jump in the audio recorded.

    Should I return my interface and replace it with another brand? Any advice would be appreciated.

    read more...
    0 48
    • Hazerbeam
      RexBeckett

      @Hazerbeam 


      Hello Aidan, welcome to the community.


       


      Are you using the UMC404HD's external power supply? Without it, cut-outs can happen if the PC USB port cannot supply sufficient current.

      • June 6, 2020
  • GeorgeDougherty
    Contributor - Level 2
    2020-06-06

    Really odd that I'm testing now and having difficulty recreating the exact scenario which causes problems..  I've had regular issues recalling a channel snapshot while on User layer 1 of the left hand bank.  The channels snapshot is full channel settings but the scribble strip does not update with a speaker's name when recalling their preset. 

    Toggling the bank to another layer and back to User 1 updates the scribble strip.  Now that I'm focused on testing and paying attention to the channel name on the display I can't duplicate the issue. I have already swapped between banks and recalled a snapshot from the 1-12 layer but can't shut it down in the middle of recording at the moment.  It appears to be state related. 

    read more...
    0 96
  • DickStraathof
    Contributor - Level 3
    2020-06-06

    I have serious problems with my Wing Graphical User Interface. It is randomly swithcing things, depending on what page I am working on. The middle left area is living its own life, I have heard that the first batch of consoles had issues with the capacitive display and I think I am so unlucky to have collected one of these.
    Since the corona issues and UK being almost complete in lock-down, I don't dare to send my console in for service. It can take months before I will receive it back after service and I cannot wait that long time since I have sold my good old X32.
    I have send in a parts request for a new display and that request is "in progress" now. I am curious to see if Behringer will send me a new display so I can replace it myself.
    I think for this time that is the best solution....

    Are other people having the same issues?

    DickS 

    read more...
    0 76
    • DickStraathof
      rickschwar

      Hi Dick,


      I have not had many problems with things changing -- other than channels becoming unassigned from DCAs. Strangely enough, after I reassign them a second or third time, they seem to 'stick.' I know this makes no sense at all, but I've had it happen many times. 


       


      I had to wait almost a month to send in my defective WING-LIVE card because the Vegas repair depot was shut down due to Coronavirus and not accepting any returns. Finally, I got my RMA and then UPS lost my package. The depot has ordered me a replacement, but they are on backorder. 


       


      Good luck with your problem. Hopefully you can get a replacement screen. 

      • June 6, 2020
    • DickStraathof
      GeorgeDougherty

      Yes.  Thankfully it's rare that it selects a spot on the screen for me and most of the time it's just a minor annoyance.  It has happened on an input selection screen where it is problematic during a fast setup.. 

      • June 6, 2020
  • BobaFett
    Contributor - Level 1
    2020-06-05

    Hi Hr. Behringer (Analog Papa):

    I want to say a big "Vielen Dank" from all of us who use analog synthesizers and can't afford to repair our old ones or buy used ones. You are single-handedly creating a 'new new wave" of creativity.

    As most of us use these in our DAW's, we are grateful for this: https://www.youtube.com/watch?v=k14zybabbfU

    but can you ask your firmware engineer to please add MIDI CC for the knobs on the Model D, VC340, Odyssey, TD3, etc so that we can use it in our DAW (Logic PX 10.5 or Abelton) or if we want to play them LIVE we don't have to have octopus hands?

    Until then, that means we have to perform a Sysex Dump each session or have to manually turn them while recording audio instead?! It really limits the creativity and ease of use of your beautiful machines.

    Please consider it (hands held together in prayer). Please. All of us here will hug you!

    Thank you Analog Papa!

    Big hugs from Wien

    Boba

    facethemusicrecords.com

    read more...
    0 38
  • grzzlfizzl
    Newcomer - Level 2
    2020-06-05

    hey,

     

    can i set different midi channels per instrument, like Bass send on Midi CH#1, Snare send Midi Ch#2 etc?

     

    or can the RD-8 send only on one channel?

    0 25
Go to page