Statistics

165,426 members
175 posts
  • sigma
    Triber
    2020-09-02

    tesst tet

    0 20
  • sigma
    Triber
    2020-09-02

    test test

    0 14
  • sigma
    Triber
    2020-09-01

    test

    0 39
  • sigma
    Triber
    2020-09-01

    test

    0 14
  • sigma
    Triber
    2020-08-10

    Test 1

    0 24
  • djmboya
    Newcomer - Level 1
    2020-06-17
    Somebody get solution ?
    0 36
  • WorriedBarry
    Contributor - Level 1
    2020-06-10

    Hi folks, 

    I've recently picked up an original edition Flashback x4 second hand on the 'Bay. My current delay is a good old Boss DD-3, and I was wondering if the Flashback can get close to the glitchy short delay sounds (Radiohead/Klinghoffer) that the Boss is famous for?

    I know that the hold function is unique to the Boss DD series, but I reckon that I'd get a similar result from tap dancing with the looper. 

    Apologies if this has been asked before. Pedal hasn't arrived yet so I haven't had a chance to experiment. 

     

     

    read more...
    0 17
  • Guitar111
    Contributor - Level 1
    2020-06-10

    For the flashback delay 2 is the modulation setting the same 2290 mod that is on the flashback delay 2x4?  Does the 2290 delay on the x4 sound the same as the 2290 on The 2x4 flashback delay but with other options?

    0 36
    • Guitar111
      TC-Mike

      The 2290 delay sounds thre same on all Flashback models.


      The Flashback 2 version have the added feature of the MASH switch, whcih is mapped to freeze and repeat the delay buffer indefinite and input to delay FX  is closed, so you can solo dry over the delay drone as long as MASH switch is pressed down.


       

      • June 10, 2020
  • Philwwe
    Contributor - Level 1
    2020-06-10

    Hi,

    Just picked up the Spectradrive and super useful having a PSU included.  What's the power output of the included PSU?  I currently use a BOSS PSA PSU which outputs 500ma so will the PSU included with the Spectradrive have a similar output and be able to drive up to 4 pedals if needed?

    read more...
    0 24
  • TC-Mike
    Triber Moderator
    2020-06-09

    hi, 

    i moved your post into the correct forum...

    If you want to start out simple without using the aToneprint app, just  use the "DETUNE" type and set the amount of detuning for each Pitch shifter voice via VOICE 1 + 2 interval potmeters -> in DETUNE mode they shift the pitch with up to 50 cents instead of semitones and combined with the 2 direction toggle switches, you can very easily dial in the setting you mentioned above.If you just wnat one detuned voice with 7 cents up, set VOICE 2 to OFF.

    If you want to customize your own Detuning toneprints via the app Try the DUALDETUNE template from the  as a starting point, if you want dynamic detuning via the pressure sensitive MASH switch.. You can customize the detuning amount either fixed for each voice, or change it dynamically via MASH switch. On the MASH mapping page you can set up the parameter curve for the detuning.

    P.s.. you can have a fixed custom detune amount per voice and on top have different detuning via MASH switch, where the value of the detuning will return to the current pitch value of the potmeters of a toneprint when the MASH switch is released.

    Cheers,

    Mike

     

    read more...
    0 41
Go to page