Statistics

165,428 members
177 posts
  • RayMontreal
    Contributor - Level 2
    2019-11-11

    Hi everyone,

    I hope this video helps to explain my problem, struggling to find the right words in english

     

    https://vimeo.com/372529561 

     

    got a MIdas MR18, I'm trying to use it in Ableton via TouchOSC, to control faders and mute buttons

    Now I'm on a Mac and I tried Osculator, I got everything to work except, for the life of me, I can't get any of my movements from ableton or the mixer to reflect on the TouchOSC.

    Ableton talks fine to the mixer, I just can’t figure out how to send it out to the iPad’s TouchOSC. ,

    My knowledge is limited on OSC and I can’t figure it out (I’m pretty good with technology in general).

    I made a map to kinda show my problem:  

     

    Screen Shot 2019-11-11 at 3.48.22 PM.pngScreen Shot 2019-11-11 at 7.04.25 PM.pngScreen Shot 2019-11-11 at 7.04.34 PM.png

    I need help. LOL

     

    Sorry for the poor English as I am French speaking in Montreal Canada,

     

    Thank you for taking the time to read this very long message!

    read more...
    0 190
    • RayMontreal
      KenMitchell

      Hi @RayMontreal , 


       


      Looks like a fun project.  I love the graphic with the orange arrow and the matching orange text explaining the problem.  Well done.   However, I suspect the problem is actually above it with the connection between the mixer and Osculator.   In order to get feedback back from the MR18, Osculator has to listen for those messages as well as periodically re-subscribe to updates.   A couple of years ago a developed a utility called XAirRemote to serve as a bridge between OSC clients (TouchOSC, Lemur, etc) and the XAir/MAir mixers.  I hadn't thought about it but Osculator should be able to be used as a client as well.  


       


      Here's a link to the utility: https://sites.google.com/site/xairutilities/XAirRemote-1_2-OSX.zip?attredirects=0&d=1


       


      In your setup, you'll want to set it up between Osculator and the MR18. 


       


      Let me know what questions you have about the setup. 


       


      Ken

      • November 11, 2019
    • RayMontreal
      RayMontreal

      Well, first of all a very big thank you for replying to my message!


      The MR18 is currently being kept alive with an OSC Message (/xremote) tied to the Beat, so as long as Ableton is playing, the MR18 is alive and also in Ableton, if I move a fader, it does reflect it on the MR-18,


      so that part works! it's just not also being sent to the iPad...


      I want to duplicate the backmapping in Osculator so that it sends it also to the iPad, I just don't know how to get Osculator "talking" to MR-18 AND iPad at the same time. that Ð (and L and 1-16 in Osculator) is super confusing to me and I don't know how to deal with it.


      Having Osculator in there is already a big move for me as I prefer having a very bare minimum of apps open during shows...


      will definitely try your app, thank you!


      but if it's job is to keep MR18 awake, I am already doing that in Osculator and that is working.


      Best,


       


      Ray


       

      • November 11, 2019
    • RayMontreal
      RayMontreal

      my ini file looks like this:


      1 0 0 1 0
      1 16 17 17 18 21 40 45 46 49 51 54 0
      <92.168.0.123>
      <192.168.0.105>
      <192.168.0.182>
      <8000>
      <8000>
      #EOF


      but the MR18 listens to 10024 not 10023 like the XR18, so I think it might be the reason I'm getting a tail like;


       


      OSC Controller at IP <192.168.0.105>, receives on port <8000>, sends to port <8000>


        Listening for OSC Controller on <192.168.0.182>:<8000>


        Flags: verbose: 1, delay: 0ms, Transport: 0, Master: 1, Sync: 0


        Map (min/max): Ch 1/16, Aux 17/17, FxR 18/21, Bus 40/45, FxS 46/49, DCA 51/54, Bus Offset 0


       


      *******************************************************************************************


        Start of Log data:


       


      ->X,    8 B: /info~~~


      XAirConnect: Error sending data to XAir


       


       


       

      • November 11, 2019
    • RayMontreal
      KenMitchell

      Hi Ray, 


       


      The XR18 also uses 10024. 10023 is what the X32 uses. 


       


      Remove the "<" and ">" from the IP addresses and ports in your ini file.  


       


      You've also got <92.168.0.123> which I suspect should be 192.168.0.123.


       


      Ken

      • November 11, 2019
    • RayMontreal
      RayMontreal

      correctly writing my ini file made your app work,


      your app now logs correctly but I dont know what that brings to the table,


      in the tail I see both ipad and mr18 messages show up in the log


      but when I start osculator, it says port 8000 already being used error.


       


      I will NOT give up, my brain is struggling, but there has got to be a way to make all this work! haha

      • November 11, 2019
  • KlausEff
    Contributor - Level 3
    2019-11-10

    RN_312.JPGX32 Download.JPG

    V. 4.0 is similar to V. 3.12 ? And...newest versions only found in the "legacy view". Really funny!

    Hi Paul, I am lucky not having software or firmware problems with my X32 Rack.

    What I found out was, if the new X EDIT32 V.4.0 software release comes, user I/O routing is available!

     

    https://www.youtube.com/watch?v=b4pvYc3zmUE

     

    @Paul_Vannatto 

     

    read more...
    0 264
    • KlausEff
      RexBeckett

      @KlausEff 


      V. 4.0 is similar to V. 3.12 ?


      V 4.0 has new routing capabilities but it can still be used in the same way as V 3.12.


       


      And...newest versions only found in the "legacy view". Really funny!


      As @Paul_Vannatto mentioned in another thread, this is not the first time they have downgraded the current version before releasing the new one.

      • November 9, 2019
    • KlausEff
      PerHeldal

      Just now there is nothing. No current firmware and no legacy. The same for X/M-edit. How hard is it to manage a small archive of downloads? Why not simply keep all the old stuff in place unchanged until there is a new version? And keep all lecacy firmware/software available for download. 


      ...maybe I putting too much confidence in the clowns who still after a year do not even understand how terrible this community-site is compared to what they had before 

      • November 11, 2019
  • Virtue67-
    Regular Contributor - Level 1
    2019-11-06

    I have seen some video clip of the new X32 V4 it looks very nice,

    https://www.youtube.com/watch?v=wv5f1aO_b1A

    Behringer-X32-Firmware-4-Copyright-Detlef-Hoepfner-DSC_3704.jpgBehringer-X32-Firmware-4-Copyright-Detlef-Hoepfner-DSC_3713.jpgBehringer-X32-Firmware-4-Copyright-Detlef-Hoepfner-DSC_3722.jpgBehringer-X32-Firmware-4-Copyright-Detlef-Hoepfner-DSC_3726.jpg

    read more...
    1 361
    • Virtue67-
      GaryHiggins

      The user defined bank could be a game changer for routing. Sounds very intersting indeed! Will open up doors for just about everything if it's an additional staging option for aes50, kind of sounds like it could be that. Having 3 staging options (out 1-16, ultranet out and aux out) that are essentially tied to some sort of output port when used (as powerful even as that is) always left you with the potential problem of those ports being off limits, or partly off limits, because of other use in your routing-eg using p16 routing for card out when you also were using IQ speakers or P16M's. If this is in effect almost a 4th virtual staging menu that also can also mix and match single ch types rather than groups of 8, well that's just plain crazy talk!

      • November 6, 2019
    • Virtue67-
      -mjk- Sure would have been nice to have new FX (such as TC Electronics stuff), dynamics on the FX returns, and and additional insert in each channel/bus. Oh well. At least the dark mode matches my new mobile phone.
      • November 7, 2019
  • GaryHiggins
    Superhero - Level 1
    2019-11-02

    Found this kind of by accident and meant to post it as I had not seen the "official" chart version before and it shows the 2 new modes associated with the latest S/DL16 firmwareNew S16 firmware modes.png

    read more...
    2 122
  • CLVictor
    Contributor - Level 1
    2019-11-01

    Hello !

    I'm learning the mixing and got an issue i'm trying to solve.

    On my M32, everything was fine and suddently, when i press "Solo" on a fader, it goes into my headphones AND my L/R monitoring...

    Everytime i press SOLO on a fader, it goes like the monitoring was a "second" headset.

    I passed 2 days on it, tried all the settings i could find and finaly reseted the M32 (factory reset) but it didn't solve anything (so not a settings issue ?).
    I can guarantee that the cabling is good.

    I obvisouly can't mix without using the Solo in my headset ONLY.

    I asked to teacher in charge but he failed to solve this case, can you help me ?

    read more...
    0 104
    • CLVictor
      Paul_Vannatto

      Hi Victor @CLVictor 


      Welcome to the forum. Are your monitors connected to the monitor outputs on the back of the M32? If so that explains why. The monitor outputs are tied to the headphone outputs. If you want the monitor outputs to be separate, you will need to use a couple of the outputs that are under the XLR inputs, then assign the routing appropriately (Routing, XLR Out).


       

      • October 31, 2019
  • ecarballo
    Contributor - Level 1
    2019-10-28

    Hola buenas tardes quisiera que me ayudaran a recomendar una pagina web donde pueda encontrar un repuesto para MIDAS M32 el numero de parte es P0B31 o con quien me podria contactar para la compra

    -------------------------------------------------------------

    Hello, good afternoon, I would like you to help me recommend a website where I can find a spare part for MIDAS M32, the part number is P0B31 or with whom you could contact me for the purchaseREPUESTO MIDAS M32.jpegWhatsApp Image 2019-10-16 at 10.57.41 AM(1).jpegWhatsApp Image 2019-10-16 at 10.57.41 AM(2).jpegWhatsApp Image 2019-10-16 at 10.57.41 AM.jpeg

    REPUESTO MIDAS M32.jpeg
    read more...
    0 173
  • ChisomWorgu
    Contributor - Level 3
    2019-10-25

    I use one x32 only. for FOH and Recording multitrack to cubase5 simultanously. When the show is on, I set my gains to very good levels below -12db. However on my cubase the signals still come in hot over the top. sometimes on my gain the signal is as low as -40 yet I still got hot unuseable signals in my cubase. I want to know if there is a way to use HA gain spliting to get better signals to my DAW. ie, if there is a way to patch my signals through the mixer to use the trim after the FOH gains to lower the signals going into my DAW or the other way round. thanks.

    However, I thought if Assuming that the signal that comes from “Direct channel Out” in the routing page is before the preamp if you choose the “Input LC” tap point option in the routing page, Channels 1-16 will get direct physical mic or instrument plug into them, while channels 17-32 will get routed signal from the “Direct out channels” from the 16 physical utput buses wired back to the physical input of 17-32 using xlr link cables.

    This is to allow for preamp signals going into my DAW to have independent gain control from the preamps of the 1-16 which will be for the FOH and thus allow for proper recording levels setting. So only channels 17-32 will be selected for recording into the DAW through the xuf card.

    ie. when you use channel splitting in config TAB and double a channel the second channel preamp is still being controlled by the preamp of the physical input plugged in as such you can’t adjust the preamp of the split channel for better record levels independently and also the Trim has no effect in in the recording alsoGain Split issue.jpg

    Gain Split issue.jpg
    read more...
    0 46
  • dinos
    Contributor - Level 1
    2019-10-23

    Hello all,

    I am new here so please forgive me if this is mention before.....

    I am trying to find in the X32 Edit software were is the delay for the output buses.... I would like to use the X32 as direct DSP for our church! It's n old Luthiran church with a lot of reverberation, so I want to create speaker zones and delay them in order to have better sound as it is now... with the 16 buses this would be enough if there is delay funktion....

    thanks in advance for your input!!!!

    read more...
    0 71
    • dinos
      RexBeckett

      @dinos 


      Hi Dinos, welcome to the community.


       


      You can set delays for the sixteen outputs on the Routing -> Output Delay tab. 


      X32 Delays.PNG

      • October 22, 2019
  • PatrickGMaillot
    Valued Contributor - Level 2
    2019-10-17
    Update!!!! Check out how the LR Scribble is used for displaying additional information (transport, tally) from REAPER!! https://x32ram.com/youtube-videos/, and watch the quick video "X32ReaperAutoMate Transport LED Color, and Timecode Display" Recording Studio Phoenixmediaforge.com recorded -Patrick-Gilles Maillot
    read more...
    0 101
  • PatrickGMaillot
    Valued Contributor - Level 2
    2019-10-17
    Update!!!! Check out how the LR Scribble is used for displaying additional information (transport, tally) from REAPER!! https://x32ram.com/youtube-videos/, and watch the quick video "X32ReaperAutoMate Transport LED Color, and Timecode Display" Recording Studio Phoenixmediaforge.com recorded -Patrick-Gilles Maillot
    read more...
    0 118
Go to page