Statistics

165,422 members
164 posts
  • DB-4433
    Contributor - Level 2
    2020-01-22

    I'm just kinda curious ... I put up a post a couple of days ago and *nothing* ... do you find this is forum is used? 

    Any suggestions on alternate forums?

    Thanks!!!

     

    0 639
    • DB-4433
      Paul_Vannatto

      Hi Douglas @DB-4433 


      Welcome to the forum. To be honest, most of the posting involves the digital mixers, TC Helicon products and the new synthesizers. I haven't used one of those Virtualizer Pro effects units for a number of years. But if I recall, you can only use one preset at a time. If you do want to use EQ, compressor, and other effects simultaneously, I would suggest you consider getting one of the X-Air digital consoles, such as the XR12. Each channel has a gate, EQ and compressor. Plus there are 4 FX slots that you can populate with the numerous type of FX built-in (56 to be exact). In fact the FX engine is identical to the one in the X32. 


       

      • January 22, 2020
  • Buchanfarmer
    Contributor - Level 1
    2019-10-01

    I have an MDX 4400 from brand new but I can’t find the documentation of how to use it.

    serial no - M0132161043, date code -109.

    please where can I find the docs to download?

    thanks, Doug.

    0 186
  • Jsobhani
    Contributor - Level 1
    2019-08-14

    I have some issues with the effect board on this unit and need to know how I can get hold of anothre board so I can replace this broken one. Thanks.

    0 171
  • UUBill
    Contributor - Level 1
    2019-11-06

    Our church has used a Behringer DEQ1024 for a few years. Just recently, it has begun to—for want of a better word—scream at us when we reach a clipping level. Does anyone have any ideas? See video for demonstration, but turn down your speakers (you've been warned!). TIA, Bill

    read more...
    0 163
    • UUBill
      KenMitchell

      Hi Bill ( @UUBill ), 


       


      Welcome to the community.  Wow!  That's definitely going into my sound effects collection.  It appears you have a feedback loop somewhere in your system.   Has anything position wise changed in your setup? By position wise, I mean microphones relative to PA speakers? The first thing I'd do would be to change the meter from "Out" to "In" so you can see the levels coming in.   Next, I'd take picture of your current fader settings, then drop all of the faders to nil, and see if it still happens.  If not, bring the frequencies up a few at a time until it occurs.  That should tell you where the feedback is occuring. 


       


      Hope this helps,


      Ken

      • November 6, 2019
  • McElviss
    Contributor - Level 2
    2020-02-06

    Hi, we use an Xr16 for our gigs that are mainly in pubs/bars. We have one vocal mic, one kick drum mic, one guitar DI and occasionally one or (very rarely) two overheads on the drums. The mixer feeds 2 x B115Ds and 2 x B1500XP subs. What's the best way to plug the FBQ2496 in for best effect to give us the most headroom on the vocal mic without affecting the guitar sound (obviously we WANT guitar feedback!)? Is it to put it across the MainLR, or just plug the vocal mic into one channel of the FBQ? Or do we need to start routing sends and returns via the AUX ports to just get the vocal channel going through the FBQ?

    read more...
    0 151
    • McElviss
      RexBeckett

      @McElviss 


      The FBQ2496 has line-level inputs and outputs so you cannot connect the vocal mic directly to it. You will need to route the vocal mic to an Aux output, connect that to the FBQ input and take the output to a spare XR16 input.


       


      You should disconnect the original mic channel from the Main LR mix - open the channel Main tab and click the LR button to turn it off (grey).

      • February 5, 2020
    • McElviss
      McElviss

      Thanks Rex. How is best to configure the spare channel the FBQ is plugged into? Switch all the EQ and stuff off and set the channel gain and fader accordingly? Or is it possible to route the input channel directly to MainLR bypassing any of the channel strip?

      • February 5, 2020
    • McElviss
      RexBeckett


      @McElviss wrote:


      Thanks Rex. How is best to configure the spare channel the FBQ is plugged into? Switch all the EQ and stuff off and set the channel gain and fader accordingly? Or is it possible to route the input channel directly to MainLR bypassing any of the channel strip?





      @McElviss 


      Yes you could turn EQ and dynamics off on the FBQ return channel. You could use a pre-fader send from the original vocal channel to the Aux out so the channel fader is not used. Then the fader on the FBQ return channel becomes your vocal fader. If you reassign the channel inputs, you could have the FBQ return in the same channel position as the vocal mic input and place the vocal send channel in a less conspicuous position.

      • February 6, 2020
    • McElviss
      McElviss

      I imagine the FBQ output is a line level signal, so I wouldn't need an input with a preamp?

      • February 6, 2020
  • luchenbe
    Contributor - Level 1
    2019-10-02

    Hi, I use the DCX2496 PC software to control 2 daisy-chained DCX-es, the first connected via RS-232 to a PC running Windows 10 and an RS-485 link between the first and the second DCX. This works fine if I use a PC with a normal serial port, but on recent  notebooks without a serial port it does only see the first DCX when used with a USB-serial converter (I tried 2) . This is for both the older version of the DCX as for the latest generation. Maybe the DCX2496 terminal software does not work correctly with such adapters ? Is there a solution to this annoying problem or can Behringer adapt the terminal software (I use version 1.16a) so that it would work with such a setup?

    read more...
    0 144
  • marcpinion
    Contributor - Level 1
    2020-01-12

    How many fx can you use at one time. If more than one are they serial or parallel. 

    0 135
    • marcpinion
      DB-4433

      Any luck with this?  I'm interested in both an EQ and Compressor together.  Thanks!


      DB

      • January 20, 2020
    • marcpinion
      DanB

      I am also trying to find this answer. For my new X2222usb mixer. Only one at a time, is that right? Unless  you choose a mix preset like #15 Delay-Reverb which is difficult to control. The delay (echo) goes on and on and I can't find a way to control it.


      Thanks for any help!

      • March 12, 2020
  • Yomexer
    Contributor - Level 1
    2019-12-12

    Hi! I bought the Behringer Crave and DR600 and they will be arriving next week. I have 0 experience with synths. What cables do i need and how do i need to connect them to hear the crave with reverb in my headphones?

    Thanks already for the help!

    read more...
    0 82
  • DB-4433
    Contributor - Level 2
    2020-01-20

    FX 2000 New guy here ... thank you for your patience ...

    I'm using an acoustic guitar with a pickup.  I'm finding that when I play with some volume and finger pick, if I pluck the fifth-string A (440) the sound is loud and clear - but it keeps on going WAY too long.  This is only with the A string.  I'd like it to sound and then not really continue ringing for sixty seconds or more ... Would this be done through an EQ or a Compressor?  Suggestions on settings?

    Thanks!

    DB

    read more...
    0 59
  • ash70
    Contributor - Level 1
    2020-04-15

    Hi,

    This unit is quite old and I dont see ay updates in the software to add more features.

    Are any planned ?

    Also the dac chip is very old in this unit ak4393 I believe. Pls can this unit be updated to use the AKM4499eq chip from AKM. A lot of dacs have this chip now and it would be very nice to see this beautiful unit updated with the latest tech and processing available.

     

     

    read more...
    0 37