Statistics

165,420 members
161 posts
  • robriot
    Contributor - Level 2
    2020-04-04

    Hi

    I'm looking for instructions to allow me to figure out how crave works with Ableton. Is it possible or do I have to set the midi keyboard to work with Ableton to do that? 

    0 83
  • jsin
    Contributor - Level 1
    2020-02-03

    Using a new Behringer X-Touch Compact. Issue is the encoder knobs take two full wrist twists to go from 0-127 meaning I have to twist a knob twice to pan from left to right. If we grab a knob to sweep a filter or pan from left to right it's impossible to do it smoothly due ot having to twist the knob twice. It's basically taking twice the time to scan values from 0-127. Is anyone else having this issue? Sweetwater said their other units behave the same way. I cannot imagine an audio engineer putting up with this. Anyone know what's up? How do I make the knob behave normally (meaning a twist from 7 oclock to 5 oclock) ? Hoping to hang onto it. Need insight...  

    read more...
    0 79
    • jsin
      KenMitchell

      Hi Jason ( @jsin ), 


       


      Welcome to the community.  Are you using it with a mixer or with a DAW?  If a DAW, what DAW are you using?  Depending on the DAW, you may be able to increase your step size for the encoders. 


       


      Hope this helps, 


      Ken

      • February 3, 2020
    • jsin
      jsin

      Hey KenMitchell , 


      I'm using with Abelton Live. I tried both MC & Hui mode. Tech support @ Sweetwater said they were experiencing the same issue. I spent two nights trying to find a solution. I've looked up scripts etc. but have never made or edited a custom controller script. Seems like an whole other can of worms. Are you aware of a way to make it work? Many thanks...  

      • February 3, 2020
  • McElviss
    Contributor - Level 2
    2020-01-08

    Hiya,I wonder if anyone can help me? I'm trying to programme a FCB1010 to send midi commands to an Xr16, mainly to mute the MainLR and the FX Sends and/or returns. I'm a complete midi novice and it's a tortuous journey, I'm struggling to follow any of the insstructions and when I think I've cracked it, I can't equate what you load into the pedal to what the Xr16 manual says it wants.  Is anyone able to give me a simple, idiots-guide, step-by-step instruction? I mean, the X216 manual doesn't say anything about Programme Changes or Channels, but that seems to be the first thing in the FCB1010 setup. AAARRRGGGHHH!

    read more...
    0 78
    • McElviss
      Paul_Vannatto

      Hi David @McElviss 


      Here is the definitive midi chart for the X-Air consoles. As you can see, muting channels, etc. require CC commands, not Prg Change commands. The latter is used only to load snapshots. From what I can see in the FCB1010 manual, it only works with Prg Change commands. So the 2 are not compatible. 


       

      • January 8, 2020
  • Ken_HK
    Contributor - Level 1
    2020-03-14

    Hi Folks,

    I use X-Touch with Logic Pro as a Control Surface. The basic setting on X-Touch is "MC" and "USB".

    As I use Logic Pro to set various controls using "MODIFY + FUNCTION" keys on X-Touch, the related buttons always light up. I have tried many ways to try switch them off but failed. The only way is to set up again, both X-Touch and Logic CS.

    Could anyone help solve it.

    Thanks.

     

    read more...
    0 74
  • jcsy
    Community Manager
    2020-08-26

    This is a post with an image in the body. This should not have a second image.

    0 69
  • PatrikBouldin
    Contributor - Level 2
    2020-05-24

    HI, I know I can set FX1-4 levels on the X-touch, but I can't seem to find how to adjust the FX output (this would be the bottom far-right fader on the Xedit app, where you select either MAIN LR, Bus1-5, or FX1-4). Where on the X-Touch do you set the FX OUTPUT (not the input)? Any help?  I uploaded a picture of where I would do this on the X-edit app.

    Thanks - Patrik

    x-edit.png
    read more...
    0 69
    • PatrikBouldin
      RexBeckett

      @PatrikBouldin 


      The fader in your screenshot is the FX1 Send Master. This can be adjusted on the X-Touch by selecting the fifth fader bank (FX1-4/DCA1-4) and using faders 1..4 for FX Send Masters 1..4.

      • May 24, 2020
    • PatrikBouldin
      PatrikBouldin

      Rex, thanks VERY much, that did it. Hey question - is there actually a (real) users manual somewhere? I could only find a very short / shallow guide. Searched around.


      What am I missing on this stuff? There was no clue that faders 1-4 on the 5th fader bank controlled the FX master output!!! 


      Thanks again,


      Patric

      • May 24, 2020
    • PatrikBouldin
      RexBeckett


      @PatrikBouldin wrote:


      Rex, thanks VERY much, that did it. Hey question - is there actually a (real) users manual somewhere? I could only find a very short / shallow guide. Searched around.


      What am I missing on this stuff? There was no clue that faders 1-4 on the 5th fader bank controlled the FX master output!!! 


      Thanks again,


      Patric





      @PatrikBouldin 


      The functions are listed in the Firmware Version 1.15 Release Notes from X-Touch Downloads. 

      • May 24, 2020
  • raisingabel
    Contributor - Level 1
    2020-01-29

    I have a Dell Spectre 360 that is a lot faster than my pc for recording. I want to migrate to my laptop. It only has USB 3.1 or thunderbolt or USB type C gen 1.   What do I need to get this done. Suggestions?

    0 66
    • raisingabel
      DaveMorrison

      @raisingabel 


      A USB A to B cable for the normal USB port. A USB C to B cable (or USB C to A adapter & normal A - B cable) for USB C. USB 3.1 is backward compatible with USB 2.

      • January 29, 2020
  • lwhite2
    Contributor - Level 2
    2020-03-07

    I have a brand new X-Touch Mini and the Editor.  I have setup the layer A for Program Changes on all the buttons.  The editor only allows Momentary actions, which makes sense.

    But I found that buttons 1, 3, 9, & 11 are in toggle mode which mean it lights up and holds the light until released, and it takes two presses to change the state.

    Any suggestion on why this behavior?  Should I be trying it with CC where the options open up for toogle/momentary to force it over?

    read more...
    0 66
    • lwhite2
      lwhite2

      I tried what I suggested, and it worked.  I changed the buttons from Program Change to CC and ensured they were setup as Momentary, and dumped it to the layer.  I then reverted back to my previous edit with PC, and they are all Momentary now.


      I would consider this a bug, since the Editor isn't reflecting the full state.  Let me know otherwise.

      • March 7, 2020
  • KenMitchell
    Rock Star - Level 3
    2020-02-08

    Hi All, 

     

    I'm looking at selling an X-Touch and an X-Touch Mini and I'm wondering where a good place would be to sell those?  I've found several sites that operate off of commission and I'd prefer to pass the savings along to the end user vs. paying a commission.  

     

    Any guidance would be appreciated. 

    Ken

    read more...
    0 65
  • crowdpleasers
    Contributor - Level 1
    2020-01-21

    have trouble creating support ticket.

    just spins and spins after i hit summit

    0 64
    • crowdpleasers
      HolyDetonator

      Hi,


      I hade the same problem as you the first time i tried to register an unit. I tried again and again and again. I


      couldn´t made it and start getting thoughts like, to throw out my new mixer.


      If you follow exactly how to register in the video on the support page were you create your ticket - i promise you will make it too. Take it easy and do it - step by step!


      I wish you good look my friend.

      • February 29, 2020
Go to page