Statistics

165,420 members
156 posts
  • Liamtip
    Contributor - Level 3
    2019-10-24

    hi guys, i am using my x-touch mini with Traktor to control 3rd deck and my FX. with a bit of midi mapping i have added a lot of functionality but its hard to tell when a button is pressed without looking at the screen

    is there a way to light up the buttons when they are toggled on? 

    thanks all!

    read more...
    0 407
    • Liamtip
      Liamtip

      ok. i wasnt using the editor right. i now have layer A all working as i want. but when i duplicated it to layer B now i just have 2 identical sets of inputs - layer a or b is irrelevant. if i try to remap is saying for example layer A knob 1 is the same as layer B knob 1.


      i thought that with layer a pressed or b it would send a diff signal?!

      • October 24, 2019
    • Liamtip
      KenMitchell

      Hi Liam ( @Liamtip ), 


       


      Welcome to the community.  Since you duplicated Layer A to B, why would you think they would be anything other than identical?  The layer data is the MIDI message assignments as well as the button/encoder behavior.  What you need to do is load the default Layer B settings, modify the button behaviors like you did for Layer A, then load those settings into Layer B. 


       


      Hope this helps, 


      Ken

      • October 24, 2019
    • Liamtip
      Liamtip

      thanks Ken, yes i think i misunderstood the app and messed it up initially. 
      i also have an issue where its now not always remembering the settings flicking between layer A and B on the encoders. 

      • October 24, 2019
    • Liamtip
      KenMitchell

      Hi @Liamtip ,


       


      Can you upload your .bin files so I can have a look at them?  You'll likely have to .zip them up since I'm not sure the file upload option allows the .bin file extension.  Use "Choose File" in the lower-left to upload the files. 


       


      Ken

      • October 24, 2019
    • Liamtip
      Liamtip

      thanks ken. 


      i want some buttons to be toggled (fx on off) and some to be just single hits (for pads) 
      now i seem to hit a toggled button and it turns the light  on/off but the doesnt FX btn doesnt work until i hit it a 2nd time putting it all out of sync until i press again. which is odd. i also use the encoders being pressed down for same midi signal and they work fine in 1 shot. maybe its the toggle? seems there is a lack of sync somewhere. 


      also when i load up traktor doesnt know the encoder settings etc like it does if i use my keyboard's midi controls. toggling lights seems to be the issue maybe? 

      bins.zip
      • October 24, 2019
  • bettsaj
    Contributor - Level 3
    2019-09-19

    I've just bought the behringer UMC22 as it was advertised to be good value for money, there is however an issue that has been highlighted on an Amazon review. Inst 2 doesn't work after setting up. 

    I'm using the interface with guitar rig 5 and it works a charm if i plug the guitar into Line 1, but when I plug into inst 2 i get a signal i.e the green signal light flashes but no audio at all. this hjas been raised on Amazon after I checked some of the reviews, and aledgedly behringer are aware of this issue.

    Any ideas for a fix as I'm on the verge of sending this back for a refund if I can't get it working as it should.

    read more...
    0 320
    • bettsaj
      BrianLowe


      @bettsaj wrote:


      I've just bought the behringer UMC22 as it was advertised to be good value for money, there is however an issue that has been highlighted on an Amazon review. Inst 2 doesn't work after setting up. 


      I'm using the interface with guitar rig 5 usps tracking and it works a charm if i plug the guitar into Line 1, but when I plug into inst 2 i get a signal i.e the green signal light flashes but no audio at all. this hjas been raised on Amazon after I checked some of the reviews, and aledgedly behringer are aware of this issue.


      Any ideas for a fix as I'm on the verge of sending this back for a refund if I can't get it working as it should.





      Same issue here too. Help is appreciated.

      Thanks in advance,
      Regards


      Brian

      • October 19, 2019
  • soundcheck
    Contributor - Level 2
    2019-10-16

    hi, I have a new x-touch mini. after editing the layers with xtouch edit y have problems with the mcmode, it doesn´t send mi de cc mesagges as well. How can i do a factory reset?

    thanks

    PD. sorry for my inglish..

    0 228
    • soundcheck
      KenMitchell

      Hi Mikel ( @soundcheck ), 


       


      Welcome to the community.  When you extracted the X-Touch Editor zip archive a folder called "default layer" should have been created.  In that folder is "compact" and "mini". In the "mini" folder there are two files called LayerA.bin and LayerB.bin.  Load these presets into the X-Touch Mini using the X-Touch Editor. This will restore the factory defaults. 


       


      Ken

      • October 16, 2019
  • SamsMusicFactor
    Contributor - Level 2
    2019-08-08

    Hi! I bought the X-Touch Extender and I am planning to use it exclusively for the cc midi controllers spaecially CC#1,7,11,21 . I tried my best to let it work but with no luck. I am using Logic pro x and I don't have any other x-touch controllers.

    Please advice!

    Thank you

    read more...
    0 222
    • SamsMusicFactor
      DaveMorrison

      Hi @SamsMusicFactor 


      The extender is not programmable. You'll have to make your assignments in Logic. I would try Ctrl mode first.

      • August 8, 2019
    • SamsMusicFactor
      SamsMusicFactor

      Thank you! @DaveMorrison! It worked on kontakt with libraries but not yet with Logic on CC midi controllers. When using MC mode it works with logic.

      • August 9, 2019
    • SamsMusicFactor
      DaveMorrison

      @SamsMusicFactor 


      The Extender is a weird beast. The only thing it seems to do well is MC (at least in logic). The reason I think Ctrl mode might work is that the Faders transmit CC in this mode as opposed to PitchBend when in MC mode. I think you would have to assign every Knob, Button and Fader in Logic to do what you want. @KenMitchell's advice is very sound as the compact is more versatile.

      • August 9, 2019
    • SamsMusicFactor
      DaveMorrison

      @SamsMusicFactor 


      Nothing on the Extender can be changed (apart from the operating mode).


      Have you tried something like this: https://www.youtube.com/watch?v=Bm77G15H6zo

      • August 11, 2019
    • SamsMusicFactor
      SamsMusicFactor

      @DaveMorrisonYes! I tried this and it works on instruments or any knotakt library, you can easily assign faders or encoders to already programmed libraries or intruments inside Logic. But I can't find a way to program midi controllers CC#. Maybe there is a way OR AS YOU GUYS SAID IT'S NOT RE-PROGRAMMABLE !!

      • August 12, 2019
  • Jaxsn
    Contributor - Level 2
    2019-10-09

     

    To start, I ‘ve already set my X-Touch internally to “Mackie Control and USB”

    And did the same for my DAW (Digital Performer 9)

     

    1. Even when my X-Touch is disconnected, from the computer,

    When I turn on the power to the X-Touch and move any fader to any position,

    after about two seconds the fader returns back to the zero position.

     It does the same thing when my X-Touch is connected to the computer.

     Thank you in advance for your help.

     

    1. When the X-Touch is powered on,  I get no colored lights.
       whether is connected to the computer are not.
       All I get are the lights to the scribble  Strip  and the jog wheel.

    Thank you in advance for your help.

     

     

    1. I don’t know if this makes a difference to my problems I’m having,

    With my X-Touch, but I only have my X-Touch connected via a USB cable.

     When I set up the control surface section in Digital performer version 9,

    it identifies my X-Touch connection options:

     

    As “INT-1” (I am assuming this is for the input selection)

    And

    As “EXT-1” ( I am assuming this is for the output selection)

     

    Also my X Touch is located In the “unconfigured ports section.”
    I will try to research what this means.

    Thank you in advance for your help.

     

     

    read more...
    0 203
    • Jaxsn
      KenMitchell

      Hi @Jaxsn ,


       


      When not connected to a computer the faders on my X-Touch act the same way.   By lights, I assume you mean the button LEDs. This is also normal when not connected to a computer and when not properly configured in a DAW.  There's nothing to tell the button LEDs to light up. 


       


      I don't use DP but I'll see if I can download a trial version to help you out.  Are you on Windowss or Mac?


       


      Ken


       


       

      • October 9, 2019
  • ConnorHolden
    Contributor - Level 2
    2019-09-27

    Hi Guys,

     

    Loving my X Touch and wanting to connect some footswitches but can't find any info on what is compatible.

    I have a couple of non-latching switches, but they don't seem to be working...

    Any advice?

    read more...
    0 189
    • ConnorHolden
      RexBeckett

      @ConnorHolden 


      What are you controlling with the XTouch? I believe the footswitch and expression inputs only work in MC and HUI modes - controlling a DAW. The footswitches would normally be momentary (non-latching).

      • September 27, 2019
  • Ruhrton
    Contributor - Level 2
    2019-07-03

    Hi, there are no correct measurements of the X-Touch to be found - for a custom case and overlay series, I'd need technical drawings with correct sizes. PDF, AI, DXF, whatever. Who can help me out, please? Behringer support, anyone? Cheers, RT

    0 185
  • Jaxsn
    Contributor - Level 2
    2019-10-08

    I am very disappointed in this x-touch product.
    I can not use this with digital perform 9........
    After I plugged the USB in, the x-touch is just a $600
    paperweight I wish I knew this ahead of time.
    I'm going back to my BFC & BCR 2000, or a different brand.

    can anyone help me

    read more...
    0 184
    • Jaxsn
      KenMitchell

      Hi @Jaxsn ,


       


      Welcome to the community.  What research have you done? Have you visited any site to find out what others have been able to do with DP9 and the X-Touch? 


       


      You might want to Google "x-touch digital performer 9" or mackie mcu pro digital performer 9". 


       


      The X-Touch is a Mackie MCU Pro clone with improvements. 


       


       


      Hope this helps, 


      Ken


       

      • October 8, 2019
    • Jaxsn
      DaveMorrison

      @Jaxsn 


      As Ken mentioned, The X-Touch is a clone of the Mackie Control. Since these units are dumb (not programmable), all functionality is supplied by the DAW (DP). The best place to ask these questions is at motu nation.


      Are you using a mac or PC? 

      • October 8, 2019
  • AyChords
    Contributor - Level 3
    2019-07-22

    Hi guys, how do I view the remaining of my Aux buses on XTouch? I am able to see Aux 1-8, but can’t view the remaining Auxes. I’ve tried the navigation buttons, not working.

    0 183
    • AyChords
      DaveMorrison

      @AyChords 


      Are you connected to an X32 or X-air (or Midas equivalent) mixer?


      Or are you connected to a DAW? If so, which one?

      • July 22, 2019
    • AyChords
      AyChords

      DAW, Samplitude Pro X4 Suite

      • July 22, 2019
  • PeterDeClippel
    Contributor - Level 3
    2019-09-26

    Hi,

    I remember seeing somewhere you can switch the x touch between using it as a mixer controller (XR18) and a DAW controller. But I don't remember and can't find it...

    Is this possible? I work with ableton live and use the XR18 as audio interface. I need control both over the interface and ableton live, and it would be awesome to do this with 1 controller!

    thanks

    read more...
    0 182
    • PeterDeClippel
      DaveMorrison

      @PeterDeClippel 


      Yes. Hold down Select on channel 1 as you power up. Then choose Xctl/MC (and the networking mode or MIDI DIN connection to the XR18). 


      Press the SMPTE/Beats button to switch between XR18 and DAW.

      • September 26, 2019
Go to page