Statistics

165,429 members
180 posts
  • Capntedy
    Contributor - Level 1
    2020-02-17
    I have an Older Euro desk Behringer SX3242FX date code 0812 , I was wondering if anyone would have one that is parted out or able to part one out. I would like to find the main board that the effects module plugs into and a Power supply that is in good shape. Anyone who can help would great! Mine works but has weakness in signals getting through at times. to the sub outs. The power supply also has a busted or a loose power in connector that is usable but I would like to fix.
    read more...
    0 32
  • KGW1970
    Contributor - Level 1
    2020-03-31

    Greetings all, 

    Hope this has not been asked and answered already, if so, I appoligise.

    I have sterero audio going into 11/12 on my mixer (QX1832usb).  I can hear in INBUILT FX processor by using the FX RET slider and adjusting my channels FX rotary knob and effects processor level rotary knob no problem.

    The problem I have is I ALSO have a Behringer  VIRTUALIZER 3D processor connected to the effects out and return on the rear of the unit.   I can hear the effects on my MAIN MIX but NOT on my headphones.

    Any ideas how to fix that ??

     

    read more...
    0 32
  • PatrickGMaillot
    Valued Contributor - Level 2
    2020-02-08
    Using a Stream Deck device with X32ReaperAutoMate! V1.006 will soon be available for users of the licensed version and include support for this. X32XLiveAutoMate is already compatible as of V1.002. See it at https://youtu.be/sQ8MwkfGUdg -Patrick
    read more...
    0 31
  • calebhorains1
    Contributor - Level 1
    2020-06-09

    Hey everyone, 

    I need some guidance...

    Disclaimer; I'm extremely new to the X32 workflow so keep in mind I'm a total n00b. 

    I'm hoping to use the card out to send audio into Ableton to have control over a seperate mixdown for a live stream, then send the Ableton into OBS. 

    I was able to configure the USB card to send audio into Ableton but it sounds AWFUL. I'm getting lots of glitches, stutters, pops, weird bleeps and boops, lots of distortion. I suspect I'm doing something wrong becasue I have a 2019 MB Pro with up-spec'd ram, beefier processer, etc., and the X32 is less than 6 months old (purchased brand new).

    Any ideas would be very much appreciated... 

    read more...
    0 31
    • calebhorains1
      RexBeckett

      @calebhorains1 


      Hello Caleb, welcome to the community.


       


      First check that the Ableton project is set to the same sample-rate as the X32. You may also need to set larger buffer sizes. I don't know if you can do this through Ableton or you need to use the macOS Setup -> Audio Midi tool.

      • June 9, 2020
    • calebhorains1
      calebhorains1

      Thank you sir,


      I made sure everything matched and tried every buffer size Ableton can process. It got a little better, but not much... 

      • June 9, 2020
  • AlbertoTemich
    Contributor - Level 1
    2020-05-15

    Hola!

    I got my mixer about a year and a half ago and I love it but, sadly, I still haven't been able to use it with my computer as I see some others use it in tutorials and videos. I downloaded the ASIO driver but had no success. It continues to recognize it as a generic USB device.

    Can anyone help me to properly configure my mixer? I will really appreciate some help here.

    read more...
    0 30
  • hollywood
    Contributor - Level 3
    2020-04-30

    So, does anyone know when we can expect to see the DL8 stagebox?  

    0 30
  • Stevenflint
    Contributor - Level 1
    2019-11-02

    I would like to add some unpowered outputs to this. Behringer has sent me the schematic but has not been very helpful when I asked if my points on the PCB would work fine. Can anyone help with this? I'd like to add an unpowered main L/R and a monitor output like on most standard powered mixers. 

    read more...
    0 30
  • New
    Virn
    Community Manager
    2021-07-19
    1 27
  • Greenstar
    Contributor - Level 1
    2019-08-05

    Hello.
    I am French and I use Google to translate.
    I have just been offered a DX2000USB and I am delighted.
    I use it in studio production / broadcast webradio + personal listening.
    I would need the internal diagram "block diagram" table to know the internal routing of it.
    Does anyone have this pattern?
    Thank you.
    JC

    read more...
    0 26
  • dstormjr
    Contributor - Level 1
    2020-05-18

    Hello All.  I am in the process of trying to convert from an analog mixer to the Behringer X16 Air and I made it through all the technical hurdles; initial configruation, setup as access point, etc. However, my knowledge lacks when it comes to creating the scene for live vocals and a feed for A/V equipment.  Maybe on occasion run a keyboard, guitar and provide a feed for a box drum.  If I can get it close, it should help me tweek it the rest of the way.  Any help with this would be greatly appreciated.  Thanks.

    read more...
    0 25
    • dstormjr
      RexBeckett

      @dstormjr 


      Hello David, welcome to the community.


       


      To get started, take a look at some of these videos. They should help you to setup the channels, FX and monitor mixes. I recommend using XAir Edit for initial setup as it gives a better view of the configuration. 


       


      If you run into problems, save your scene and attach the .scn file to your post (see Choose File button below) and we should be able to help.

      • May 18, 2020
Go to page