Statistics

165,441 members
196 posts
  • nixx
    Super Contributor - Level 2
    2019-09-06

    It seems that if TC Electronic won't update their TC Near software, all users of Konnekt (and Impact Twin) audio interfaces are out of luck and won't be able to use their hardware with the upcoming version of macOS. If I'm not mistaken, macOS Catalina will support only 64-bit apps - and TC Near Control Panel is 32-bit

    Is there any chance TC Electronic will update TC Near to support for 64-bit only operating systems? It would be a shame to have all those killer audio interfaces bricked...

    read more...
    8 3,651
    • nixx
      yann_

      I agree. but it seems they are not involved in this forum at all. 


      I think it's more for users, cause if you check most posts don't even get replies, sometimes if ure lucky a user will help you out but Tc's staff have not seen em around. 

      • October 3, 2019
    • nixx
      lello88

      Hello, updated yesterday to OSX Catalina, my  Impact Twin unfortunately does not work, I sent an email to the support, I hope to receive an email from the support, greetings

       


      • October 10, 2019
    • nixx
      LB

      I own a Studio Konnekt 48 and I really love that interface. It is perfect for my recording needs, sounds great and has reasonable latencies. 


      It is a real shame, that TC Electronics don't support this fairly new product. In a time where everybody's talking about the environment and saving resources, it just doesn't seem right that I have to throw away a perfectly good (great actually...) audio interface, just because I wish to upgrade the software on my Mac. 


      Next time I buy an audio product I guess I will spend some time checking out the "end of life" policies of the manufaturer. The software support should last at least as long as the life expectancy of the hardware product.


      I always thought of TC Electronics as a serious and trustworthy manufacturer, but this time you have really let me down...


       


       

      • October 14, 2019
    • nixx
      LB

      I wonder if TC even exits anymore, after they have been ackquired by Behringer.. 

      • November 25, 2019
    • nixx
      hakanbahadir

      I have the same problem, luckily I was the Beta tester of Catalina and could be able to turn back to previous version. I can not use Catalina just because of this hardware and it is not acceptable.


      TC please answer us with a solution.


      Hakan

      • December 12, 2019
  • InactiveUser
    Contributor - Level 2
    2012-09-29
    I'm struggling to get Sonar 8 to control the surface on my X32. I can get audio in (via FiWi or USB), but can't control the surface.


    I've set up the surface as a Mackie Control in Sonar, and set up the X32 Remote page as 'Remote Button Enable', Protocol 'Mackie Ctrl' interface as 'Card MIDI'.

    I've got 'REMOTE' button pressed on the X32 and the 8 'bus' faders are all showing 'mute'. I can press 'DCA' and get the transport control on the displays, so it looks like it should work. But it doesn't.

    Any ideas?
    read more...
    0 3,317
    • InactiveUser
      JoeSanborn Hi,

      After testing Sonar with the X32, I can say that it appears this is an issue with Sonar.

      We have contacted Sonar and made them aware, as the X32 is fully compatible with HUI and works fine on ProTools, Logic and Reaper.

      I have also looked at the MIDI data coming out of the X32 and it is sending the correct commands.

      This document may help with other DAW solutions on the PC as well:

      https://www.dropbox.com/s/xtbjbtf117...0functions.doc



      I will post anything we hear back from Sonar.



      Best

      Joe Sanborn

      Manager, Channel Marketing

      MUSIC Group

      BEHRINGER
      • November 1, 2012
    • InactiveUser
      MarioSosa Hola, he intentado varias configuraciones de control DAW sin éxito entre SONAR y mi X32 ... Es bastante raro, ya que antes tenía 2 BCF 2000 con SONAR 8.5 que nunca me dieron ningún problema! Agradecería consejo al respecto, ya que me deshice de los BCF xq la x32 los reemplazaba.

      Otra duda es cómo configuro el X32 para grabar POST dinámica y eq. Disculpen mi ignorancia, pero no me queda claro el ruteo.



      Gracias.

      salu2



      La configuración que estoy usando va más o menos así: x32, mackie mr8, powerplay pro, intel i7 3770k, visiontek 3870x2, 16Gb Ram, HDs (7200 rpm) sobre 7 ultim 64 bits. DAW Sonar (no quiero cambiar de DAW, ya que estoy acostumbrado y muy a gusto)
      • January 9, 2013
    • InactiveUser
      GlennSlater Después de probar Sonar con el X32, puedo decir que parece que este es un problema con Sonar.

      Nos hemos comunicado con Sonar y les hemos hecho saber, ya que el X32 es totalmente compatible con HUI y funciona bien en ProTools, Logic y Reaper.

      También he mirado los datos MIDI que salen de la mezcladora X32 y está enviando la informacion correcta.

      El siguiente documento puede ayudar con soluciones de otros DAW en el ordenador.:

      https://www.dropbox.com/s/xtbjbtf117...0functions.doc
      • January 10, 2013
    • InactiveUser
      MarioSosa Gracias por tu respuesta Glenn !! pero link a documento dropbox me tira invalido. Sigo tratando de configurar x32 para grabar luego del bloque de control de dinámica. Me podrías orientar al respecto. Gracias!!

      salu2

      Mario, desde Mza, Argentina.
      • January 10, 2013
    • InactiveUser
      MarioSosa Encontré la solución para control DAW SONAR .... Simplemente seleccionar VS-700 en vez de mackie control .... A mí me fincionó. http://forum.cakewalk.com/tm.aspx?m=2679018



      Salu2

      Mario.
      • January 15, 2013
  • VinceBigos
    Contributor - Level 1
    2015-03-30
    Hi,

    I have been trying to record using the 302USB (brand new) hooked up to Garageband on my Mac. I have my headphones plugged into the mixer.

    Here is my current setup.

    SM57 mic > LXR input on 302USB > MacBook Pro > Garageband

    1st problem: I keep hearing the faintest (yet incredibly distracting) clicking noise in the left phone of my headphones. It will last for about 10 seconds, go away, then return. It's not any kind of metronome from Garageband that I forgot to turn off.

    2nd problem: about every 30 seconds I hear a loud beep in my headphones. I don't think it has anything to do with signal clipping b/c neither lights that would indicate this on the mixer or Garageband turn red.

    I thought this problem was related to the Garageband, but I would turn the program off and watch a video online with headphones through the mixer, and the beep would return. Could it have anything to do with sound output from the computer?

    -Vince
    read more...
    0 3,218
    • VinceBigos
      SeanFairchild Dear Vince,



      That sounds to me like an issue with the connection between the 302USB and the computer. On a Windows machine I would suspect the driver or the driver's buffer settings as causing this, but I'm no Mac expert Feel free to reach out to our CARE team at [email protected] or by phone at +1-702-800-8290 (US) or +44 1562 732290 (UK) for more assistance if you like!
      • April 2, 2015
  • InactiveUser
    Contributor - Level 2
    2012-08-22
    This looks great, just wondering if there will be a future update to include controlling other parameters. I use a console now that allows control over almost everything with my ipad. Eq, compression and gating on all channels and buses! Its great to be able to make changes anywhere in the room, or ringing out the monitors with an ipad, that is something I just love and will not sacrifice. I will switch in a heart beat if this is in the works.
    read more...
    0 2,602
    • InactiveUser
      BobHarvey Agreed ... I'm ready to move from my Presonus Studio Live to the X32, but I have gotten spoiled to moving about the room with the iPad able to control all dynamics.



      Additionally, it would be convenient to have an iPod & iPhone app for the folks on stage to readily adjust their monitor levels.
      • August 26, 2012
    • InactiveUser
      ChrisPainter Hi guys!



      We just wanted to let you guys know we have Version 1.2 available for the XiControl iPad app on iTunes. Of course, there will be lots more updates to come in the future, but we have some significant improvements for you guys on this one!



      XiControl Version 1.2



      What's New in Version 1.2

      * Channel Parametric EQ Control – fine-tune EQ from anywhere in the room

      * Expanded Metering - whether you use the iPad remotely or at the console, levels at a glance

      * Customizable positioning of the Home/Detail/Setup tabs prevents accidental operation

      * Reset panorama to center by double-click on Pan control

      * Precision Numerical info display above detail parameter sliders

      * Bird's Eye View of all faders and meters in Page Select row for quick view of all channels



      IMPROVEMENTS



      * Touch recognition performance improvements

      * Home button function now also on the XiControl icon

      * Channel Sends page now shows the bus color and assigned names

      * Selected bus for the Sends-on-Faders function is now displayed with color, assigned name and icon





      Best,
      • November 26, 2012
    • InactiveUser
      InactiveUser Thanks Chris.



      It looks really great.

      I have not tried it only yet, but at least offline there seems to be a lot of bugs.

      -Minifaders not updating

      -Low cut showing a an odd curve on the eq display

      -only bus 1-8 named by deafult



      But great features!! I'll try to test them live tomorrow.



      One thing I just noticed. If im using eq band four as a VEQ and want to change that to PEQ and I might have some unwanted effect while changing as I have to tap trough the low cut etc. I can't see a way to implement it better without loosing the flexibility but maybe someone can come with an idea.
      • November 27, 2012
    • InactiveUser
      DaleWaite I was wondering when you were going to update the Ipad App. It was working great until the iphone 5 came out and Apple upgraded their Ipad to work with iphone 5. This caused your App to not show faders on some of the pages. I performed the upgrade and now this bug is fixed. Thanks again.





      Chris Painter;1466 wrote:

      Hi guys!



      We just wanted to let you guys know we have Version 1.2 available for the XiControl iPad app on iTunes. Of course, there will be lots more updates to come in the future, but we have some significant improvements for you guys on this one!



      XiControl Version 1.2



      What's New in Version 1.2

      * Channel Parametric EQ Control – fine-tune EQ from anywhere in the room

      * Expanded Metering - whether you use the iPad remotely or at the console, levels at a glance

      * Customizable positioning of the Home/Detail/Setup tabs prevents accidental operation

      * Reset panorama to center by double-click on Pan control

      * Precision Numerical info display above detail parameter sliders

      * Bird's Eye View of all faders and meters in Page Select row for quick view of all channels



      IMPROVEMENTS



      * Touch recognition performance improvements

      * Home button function now also on the XiControl icon

      * Channel Sends page now shows the bus color and assigned names

      * Selected bus for the Sends-on-Faders function is now displayed with color, assigned name and icon





      Best,
      • November 27, 2012
    • InactiveUser
      InactiveUser One key feature this app needs is access to the output delays.



      Personally I find using an iPad to remote to a computer running x-Control to be a much better remote than the iPad app. I do this also with other digital desks with offline software. IOS is a very limited operating system, using the iPad as a remote to a computer running the consoles offline software live yields far greater control, the only difference is you give up multitouch, but this is moot for system tuning and setup or soundchecks.
      • November 29, 2012
  • RobertDorn
    Contributor - Level 2
    2020-01-12

    Hey, anyone here know if the copilot app just will be for setting up sources and routing like discussed in the 'Complete Overview' Youtube from Behringer or if it -hopefully- will also be capable of controlling the whole mixer like with the M32 app. And will there be an accompanying Q-app, also like with the MX32 .  Actually just picked up an M32 with DL16 for only this reason. And already regretting buying a new M32 while the Wing with its processing capability exists. The moment they release the app(s) i'm swapping the M32 for a Wing but it really lacks on clear information on the app so perhaps someone here knows

    read more...
    1 2,437
    • RobertDorn
      MarcusLinden

      Hi


      does anybody have info about when the app will be releases?

      • January 18, 2020
    • RobertDorn
      jlwall

      Behringer peoples, where / when is the copilot app being released.

      • January 23, 2020
    • RobertDorn
      CalebHeath

      Any news on the control app and "Q variation app"


      also any news on the desktop control app? 

      • January 29, 2020
    • RobertDorn
      Paul_Vannatto

      Hi @CalebHeath , @RobertDorn , @jlwall , @MarcusLinden 


      There are various apps in the works. Most of them are being tested and will be released when the developers and testers feel confident that they are ready for public release. No ETA at this point. This includes the official Co-Pilot, Mixing Station, and X/M32 to Wing converter (a scene to snapshot converter). I can give you an ETA for the converter (since I'm the developer). If all goes well it should be ready for early next week. 


       


      Please understand that we are in the same stage of development that we went through with the X32 back in 2012 when the hardware preceded the software tools. Patience is requested.


       

      • January 29, 2020
    • RobertDorn
      hearitclear

      Hi Paul.  Let me know if you have interest in a beta tester.  We bought two and have one opened up at the shop, waiting for cases to send it out.  


      Most of my questions were in another thread.  


      So there will be future scene compatibility between X32 and X wing?  And setup configuration flowthrough as well?  That will be a biggest draw for clients entering wing usage from this platform.  Would be great to see that in "edit" software flowthrough as well.


      Thank you for your time on this.

      • February 4, 2020
  • marco_m_berlin
    Contributor - Level 3
    2019-12-17

    Hi, I am sure, Ulli Behringer is interested in every BUG in a TD3.

    i think he will never know - due to this non working ticket system.

    1. The slide function is not accessable via midi control.

    2. Slide speed is 4 times faster than with a tb-303 or any other clone in the world.TD3_vsTB03_CV_slide.png

     


    We need a firmware update. AND A FEEDBACK THAT YOU HEAR IT.
    Marco Mueller / Berlin / Germany

    read more...
    4 2,255
    • marco_m_berlin
      3phase

      they dont hear, and they dont want to hear. I will return the td-3.. 


      besides the slide behaviour is the smallest of the bugs..


      no1 is that writing of linked patterns is not working.. essentially crippeling the device to a one bar motiv only device.. inferior to the original 303, that does 4 bar motivs, and all good clones that do even 8 bars.. What is especially important on real time tap input, since this alows longer recording times and long held notes.. 


       


       


       


       

      • December 23, 2019
    • marco_m_berlin
      3phase

      and just too add a few more.. in case i am wrong and they really have a look here.. in this most deserted forum on the globe..


      no2 heavy bug)


      wrong handling of the pitch memory.. 


      On the original 303 each bank shares a pitch memory.. each pattern has its own start within the pitch memory.. when the number of pitches is exceeded by the time infos, the rest if the pitch buffer is used.. parts of neighboring patterns.. That results in musical usefull results.. as longer you write one bank as more likely all pitches fit harmonical. even your own style gets visible in the additional pitches used. Thats part of the musical ghost of the 303.. the td-3 just inserts low c notes in any case it dont knows what pitch to use.. thats unmusical programming that leads in 100% of the cases to unmusical results, that need manual edit/ repair. A big workflow killer, that makes stage writing too risky to be performed. 


      3.2) transpose flags of pitch memory get lost when leaving write without doing a time write/edit routine


      4) pattern transpose not working when leaving write mode without stopping


      5) tap write in external sync bug


       


       


       


       

      • December 23, 2019
    • marco_m_berlin
      marco_m_berlin

      New Firmware 1.2.4,  Slide Speed is correct now. Thanks to Behringer!


      Slide via Midi Control is still not availabel.  


       


       


       


       

      • January 6, 2020
    • marco_m_berlin
      HerrFuchs

      Yes please make for us a update.. Uli ❤️

      • January 19, 2020
    • marco_m_berlin
      B-Ry

      where do you download firmware from?


       


      thank you

      • January 28, 2020
  • HeikoKnuettel
    Regular Contributor - Level 1
    2019-10-02

    It should let me configure the D, the Odyssey and the VC340.

     

    VC340: Synth found, but update not possible ("Failed, check network and press to retry")

    Model D: Synth is not found

    Odyssey: Synth is not found

     

    All synths are present in the device manager and can be played via MIDI or USB.

     

    read more...
    0 2,172
    • HeikoKnuettel
      DannyBudts

      It has nothing to do with the synths themselves but with some computer systems. I had the same problem. I closed all other audio us-drivers in the device manager, than the synths were recognised, I could update, I opened all drivers again...fine.


      I opened a case for it, the asked me for all details, they are aware of it and they are working on it. 


      Hope this also works for you. 

      • October 2, 2019
    • HeikoKnuettel
      HeikoKnuettel

      Thank you very much, that worked!


      I hope they get rid of this auto-selection of synths. Even if it worked (which obviously isn't the case) it is annoying if you have more than one synth, you always have to turn the others off.

      • October 2, 2019
    • HeikoKnuettel
      ChrisRose

      It's not working here for me either. The Synth Tool sees that my Model D is connected, but when I click on "Update" all I see is version 1.1.1 and a box beneath that which says "Loading".


      Nothing happens for about a minute, then I receive the same message: "Failed, check network and press to retry."


      Capture.JPG


      I've tried this on two separate PC's, both connected to the interent, and I get the same result on both machines. One is running Windows 10 64 Bit (latest version) and the other is running Windows 7 64 Bit (latest version). 

      • October 3, 2019
    • HeikoKnuettel
      HeikoKnuettel

      Update doesn't work for me either, on none of the 3 synths. Deactivating other drivers helped so that the tool at least found them.


      I added a rule for the windows firewall, but to no avail, updating doesn't work.


      My D is on Firmware 1.1.1 too.

      • October 3, 2019
    • HeikoKnuettel
      Talos

      It see's my Odyssey and I can change all the settings and sequences but when I go to the update page I just get ("Failed, check network and press to retry")


      Please release the OS updates seperately till the synth tool is fixed, and the rest of the settings as sysex

      • October 5, 2019
  • DanDryden
    Contributor - Level 1
    2015-04-02
    I've seen a few comments from people who don't seem to know what the monitor switch does.
    My own experience mirrors this.
    When the UCA202 is connected to a USB port and I have active input but am not connected to recording software I can't hear the input with the monitor switch set to ON and the volume control up.

    When I launch Audacity I still can't hear the input with the monitor switch on.
    Only when I activate the recording mode can I hear the input signal no matter what position the monitor switch is in providing the volume control is turned up.
    I'm assuming this is the USB playback mode of the UCA202.

    Using Logic I can monitor the "input when connected to the software and assigning input to tracks from the UCA202 - I don't have to be in record mode.When overdubbing in Logic I can hear both the pre-recorded track and the new track but I'm having difficulty discerning what the switch does since I can hear both pre-recorded and overdub tracks with switch in either position and both are controlled by the volume control.

    Is this normal behavior for the UCA202?

    Thanks.
    Dan
    read more...
    0 2,065
  • ThorbenK13
    Contributor - Level 1
    2019-11-19

    Refering to the Behringer Wing:
    Anyone out here who could explain to me how the Stage Connet Works with just a normal XLR Cable with 32 Channels Bidirectional? 

    0 1,948
    • ThorbenK13
      KenMitchell

      Hi Thorben ( @ThorbenK13 ), 


       


      Welcome to the community.  I haven't seen any details but I suspect it works in a similar fashion to the way the cable companies are able to send digital channels down and also support cable modems on the same coax.  Digital data can be sent through the same wire (or in this case pair of wires) using multiple carrier frequencies. Since XLR cables aren't really digital communications cables, I suspect the distance will be limited somewhat.  The first I heard of it was on the Hub4. 


       


      EDIT: BTW, are you sure it's bidirectional?  The description seems a little vague. 


       


      Ken

      • November 19, 2019
    • ThorbenK13
      ThorbenK13

      What i heared although ist, that you don't need a Powersupply because they are sending Power over the Same XLR Cable. I can't believe that so many Informations and Power are able to go through a Standart XLR Cable. And then how would a break Out Box enable Phantom Power if there are condensator Mics in the Inputs? Any Ideas? 

      • November 21, 2019
  • noiseuk
    Contributor - Level 2
    2019-11-27

    Hi, I wonder if anyone can tell me if the Wing can use all 24 faders for DAW control or just 8 like the X32. I've scoured the internet but all the info seems very vague. Could someone from Behringer clear this up?

    I have 2 rooms that the Wing would be ideal for if it has full HUI - an amazing amount of features for the price!

    Thanks

    Phil

    read more...
    1 1,936
    • noiseuk
      noiseuk

      Just had this response from Behringer


      "The WING USB interface will provide three MIDI interfaces to the host PC, in order to emulate a MCU plus 2 Extenders for example. So yes, all 24 faders can be used for DAW control in addition to the Custom Controls and the big jog wheel.
      The exact MIDI implementation is just being defined and will be implemented in the coming months."


      Excellent news!

      • November 27, 2019
    • noiseuk
      Neochord

      ...24 fader for DAW Control....that's some pretty good news .


      I would like to know in detail what the Fader-resolution  will be (1024 steps or more?)...and wich motorfader will be installed in the Wing (Alps?)


      Greetings

      • December 3, 2019
    • noiseuk
      noiseuk

      Just seen a Behringer video which says the faders are not touch sensitive but 'motion' sensitive. Thats a massive disappointment. It reminds me of the horror that was 02r automation. I think that will rule this desk out for most of us in the post production world who use fader moves a lot.

      • December 5, 2019
    • noiseuk
      Gussss

      Its nots disappointing in fact pressure-sensitive fader might actually be better than touch-sensitive faders- in effect whether it detects pressure or touch will make little difference in actual use (you probably wont be able to tell the difference) and it might actually be more reliable that a touch fader. Well have to try it out and see

      • February 1, 2020
    • noiseuk
      noiseuk

      I'd love to see an in depth review of the Wing as a control surface.


      Certainly in my work I rely on resting a finger on top of a fader to overwrite automation as much as I do actually moving it. I'm not convinced motion sensitive faders which are what Behringer seem to suggest are on the Wing will be ok for that.


      A very long time ago I used to use a Yamaha 02R to mix TV shows - that had motion/pressure sensitive faders and was a real pain for fast turn around TV mixing (although we didn't realise that until we upgraded to Avid desks with touch faders). Maybe the Wing has some super new fader tech that will work seamlessly - I hope so because it seems to have everything else I need.


      If anyone has actually got the Wing and could comment on the fader automation it'd be much appreciated.


       


       

      • February 9, 2020
Go to page