Statistics

165,365 members
43 posts
  • ChrisF
    Contributor - Level 2
    2020-02-11

    Can I use backing tracks as 'steps" for a preset, so Song1 preset will have 2 backing tracks, Step1 will have the verse backing track, and Step2 will have the chorus backing track? Then I can just flip between verse and chorus backing tracks by using the Step switch?

    Is there a (better) different way to achive this?

    read more...
    0 67
  • nmalexandersen
    Newcomer - Level 1
    2020-05-27

    Hi ...

    I am searching the web for spesifications on the Audio outputs on a Perform VK, but I come up short ...

    So ...

    Is the outputs balanced or not ?

    At what level does the outputs operate ?

    I guess that the AUX IN is a -10 dB stereo jack .... correct ?

     

    Regards Nils

    read more...
    0 30
  • BeePee
    Contributor - Level 1
    2019-11-25

    I'm still happily using my original Voicelive Touch for gigs and home recording. I link it up via USB to an iPad to get the benefits of the excellent Loopy app, superior in many respects to the looper in the VLT. A question, if anyone's listening: Loopy gets the signal from the VLT fine and returns it without noticeable latency. However it seems only the main VLT signal is being recorded in Loopy via USB, not extras like harmonies etc. I can get them if I take an analogue signal from the main or headphone VLT outputs into the iPad via an iRig headphone input, but I want to retain the clean USB input. Any idea why only part of the signal (pre processing, without harmonies etc) is coming in via USB? Thanks, BeePee

    read more...
    0 55
  • sigma
    Triber
    2020-09-03

    testt

    0 14
  • ChrisF
    Contributor - Level 2
    2020-02-23

    I've read the looper section in the manual, and didn't find the answer.

    How can I trigger start of loop recording when I hit my first chord on my guitar for example? Is it possible?

    P.S. You can tell I just got the VL3X this w/e, and am learning the basics.

    read more...
    0 84
    • ChrisF
      PetGerbil

      Me again


      Press the "Looper" Button, In the "Loop Slot" tab,scroll to the bottom. There's an "Audio Cue" setting.That should do it. Also to the right is a "sensitivity" setting,which sets.....errrrr...how sensitive it is.


       


      It was added with a firmware update, so it's not in the Manual.


       

      • February 23, 2020
  • us_shooter
    Contributor - Level 1
    2020-03-21

    I recently picked up a Martin CEO7 which has no pickup.  I am considering adding a K&K Mini, but need to know if a pre-amp will be required. 
    thank you. 

    0 58
    • us_shooter
      TCH-Rob

      Hi @us_shooter ,


       I use a Seagull with a passive K&K mini pickup into a Play Acoustic, and it works fine. I find the K&K to be quite high output for a passive pickup, and I can add any additional gain in the Play Acoustic mixer or FoH can add it from the mixer. 

      • March 25, 2020
  • Barkus
    Contributor - Level 3
    2019-08-29

    Hello. My 3 switch works on the VE and the VL3X but my 6 switch only works on the VE not the VL3X. What gives? Thanks Barkus

    0 132
    • Barkus
      Barkus




      (view in My Videos)

      • August 31, 2019
  • wavesequence
    Contributor - Level 1
    2019-09-17

    I'm wondering if any updates after OS 1.21 are avaliable and where can be retrieved.

    Thanks in advance,

    ws

    1 267
    • wavesequence
      TCH-Spencer

      Hey @wavesequence,
      Yes indeed that is the latest and last firmware update for the VoiceWorks Plus.  Hope you're still getting some use out of that thing

      • October 1, 2019
    • wavesequence
      arlopete1

      I was also searching the internet for an update for my trusty old TC-Helicon Voiceworks Plus as my unit is still on Versions 1.01. I cannot find versions 1.2 or 1.21 and wondered if you could point me to a resource or possibly (out of the generosity of your heart) send the update to me. I have spent endless hours trying to find these updates and I just don't understand why the company does not have them posted somewhere.


      Please let me know. Thanks for your consideration.


      Pete

      • February 17, 2020
    • wavesequence
      Maroliboe

      +1
      I also need the latest firmware (I think it is 1.21) for my Voiceworks plus - where can I download it, please advice
      Thanks & greetings,
      Martin

      • March 18, 2020
  • Soundcatcher
    Contributor - Level 1
    2020-02-19

    So our Voicelive 3 Extreme has an intermittent fault.. Without warning the volume / Bass will drop out of a recorded loop. No settings are changed or cables moved. This happens with saved loops and also newly recorded loops. The live output on vocals and guitar remain at the correct volume and don't lose any of the bass. Recorded vocal loops also appear to be okay.

    I'm fairly good at fault finding and systematically working through issues, but this one currently has me stumped. I'd understand if it was an auto volume clipping compression thing but on a previously working loop it doesn't make much sense? Has anyone had a similar issues and have they fixed it? If anyone from TC Helicon spots this... Is this an issue that you may be able to fix?

    My daughter loves this piece of kit but if we can't make it stable (understand it may be our finger trouble somehow) we may be forced to find an alternative. She's a solo singer guitarist that's known locally for her looping talents.. So the pedal is a kind of essential piece of kit... Currently looking as though it may end up being a very expensive doorstop!

    read more...
    0 65
  • Crimso23
    Contributor - Level 2
    2020-01-20

    I cannot figure out how to print the preset list in Voice Support 2. There must be a way. It's very **bleep**bersome to scroll through the list every time I'm looking for a preset. I know I can add presets to my favorites to make scrolling easier, but I'd also like to explore other presets (without scrolling). 

    read more...
    0 80
Go to page