Statistics

165,420 members
161 posts
  • poneymagik
    Contributor - Level 1
    2020-02-04

    Hey, my RD-8 freezes at random times, when it happens i have to restart to unit, is there anyway to fix that or should i send my unit back ?

    Thanks

    2 105
    • poneymagik
      tomorohhidari

      Hi,


      same here. Got this last week. Updated to new firmware but it keeps happening.


      Any updates on this? Any chance this could be looked into and fixed in a firmware update?


      Ta!


       

      • May 6, 2020
    • poneymagik
      alonsorondon

      Same happens to me....
      it could be at any time, can we fix this? because it is imposible to work with this issue.

      • June 9, 2020
  • jkvalentine
    Contributor - Level 2
    2019-11-23

    Hello Behringer,

    I'd love to update my RD-8's firmware using Linux Mint 19.1, why do you only offer an updater for Windows and Mac? I'm a paying customer like everybody else, so please make it work with Linux. I tried to update via Wine, but that doesn't work. I can run the program but it doesn't find the RD-8 when it's in boot mode (it's all black then, that's right?). In the manual for the firmware update, updating the usb driver is suggested, but the one suggested clearly makes no sense for Linux. If I interprete the manual correctly, the RD-8 contains a STM-32 microcontroller that handles the firmware - so I guess it could work with Wine if  Linux runs a STM-32 driver (which one)?

    Please help, thanks in advance

    read more...
    0 190
    • jkvalentine
      jkvalentine

      Hello? Customer service, anyone?

      • November 27, 2019
    • jkvalentine
      jkvalentine

      Dear Behringer team,
      I'm waiting for support for Behringer products. Me and a lot of other people! Why does no one answer our support questions? We're paying customers - but no support for us means no money for Behringer in the future. It's that simple.
      Please treat us like people who are interested in your products and your success, because we are.
      Thank you

      • December 14, 2019
  • Bduck
    Contributor - Level 2
    2020-01-24

    Hello,

    I'm trying to use the rd-8 as master and send midi clock to an external synth sequencer.  It sends clock but also sends midi note data from the given pattern, triggering unwanted notes in the external synth. Is there away to shut off sending midi notes? I only want to send clock from the midi out

    read more...
    0 135
    • Bduck
      Bduck

      Found a solution by setting the rd-8 midi out to different channel than the synth's midi input. It appears midi clock is still transmitted globally from rd-8 out.  

      • January 25, 2020
  • s_a_p
    Contributor - Level 1
    2019-11-21

    Hi everyone. I got tired of waiting for the US vendors to get the RD-8 in stock, so I ordered one from musicstore.de. I got my RD-8 this week, and noticed there was no sound from the headphone outs or the main mono output. Figuring that a return to Germany would be annoying at best, I opened it up to see if I could spot any trouble. Sure enough, it looks like there was a hardware fix soldered on to the output board. The solder job was botched pretty badly, and looks like the beads of solder are touching. There is a transistor on the board that also looks like it was burnned. It was burned badly enough that I couldnt see the entire part number on the chip.

    So here is what Im hoping to accomplish. First of all Im not upset and dont feel like this is some sort of injustice. I understand that Behringer was trying to get these things built en masse and for a price point. So from that standpoint its all good. Other than the output board kludge it actually looks to be pretty solidly built and of good quality.  What I am hoping to get is a replacement output board for my RD 8 so that I can get that installed and get this thing working.

    While I would like to do it on a reasonable time scale, Its not exactly an emergency as I own a real TR-808. I am keen to get started with the wave designer and the newer sequencer features though, I would even be willing to just outright buy this output board and not even mess with a warranty. Seriously, I want to be cool about this and just want a working unit. I have otherwise been super happy with the behringer gear, and have a K2 and the 303 ordered.(also will buy the RD9 as soon as available). So MusicTribe, How can I get my RD-8 fixed? working?

    kludge1.jpg
    read more...
    0 145
  • HeikoKnuettel
    Regular Contributor - Level 1
    2019-10-02

    Why? 

    0 104
  • stephanchauvel
    Contributor - Level 1
    2019-10-06

    Hey there,

    unfortunatly it is impossible for me to update my rd-8 with the new firmware. Although I installed zadik's usb-driver, the updater could not place the update.

    So, what can I do now? I already installed new driver, I restarted computer, I followed the instructions in detail, but it failed several times.

    Hope you can help me, cheers, Stephan

    read more...
    2 567
    • stephanchauvel
      rvh

      Same here but with Mac.  Downloaded the file and unzipped but Im getting the following error message:


      “RD808 Firmware Updater 1.2.6” can’t be opened because it is from an unidentified developer.


      Any suggestions as to what to do would be greatly apprictaed!


       

      • November 9, 2019
    • stephanchauvel
      eagleman

      Hi !
      I am trying to upload the latest firmware 1.2.6 from 1.1.8 om my windows 10 computer.
      I have followed all the steps in the manual
      The program "Behringer RD-8 Firmware Updater 1.2.6 WINOS.exe" confirmes RD-8 detected - click Update to start...
      When i click the Update buttom there is a Update faild windows that says Cannot communicate with the RD-8. Please check if you have the correct driver installed
      What to do now?

      • November 15, 2019
    • stephanchauvel
      walkeracid

      Well...I got mine RD-8 to update with Zadig but now it would not been seen in either Reason 10.4 or Presonus Studio One 4.6 It lays the driver not under "Sound-, Video-, game-controller" but under a seperate menu called "USB-devices"

      • April 10, 2020
  • sigma
    Triber
    2020-09-08

    Test 

    0 56
  • FelipeGonzales
    Contributor - Level 3
    2019-09-14

    Hi,

    is there a full RD-8 manual in the works and when will it be available to download?
    Loving this machine so far, well done!

    -Felipe

    2 4,285
  • demian
    Contributor - Level 1
    2019-11-24

    Hi,

    2 Months ago i bought a RD8 and it was working out of the box. I could get audio from mono / headphones and individial outs. Since then i did not used the RD8 and put it in the box again for later use.

    Since a few days i am trying to get audio out of main / headphones but there is pure quietness.
    Individual outs are still working, but nothing from main and headphones.

    I updated to the latest version on the website, still no audio from main and headphones.

    Is my unit broke? What are my options?

    read more...
    0 565
    • demian
      JoeChandler

      This also happened to me and it turned out I was using the power adpater for the Behringer Model D for the RD-8 accidentally. Usually using the wrong power adapter would be obvious as there would be no power but in this case the RD-8 worked but the Main mon and headphone outs did not work.


      There was also a strange noise from the tom outputs.


      Is it possible you have an incorrect adapter too? Hopefully you are able to resolve your issue. Good Luck!

      • November 28, 2019
    • demian
      vibes71

      I have exact the same issue. Did you find a solution anyhow ? Can't find anything yet...

      • December 14, 2019
    • demian
      robstaf

      I also have the exact same problem! Updated firmware and restarted. Checked all levels. Is there some weird preference that I have to switch? The individual outs work.

      • March 1, 2020
    • demian
      anthonyg

      You're not the only one Same problem here.


      Anyone find a solution yet?

      I have 2 RD8s One with this problem and one working fine. I've done the same tests and settings on both including factory resets. 

      So with one working I have a "control group" So I know that there is a problem with the unit and not a user error. Or at least I think.

      • May 12, 2020
  • KB
    Contributor - Level 1
    2019-12-05

    Hello, I have bought and returned to vendor 'TWO' Behringer RD8's already, there is a fault that I just cannot get past.

    There are 5 pairs of sounds which you toggle between using a switch, I have noticed that the volume levels of some of these paired sounds aren't properly matched, especially the Rim /Claves. On both units I had, the Rim is way too loud and the Claves too low. Now on some of the demo videos we've been watching this issue does NOT exist on all RD8's, only some.

    If, as in some early house music, you enjoy toggling between paired sounds manually while a pattern is playing, you'll notice that the Claves sound needs to be DOUBLE the level that it is to be able to match the level of the Rim sound. Listen to a genuine Roland 808 or even a Boutique example to hear how these 2 instument's levels are balanced. Can Behringer help me with this and help me to get a unit that does not have this issue ? I am getting tired of buying and returning units as most are sold by mail order. And of course it's impractical to visit the few stores in the UK that have RD8's and check every unit for a goods one. BEHRINGER PLEASE HELP ! Thank You. KB

    read more...
    1 217
    • KB
      chewabledrapery

      I am also having the same problem, i've updated the firmware to the latest version and the problem persists.


      The rimshot voice is about 5 times louder than every other voice and i have to turn the level almost to zero to get the mix correct on the mono output.


      I've not tried it on individual output yet as i dont have a multichannel recording interface.


      Can someone please respond to this and advise me if i need to return the unit?


       


      Thanks

      • May 29, 2020
    • KB
      chewabledrapery

      I've done some more digging and found help in facebook forums.


      It appears this fault is known colloquially as "rimzilla" and is a fault with the early models, here's a forum post that sheds some light on the issue, you basically need a december 2019 or later revision by the looks of it.


      https://www.gearslutz.com/board/electronic-music-instruments-and-electronic-music-production/1214093-behringer-rd808-analog-drum-machine-284.html

      • May 29, 2020
Go to page