Statistics

165,420 members
161 posts
  • wasmith5
    Contributor - Level 1
    2019-11-19

    Hello,

    I am looking for a specification sheet of this device as well as the pricing and where to buy.

    Thank you

    0 145
    • wasmith5
      Paul_Vannatto


      @wasmith5 wrote:


      Hello,


      I am looking for a specification sheet of this device as well as the pricing and where to buy.





      That's a great reference mic. It is available at most online music or audio stores such as here. I did see the spec sheet online not too long ago. If I come across it again, I'll add the link.


       

      • November 19, 2019
  • RichardMBridge
    Contributor - Level 1
    2019-10-16

    This website is utterly impenetrable!    Anyway, I eventually found a way to this point,  

    My girlfriend’s son who is intelligent but differently abled has been given a Behringer B1 mic by his school.  Yes, a B1 not a B2.  They said it “just stopped working”.  I have tried it on one of my many PA amps with 48V phantom and it is true – absolutely nothing is coming from the mic.  Can you give me any clues or is there anywhere I can send it at least to get a price for a paid-for repair?  I have a usual repairman who was recommended to me by Yamaha who solves most things!   Is there an email address for Behringer so that I can ask them?  

    read more...
    0 121
  • herenow
    Contributor - Level 2
    2019-11-29

    Hi,

    A year ago I bought a BEHRINGER PMP500 POWERMIXER (which I use frequently) and 2 wireless microphones ULM200USB/ULM202USB, which I checked at that time and they where working. They have been stored since in a dry place and now they are not working any more.

    Any suggestions?

    I wanted to contact the support team, but the "My Profile" don´t like my phone number so I´m nor able to do that.

    Any suggestions?

    read more...
    0 227
    • herenow
      RexBeckett

      @herenow 


      Hi Martin, welcome to the community.


       


      Some of the fields in the profile are picky about the format of the entry. Try selecting your country code in the pull-down and then entering your phone number without spaces, dashes or a leading zero.

      • November 28, 2019
    • herenow
      herenow

      Hi Rex,


      somehow it worked - after I filled in "male" which I´ve not seen and not been aware of. Now I could send my inquiry. It says my ticket is resolved, but I don´t find an answer to my question. Instead I got a mail for a customer survey. Wouldn´t it be nice to answer my question first?


      By the way: It is far too complicated to get in contact with support.


      Thanx in advance for your help!


      Martin


       

      • November 28, 2019
    • herenow
      RexBeckett


      @herenow wrote:


      Hi Rex,


      somehow it worked - after I filled in "male" which I´ve not seen and not been aware of. Now I could send my inquiry. It says my ticket is resolved, but I don´t find an answer to my question. Instead I got a mail for a customer survey. Wouldn´t it be nice to answer my question first?


      By the way: It is far too complicated to get in contact with support.


      Thanx in advance for your help!


      Martin


       





      @herenow 


      Keep an eye on your email Spam folder. Some users have lost responses from the Care team here. What type of ticket did you raise? I suggest Technical Support would be the one to try. I have noticed that cases get marked as Closed after Care has sent an email with suggestions. The case then gets re-opened when you send a reply to the email.

      • November 28, 2019
    • herenow
      herenow

      I got this:


      "Hi herenow!


      You just earned a new badge!


      First Reply
      Reply to one post."


      and your message, that´s it


       


       


       


       


       


       

      • November 28, 2019
    • herenow
      RexBeckett


      @herenow wrote:


      I got this:


      "Hi herenow!


      You just earned a new badge!


      First Reply
      Reply to one post."


      and your message, that´s it


       


       


       


       


       


       





      @herenow 


      You will get this type of email from the Community web system - unless you disable them in your Settings. They are not related to the Care tickets. You should have received an email showing your case number and saying that they would respond later. If you didn't get this after, say, 24 hours, try raising another ticket.

      • November 28, 2019
  • Ivgi
    Contributor - Level 1
    2019-12-01

    Hi everybody.

    What can I do about sound delay? How can I sing karaoke this way ?? 

    Just recieved 2 mics and for several hours was trying to make it work with my new Dell laptop. No success . Windows 10 home. We've tried everything we found on the web to deal with the delay... waste of time... 

    Please help

    read more...
    0 271
    • Ivgi
      KenMitchell

      Hi @Ivgi ,


       


      Welcome to the community.  I've used those microphones with a Europort MPA100BT without any lag issue so the problem is likely on the laptop side.  The ULM receiver is class compliant so it should be recognized by the laptop as either a microphone or line input.   What software are you using for playback? 


       


      Ken

      • December 2, 2019
  • hoangbaokhoa
    Contributor - Level 2
    2020-02-10

    We have sold many to clients but now they want to return because the signal not stable and drop off during singing. Some clients using many (2 or 3 sets) at the same time on stages also informed us the same, they said the ULM302MICs signals were interfered and dropped. Would you please check and advise for solution? We still have many in stock.

    Many thanks in advance.

    read more...
    0 74
  • MyBones
    Contributor - Level 3
    2020-01-24

    Configuring the library "Local IO", I engaged the 48 V power to some channels. When changing to the "Card Playback" configuration, the 48 V power keeps engaged, but is not shown on the panel, shown at the rear plugs lights only

    I do not want to have the 48 V power to be engaged in the "Card Playback" setup, but it seems to be copied from the "Local IO" into this.

    read more...
    0 195
    • MyBones
      RexBeckett

      @MyBones 


      I'm assuming your question is about X32 or M32 consoles. The +48V Phantom switch is part of the preamp configuration. When you switch to playback mode, the channel inputs are switched to those defined in the Play routing but the preamps are still active and can be used for recording or sending to other consoles. You can change the phantom settings on the Setup -> Preamps screen/tab.


       


      If you want to have a special configuration for playback that disables the phantom power, you could use a scene or snippet instead of the Record/Play routing switch.

      • January 24, 2020
    • MyBones
      MyBones

       


        Thanks for the answer, and yes, the question was about the x32 Compact.


       Seems to be necessary to disable +48V power everytime I change to CardPlayback, if it was activated in Local I/O. Deactivating and saving in CardPlayback has no effect, the Record/Play routing switch has no effect on +48V power either.   Question depending on that: Why is the activated +48V-Power from Setup/Preamps not shown in the config/preamp panel too?
      • January 25, 2020
    • MyBones
      RexBeckett


      @MyBones wrote:




       


        Thanks for the answer, and yes, the question was about the x32 Compact.


       Seems to be necessary to disable +48V power everytime I change to CardPlayback, if it was activated in Local I/O. Deactivating and saving in CardPlayback has no effect, the Record/Play routing switch has no effect on +48V power either.   Question depending on that: Why is the activated +48V-Power from Setup/Preamps not shown in the config/preamp panel too?




      @MyBones 


      The Record/Play routing switch only changes the routing. It has no effect on other console settings. The phantom power status is always available on Setup -> Preamps but is only shown on a channel's Config screen when the channel is connected to a preamp - so this is affected by the current routing.


       


      Why is it important for you to switch off phantom power during playback? Normally it is better to leave microphones powered so there is no pop when switching back to recording.

      • January 25, 2020
    • MyBones
      MyBones

       


       


        Surely I can get around this by paying attention...  


      ...but assume I have a stagebox with microphones using +48 and then I decide to change to dynamic microphones. Neither the stagebox nor the panel shows the activated +48 in the Card setup. I have to look at the rear of the x32 or into the setup/preamps. It is just a little bit tricky for amateurs. 
      • January 25, 2020
  • Nyleneves
    Contributor - Level 1
    2019-12-11

    my cordless  behringer microphone is connected to my behringer QX1204USB mixer.  The light on the microphone and the USB device connected to the mixer is blinking orange 4-5 seconds than turns off.  How do I get the light to stay on and work so sound comes out of my speakers.  I get sound coming out of my speakers when I use my wire microphones but not with my cordless microphones.

    read more...
    0 187
    • Nyleneves
      KenMitchell

      Hi Nyle ( @Nyleneves ), 


       


      Welcome to the community.  Try putting fresh batteries in the microphone and also try re-pairing the microphone to the receiver.  I"m not sure what makes them become unpaired but I've had this happen in the past. 


       


      Hope this helps, 


      Ken

      • December 11, 2019
  • TommBuzzetta
    Contributor - Level 2
    2019-11-06

    Considering the purchase of a "does it all" project-studio mic? Read my review of Behringer's B-1 Condenser Microphone here:

    https://creativetechnerds.jimdo.com/behringer-b-1/

    read more...
    0 303
    • TommBuzzetta
      TC-Mike

      Thx for the review,


      at this pricepoint it is a real bargain and like the original it models it is very versatile.


      Love the that it has different polar patterns too, so 2 of them in figure 8 mode/Blumlein pair  could be a great for overheads. 


       


       


       

      • November 6, 2019
  • Roseanne
    Contributor - Level 1
    2020-03-02

    Hace poco compré unos micrófonos behringer ultra302mic y me encantan pero uno de ellos comenzó a tener problemas de conección con su caja, prende una luz roja y como que se va la señal cuando estoy cantando.

    0 105
    • Roseanne
      RexBeckett

      @Roseanne 


      Hola Roseanne, bienvenidos a la comunidad.


       


      Le sugiero que presente un ticket de Atención para la Reparación del Servicio explicando su problema. Esto se hace haciendo clic en Soporte en la parte superior de la página y luego haciendo clic en el botón Crear un ticket de atención. Esto es solo es posible si ha completado todos los campos obligatorios en su perfil. Asegúrese de completar todos los campos obligatorios en el formulario de Atención.

      • March 2, 2020
    • Roseanne
      Roseanne

      Gracias. Lo intento pero me pide el número de serie y no sé cuál de los numeros que tiene la caja es.

      • March 2, 2020
  • Denizak
    Contributor - Level 1
    2020-01-20

    Hi Everybody,

    I have recently purhased QX1832USB mixer with USB input for 1&2 mic input that enables to use USB wireless behringer microphones. I have purhased ULM300USB and it is working very well. My question is If I purhased one more ULM300USB microphone does it work with the same USB dongle of the previous mic. Because there is only one usb input for mic usb dongle. 

    Thank you for your support. 

    read more...
    0 196
    • Denizak
      RexBeckett

      @Denizak 


      Hi Deniz, welcome to the community.


       


      I don't think you can use two microphones with the ULM300USB. The ULM202USB has two mics with a single USB receiver.

      • January 19, 2020
    • Denizak
      Denizak

      Thank you @RexBeckett ,


      In the product specs of ULM300USB it's mentioned that the dongle has dual mode. 


      "Package of ULM300M handheld microphone and ULM300D dual-mode USB receiver"

      • January 19, 2020
Go to page