Statistics

165,418 members
153 posts
  • JeffVance
    Contributor - Level 2
    2020-03-14

    Anyone else have a similar experience? One of my ip2000s started making some extremely audible cracking sounds in the high and mid-high sections. Removing all inputs, turning down the master volume and input gains had no effect.

    I applied a sharp percussive maintenance to the back panel and the behavior stopped and did not return for the rest of the night. Physical inspection of the amp section did not show anything out of sort, but I did reseat the input to power amp ribbon cable for good measure. 

    I'll update here if it happens again.

     

    Thanks!

    Jeff

    read more...
    0 103
    • JeffVance
      GaryHiggins

      @JeffVance 


      Hello, I like your method


       


      "I applied a sharp percussive maintenance to the back panel"


       


      Sometimes my preferred tool over all is the hammer!


       

      • March 14, 2020
  • bossofsound
    Contributor - Level 1
    2020-02-26
    How to become an authorized agent of the company turbosound in Egypt? What are the conditions for establishing an accredited maintenance center in Egypt?
    0 35
  • JayAlper
    Contributor - Level 3
    2020-04-14

    I recently bought a Turbosound iQ12 speaker and noticed the firmware loaded on it is version 2.1. I see that there is now a version 2.2 firmware for that speaker. The release notes for version 2.2 list some improvements, but the previous version shown in the notes is version 1.9, not 2.1 (in fact, no mention of version 2.1 at all). So, I'm assuming the version 2.2 changes show what is different between v.2.2 and v1.9. 

    So, I'm wondering what the specific differences are between iQ firmware 2.2 and 2.1?

    Thanks in advance for any info!

    Jay

    read more...
    0 93
    • JayAlper
      GaryHiggins

      @JayAlper 


      Far from certain here but I suspect very little different. I would bet you have a prerelease version of 2.2 and it could in fact be the same, differing only by name. I have seen listings in other product firmware versions where a version is listed but was not offered as a public update. On my end here I see no 1.9 or 2.1. Only 1.7 and 2.2. Just guessing of course, 

      • April 14, 2020
    • JayAlper
      GaryHiggins

      @JayAlper 


      Funny, I ran across this while looking for something else!






      iQ-Series Firmware Update Version 2.2 - (22 January 2019)




      Turbosound iQ-Series


      Firmware update for Turbosound iQ-Series amplified speakers.


      We recommend downloading and installing the most recent firmware from turbosound.com to ensure optimal performance of your product.


      Your speaker models can either contain Version 1 or Version 2 firmware, which was introduced as a running change in 2018. There is no functionality or performance differences in hardware A and B and this change was due to silicon obsolescence only. Please note this does mean the software in the display/menu will show as FW: V2.2. Both Models HW:A & HW:B are fully supported from a warranty perspective.


      To install the firmware update on Turbosound DSP modules:



      1. press SETUP while switching the unit on


      2. Connect your Windows PC to the speaker’s USB port


      3. Then run the executable “TURBOSOUND UsbUpdate_V2.2.exe” that you downloaded and unpacked from our website.



      2.2 (2019-01-22)


      New features:



      • Improved input modes: Analog, Ultranet and Auto.


      • Separate P16 page for Ultranet setup.


      • Active Ultranet channel is shown on main screen.


      • Improved parameter save and several fixes.


      • Improved limiter behavior.







      musictribe.com page 1 of 2 turbosound.com







      1.9 (2016-07-01)




      New features:



      • Improved ULTRANET stability


      • Improved behaviour in low temperature operation (below 0 °C)


      • Support for upcoming TS products (new series)


      •  

      •  

      •  

        1.7 (2014-06-10)

        New features:




      • support for NuQ, TCS and TSP series


      • support for Turbosound Edit remote application 1.0 (2014-12-04)



      iQ series production release






      © Music Tribe Global Brands Ltd. All rights reserved.
      All information in this document is subject to change without any further notice.






      musictribe.com page 2 of 2 turbosound.com





       


       

      • April 14, 2020
    • JayAlper
      JayAlper

      Gary,


      Thanks for the info. I suspect you're right that v2.1 and v2.2 are essentially the same. Maybe, v2.1 is the version they ship loaded on the hardware and v2.2 is the version they offer as the final downloadable release on the website. In fact I seem to recall there was (is?) something similar in the (sister company) Behringer X32 firmware releases, where firmware ending in an odd number was basically the development/beta tester version and firmware ending in an even number is what was released to the general public.


      Anyway, I'm hoping there isn't much (if any) difference between the iQ v2.1 and v2.2 frimware.


      BTW, if/when Turbosound do release a new version of the iQ firmware, is it true that you can not perform a Turbosound iQ firmware update on a Mac? That would be REALLY disapointing! I would hate to think I've got to buy a Windows PC (or, buy a Windows license and repartition the drive on my MacBook Pro) just to update the iQ firmware.


      Jay

      • April 16, 2020
  • Jesus1
    Contributor - Level 1
    2020-04-16

    Hola estoy a punto de comprar de segunda mano dos eurolive b1500d pro, por 500€. Veo que este modelo no está en catálogo, cuál es el que lo sustituye, porque el vq1500d parece más pequeño en potencia y el b1500xp es de más potencia.

    Me recomendáis la compra o mejor unos nuevos? Gracias 

    read more...
    0 34
  • Klaudia114
    Contributor - Level 1
    2020-05-01

    Hi,

    I have had my 2 EuroLive B115D speakers for a few years. i love them. just the other day i went to turn one on and the top speaker part (called 1.35" compression transducer in the manual/brochure) is not producing any sound only the bottom half of the speaker. it sounds like as if there if a cloth muffling the top speaker part. Does any one know if i can fix this at home somehow or not where i could buy a part to fix it? Thanks.

    read more...
    0 44
  • JimDillon
    Contributor - Level 1
    2019-12-24

    What is the differance in Ip2000 ver 1 and ver 2?
    If it's software is there an upgrade for the software?

    0 195
    • JimDillon
      GaryHiggins

      @JimDillon I have been trying to sort this myself for a while now as I own an ip2000 v1 system. What I have come to find out, the v2 system can get firmware updates and the v1 can not. I hoped it would be easily upgradable by simply installing the firmware. It is not. The firmware update is done via the Turbosound app which is the same version for both v1 and v2. The app can detect if you have the V1 or V2 system and if it's V2, it allows the firmware upgrade-I believe there have been 2 so far.

      • December 24, 2019
  • Paulo1
    Triber
    2019-10-03

     

    Introducing Tannoy Gold Monitors

    Many of the world's greatest hits have been recorded and mixed using Tannoys. 

    The long and storied legacy of Tannoy's studio monitors have endured the test of time and adapted with the evolution of technology.

    Dual Concentric: The heart of Gold
    Today Tannoy is introducing the Tannoy Gold series, the next generation of premium nearfield monitors.

    Engineered to the highest standards and build quality, the Gold series are designed to provide the most powerful, accurate and uncolored representation of your music.

    Whether you're a seasoned Tannoy user or just taking your first step into a monitor system based on the legendary Dual Concentric driver, the Golds are your new best sonic friend and most trusted reference for any project.

     

    Key features
    • Precise and neutral soundstage
    • Dual Concentric driver technology
    • Front-firing bass port
    • Titanium tweeter with Tulip waveguide
    • Class-AB system
    • Transducer-matched LF and HF bi-amplification
    • Dedicated input trim, bass and treble controls
    • Selectable automatic standby mode

     

    Tannoy - The Voice Of The Artist

    To find out more about Tannoy please visit: www.tannoy.comunnamed.png

     

    read more...
    3 320
  • SeanThody
    Contributor - Level 1
    2019-12-19

    Need an amp pcb board for Tannoy TS2.12 was referred to music tribe for help.

    0 117
    • SeanThody
      KenMitchell

      Hi Sean ( @SeanThody ), 


       


      Welcome to the community.  The only way I know to reqeust parts is through the CARE portal that can be found here: https://www.tannoy.com/brand/tannoy/support#googtrans(en|en)


       


      There's been a lot of issues with the websites lately so it may take you a few tries to open a ticket.  Once you get the ticket submitted you should get an email auto-reply.  If you don't you might want to check your spam folder.  The email will say that you will get a reply within one business day but, be patient, since that's more like a week or more these days. 


       


      Hope this helps, 


      Ken

      • December 19, 2019
  • RobSarahs
    Contributor - Level 1
    2019-10-20

    Hi there, I need a replacement of one of these but cant find it anywhere, can anyone help?Hi there, I need a replacement of one of these but cant find it anywhere, can anyone help?

    read more...
    0 141
  • buskerer
    Contributor - Level 3
    2020-03-22

    Hello everyone,

    Would the signal output from a channel's balanced input using a TRS jack on that input be true stereo? I've been running the stereo left/right outputs from my guitar effects unit through the PPA200's stereo channel which has left/right inputs and it sounds beautiful. The thing is I'd like to use that channel for something else, hence my question.

    Thank you for your time.

    read more...
    0 78
    • buskerer
      Paul_Vannatto


      @buskerer wrote:


      Would the signal output from a channel's balanced input using a TRS jack on that input be true stereo? 





      No, balanced TRS input is not a stereo input. It uses the same 1/4" jack. But the pinouts are different. A balanced TRS has pin 1 = shield, pin 2 = hot+, pin 3 = hot- (180 degrees out of phase).


       

      • March 22, 2020
Go to page