Statistics

165,386 members
92 posts
  • JacquesMathez
    Contributor - Level 3
    2020-04-11

    Hi,

    When searching "Turbosound edit PC" in the download section of Turbosound, i only find V1.1

    When I downloaded and installed it, one or two years ago, it was V1.3.

    Also, a google search with "Turbosound edit PC V1.3" returns with "no results".

    Strange, no? 

    read more...
    0 76
  • jalexander510
    Contributor - Level 1
    2020-05-08

        I recently purchsed used 800a monitors (with matching sub) and they had some of the best imaging ever heard, but they did not last long. The Right speaker was dead in the water, when I opened it up, the LM317/LM337 transisters looked fried, so I replaced them. In the process the board started to delaminate in around the holes. I just used jumber wires to what I thought were obvious places, but now I have sound but its only static. 

         I would like to replace the amp with original on the one monitor or use a similar active amp to replace both speakers. I assume I would just have to match the crossover network before it splits to the amps. I really want to use these monitors again because I just got them last month. Can some please guide me a bit?

    read more...
    0 45
  • richg45
    Contributor - Level 1
    2020-01-12

    Can you use a different mixer with the Inspire 1000? I need more channels

    0 103
    • richg45
      DaveMorrison

      @richg45 


      Yes. That's the way most people would use it. 

      • January 12, 2020
    • richg45
      Diepsloot

      I'm a Mobile Dj and use this behringer mixer to give me a few more channels, for say more mics or instruments, or emergency inputs like a phone or another bluetooth receiver. The mixer allows me to have an output channel for a monitor in which I control the volume right on the mixer. It also allows me more headroom, more volume control than just a computer and a controller by itself.  
      BehringerX1204 USB - 12 Input 2/2 Bus Mixer with EFX and USB
      fcdd8d45545f5b79e3667b5d23c73da6.image.500x500

      • January 18, 2020
  • BronxBluesman
    Contributor - Level 2
    2019-11-15

    I just purchased 2 IP300 and 2 IP12B sub's

    I am looking for covers for them and do not see any on the Turbosound web site.

    Love these speakers and want to protect them

    0 256
    • BronxBluesman
      KenMitchell

      Hi Barry ( @BronxBluesman ), 


       


      Welcome to the community.  I'd recommend you check out Tuki Covers.  They have one specifically for the ip300 but I didn't see one for the ip12b.  They do have one for the ip15b so I'm sure they'd be happy to make custom one for you for what I've found to be a very reasonable price.  I've found their quality to be top notch. 


       


      http://www.tukicovers.com/amp-and-speaker-covers-bags/turbosound/turbosound-inspire-ip300-powered-column-loadspeaker-padded-cover/


       


      Hope this helps, 


      Ken


       

      • November 16, 2019
    • BronxBluesman
      BronxBluesman

      Thanks man:


      I have another question.


      What is the best way to cable from my IP300 to my IP12B

      • December 15, 2019
    • BronxBluesman
      KenMitchell

      @BronxBluesman 


       


      Hi Barry, 


       


      It depends on what mixer you are using and if you want the mixer to control the low end or use the crossover in the sub.  I'd probably start with a pair of XLR cables from the mixer L/R into Input A/B of the IP12B and then I'd take a pair of XLR cables from Link A/B on the IP12B into Input A on each of the IP300s. 


       


      IP12B-IP300.png


       


      Hope this helps, 


      Ken


       


       

      • December 15, 2019
    • BronxBluesman
      BronxBluesman

      I am using an Allen and Heath Zed 10 FX


      Right now i am going from the board to the IP12B and then to the IP12B


      Are you suggesting i go to the sub first?


      By the way thank you for taking the time, i so not no much out this and am learning

      • December 15, 2019
    • BronxBluesman
      KenMitchell

      @BronxBluesman 


       


      Hi Barry, 


       


      I usually go to the sub first to keep as much cabling as I can on the floor and to reduce the number of cables I have to run to the PA speakers.  Rather than running 2x XLR cables + power up to the speakers I only have to run 1x XLR cable + power if I come off the sub.  Electrically it's the same either way. 


       


      Ken

      • December 15, 2019
  • BigFire
    Contributor - Level 1
    2019-09-25

    I recently purchased a brand new full TLX84 rig and for the life of me cannot find crossover points at all for the HF and LF in this box. Can someone give me the HF and LF ranges? I can only find the range for the entire box.

    Also, when I was researching the Turbosound website said I would be provided with EASE files with these. I got nothing and can't find anywhere to download these. Help! I just invested a lot of money and would like to have these basic things. Thanks!

    read more...
    0 142
    • BigFire
      MatteoBarbaro

      Hi,
      Turbosound doesn't release DSP settings for TLX array's series, you must use dedicated amps, Lab gruppen PLM+ with Lake DSP on board. Eq settings, limiters, crossover and eq overlay are in the DSP presets downloadable from the product page.


       


      BR

      • October 16, 2019
  • Kferg
    Contributor - Level 2
    2019-06-03

    I'm new to live sound. Can someone help me on how to set up these speakers without blowing them. Any help will be appreciated 

    0 223
    • Kferg
      RexBeckett

      @Kferg 


      Hi Kevin, welcome to the community.


       


      We may be able to help if you tell us about the rest of your sound system and how you want to use it. Are you feeding the B15Xs from a mixer? 


       


      The DSP in the B15X includes LF and HF limiters to protect the drivers from overload. This doesn't mean that it isn't necessary to adjust signal levels in the sound system but it makes it less likely that excessive levels would cause damage.


       


      One important point is that the B15Xs (and any other active speakers or amplifiers) should be powered-on last - after every other part of the system is on and stable.  They should also be powered-off first when shutting down.

      • June 3, 2019
    • Kferg
      Kferg

      I'm using a yamaha 12 channel mixer and sometimes I use bluetooth to run my music through them. On the speaker there is a bar graph type thing that shows input. Just not sure where it should be exactly. And the speakers came with know information at all. 

      • June 3, 2019
    • Kferg
      RexBeckett


      @Kferg wrote:


      I'm using a yamaha 12 channel mixer and sometimes I use bluetooth to run my music through them. On the speaker there is a bar graph type thing that shows input. Just not sure where it should be exactly. And the speakers came with know information at all. 





      @Kferg 


      You can download the user guide here. It gives some instructions for setting the built-in mixer's input and output levels. The most important level display is the output (right) one - it should not reach the top (clipping).

      • June 3, 2019
  • robykock
    Contributor - Level 2
    2019-05-23

    Hi I am helping a customer but not sure the proper mounts to use for the IP300 to hang them or suspend them from wall.  What is best practice for doing this?

    Robert

    [email protected]

    0 102
  • Dae_dalus82
    Contributor - Level 1
    2019-06-10

    I own 2 15 inch siena tsp152-ans.  I was going to buy a pair of 12 in loudspeakers but before i do i was wondering the differences between the siena, nuQ, and athens product lines.  The athens have different dispersion options but other than that i am unsure what their main selling points are.  If i go by frequency response and max spl then the sienas are the best bet.  The other two lines are more expensive and i wonder why that is?  Thanks for any help anyone can provide.

    read more...
    0 188
    • Dae_dalus82
      GaryHiggins

      @Dae_dalus82 I cant speak to all the exact differences but when I looked (at turbosound in general) a while back, some models that had the ultranet port, did not include an ethercon port with it. I know the enclosre on some models differed in materials used and would suspect the speakers and perhaps the on board amps are different in some key ways.

      • June 16, 2019
  • luchien
    Contributor - Level 1
    2020-02-24
    0 120
    • luchien
      Paul_Vannatto

      Hi @luchien ,


      Welcome to the forum. There is no polarity setting in the DSP (or on the back panel) - I checked. You will need to do that in the console output.


       

      • February 24, 2020
    • luchien
      JeffRusin

      Well I know Paul is one of the smartest guys I know on this forum but on the dsp crossover button  I believe you can change the polarity 180 for a cardioid use but I'm sure I'm wrong lol

      • February 24, 2020
Go to page