Statistics

165,442 members
197 posts
  • DougSchneider
    Contributor - Level 2
    2020-04-04

    First of all, wow is the Toneprint Editor amazing. I spent an hour tweeking settings for my HOF2 today. I got some cool sounds, but felt like I was flying blind a bit. That. Thing. Is. Deep. Any chance you guys could do a video (series) diving under the hood and explaining some of those parameters?! Thanks!

    read more...
    0 55
  • alex_95
    Contributor - Level 1
    2020-04-08

    Hey there

    i got my Go XLR Mini today and ran into an issue setting it up: So far I had my PC Speakers (5.1, logitech) plugged into the three ports of my sound card and had quite satisfying surround sound. Plugging only one of the cables into the Go XLR's headphone jacks logically results in just the front two speakers working, which really isn't the desired outcome. Is there a way in a one PC Setup for the Go XLR to stay in control of all the audio (and the XLR microphone) while the ports of the soundcard emit the sound that powers my 5.1 speakers? The least favorable working option for me would be to lose the surround sound and have all 5 speakers on stereo.   

    Many thanks in advance,

    Alex

    read more...
    0 66
  • StefanEff
    Contributor - Level 1
    2020-05-10

    Hi,

    can I use this power supply to run the Hall if Fame Reverb Pedal (1)?

    https://m.thomann.de/de/thomann_nt_0910.htm

    Thanks in advance!

    read more...
    0 80
  • kmchez
    Contributor - Level 1
    2020-05-12

    I have  blown crossover.  I thought I blew the horn, but after replacing it, the scratchy sound cutting in and out is still there.  Can someone direct me where I can replace this part?  I can seem to find options for it.

     

    read more...
    0 51
  • sigma
    Triber
    2020-07-16

    test m4a test m4a test m4a test m4a test m4a 


    View Attachment
    0 61
  • sigma
    Triber
    2020-09-03

    testt

    0 18
  • Surhohi
    Contributor - Level 1
    2019-09-04

    I’m new to Xair for theater use with wireless headset mics on the cast . 2 Questions:
    1. Is there “shows” in the PC version? I can't find it.
    2. How do you set up your scenes or snapshots so each night of the performance you can tweak levels, eq, etc for the particular wireless mic placements for that night, but have those settings carry to all the scenes. I guess I want to limit what is saved to mute settings, but use nightly settings for levels, eq, etc. XR-16 is my unit.

    read more...
    1 116
    • Surhohi
      Paul_Vannatto

      Hi Smitty @Surhohi 


      Welcome to the forum.




      @Surhohi wrote:


      1. Is there “shows” in the PC version? I can't find it.


      The X-Air does not have shows, like the X32 does. The iPad app has a show feature which in reality is just a folder.



      2. How do you set up your scenes or snapshots so each night of the performance you can tweak levels, eq, etc for the particular wireless mic placements for that night, but have those settings carry to all the scenes. I guess I want to limit what is saved to mute settings, but use nightly settings for levels, eq, etc. XR-16 is my unit.


      What you are needing are snippets. Unfortunately that is only available with the X32. There are workarounds, though.


      1. You can load a "modified" scene file that has only the OSC commands (eg mutes) included (all other commands removed). Scene Parser can help you create these modified scene files.


      2. You can use 3rd party apps, such as Live Toolbox with its tidbits (snippets on steroids). 





       

      • September 3, 2019
  • RalfLeRenne
    Contributor - Level 1
    2019-10-19

    Hello,

    I bought a "Harmony Singer 1" a few years ago, and would like to switch to the second version. I'm in the process of making all my equipment for concerts "battery powered", and I saw this Harmony Singer 2 is able to do just that.

    But I still need to know if it can work with rechargeable batteries, since they usually tend to have less voltage. I would also like to know for how long the pedal can run on batteries. How many hours would it be ? 

    Thank you very much, 

    Have a great day,

    Thibault

     

    read more...
    0 126
    • RalfLeRenne
      TCH-Spencer

      Hey @RalfLeRenne,
      I'll be honest with you, battery life ain't great.  I tested a Harmony Singer 2 with fresh AA's (non-rechargeable) and it lasted three and a half hours before dying.  I don't think batteries were intended to be the primary power source for these stomps, more like a backup.  When a 9V adapter is plugged in, the pedal will use that wall power and ignore the batteries, which then kick in if wall power is removed.  Anyways, I think Harmony Singer 2 has the worst battery life out of the bunch because it has the busiest algorithm, but yeah you might want to have a backup set of rechargeables.  Cheers!

      • October 23, 2019
  • conradk
    Contributor - Level 1
    2019-10-31

    Hi All 

    I am new to midi and have just bought a TC M350 rack unit. I have also bought a Harley Benton MP100 Midi commander (aka Melo Audio midi commander) 

    I have sent a midi cable from the MP100 to my synergy SYN 2 preamp and i then have a midi through cable going to the "midi in" on the MP350 

    I have manageed to program the MP100 (using PC chnages) - so that it is changing all channells of my preamp AND also changing (presets) on the M350 BUT i am experiencing a VERY noticeable dealy on changes. If i remove the M350 from the signal change - the changes (straight to the preamp) are seamless, (with zero gaps betwen changes) - so it is definately , somehting to do with the M350. 

    I HAVE NOTICED that each time i change channells on the preamp the "tap tempo" button on the M350 flashes, so i am assuming the gap between changes , is due to the M350 receiving a message to engage tap tempo. The tap temp has its own cc number but i am not using CC comands, just PC change commands!.

    I have told the M350 to use "Omni" and i have the syn 2 preamp set to "omni" as well 

    This is driving me nuts! Anyone know what i am missing here? 

       

     

    read more...
    0 57
  • RationalGuy
    Contributor - Level 1
    2020-01-11

    How do you turn off / disable / bypass the crossfader?

    If a channel is assigned to the A side and another channel is assigned to the B side, are the other channels blocked or passed through to the output section?

    What if only one side of the crossfader is assigned to a channel?

    What if the same channel is assigned to both sides?

    Where are these cases and behaviors specified?

    (User Manuals for all other Behringer mixers with crossfaders, also, do not specify these cases.)

    read more...
    0 81
Go to page