Statistics

165,429 members
179 posts
  • Neha
    Newcomer - Level 2
    2020-09-02

    Testing purpose test edit

    0 14
  • DouglasLohman
    Contributor - Level 2
    2019-08-29

    Is there any way to limit the access of a particular tablet to parts of the x32 mixer. I would like only allow the tablet access to the main faders and indivual channel EQ. It's used in a church for mostly speaking with no aux sends or monitors. I've looked all over for this kind of thread, to no avail. Or, can someone point me to the thread if this has been asked/answered previously.

    read more...
    0 174
    • DouglasLohman
      RexBeckett

      @DouglasLohman 


      Hi Douglas, the only way I can think of to do this is to run Mixing Station XM32 Pro on the tablet and create a custom layout with only the allowed controls. It would be hard to make it foolproof but it would guard against accidental changes to other parameters.

      • August 29, 2019
    • DouglasLohman
      sgagnon

      If you had a budget you could use a control processor and touch panel, such as an Extron or Crestron based system, to design your own and control certain aspects of the mixer. I'm not sure how broad the x32's API is but its certainly a possible option.

      • September 24, 2019
  • McLoud
    Contributor - Level 2
    2019-11-16

    Got my Crave a few hours ago and i´m experiencing ghost trigs on rest steps.

    Means even if you do a pattern with only rest steps, you get tiny trigs which trigger the envelope. 

    Makes the sequencer useless for programming the simplest patterns. 

     

    On top the Mix (Noise / External Audio) is bleeding into the signal path. Both, external audio an noise will be in the signal path slightly, even when turned of. 

     

    I´m on 1.0.6 and somehow i think this could be solved though firmware ... 

     

    I´ve done a ticket to get a proper answer for this trig issue. 

     

     

    read more...
    0 321
    • McLoud
      Edi4

      I'm in the exact same situation!


      Ghost triggers under 1.06 on the rest steps. I have two Craves, both have the same issue.


      Please help!

      • November 16, 2019
    • McLoud
      microbug

      Hi there,


      I reported that as bug already, although I returned my Crave yesterday.


       


      You should do that too, since lowering decay time decreases the effect as Eduard said in the facebook group.

      • November 18, 2019
    • McLoud
      McLoud

      ......


       


       

      • November 19, 2019
  • wasmith5
    Contributor - Level 1
    2019-11-19

    Hello,

    I am looking for a specification sheet of this device as well as the pricing and where to buy.

    Thank you

    0 145
    • wasmith5
      Paul_Vannatto


      @wasmith5 wrote:


      Hello,


      I am looking for a specification sheet of this device as well as the pricing and where to buy.





      That's a great reference mic. It is available at most online music or audio stores such as here. I did see the spec sheet online not too long ago. If I come across it again, I'll add the link.


       

      • November 19, 2019
  • Djstuff
    Contributor - Level 1
    2020-03-16

    Okay so someone school me to when I can get CAT ?

    0 110
  • Kwarrington
    Contributor - Level 1
    2020-05-01

    Hi, I have an X32 rack.. the other day channels 1-8 have stopped working, on all 8 channels it is registering a small signal/interference but no input signal. Channels 9-16 appear fine... I have googled this and it seems it’s happened to a fair few... any ideas? Also, how do I contact Behringer direct? Thank you

    read more...
    0 72
    • Kwarrington
      RexBeckett

      @Kwarrington 


      Hello Karl, welcome to the community.


       


      I suggest that you raise a Care ticket for Service Repair explaining your problem. This is done by clicking on Support at the top of the page and then clicking the Create a Care Ticket button. This is only possible if you have completed all the required fields in your profile. Make sure that you fill-in every required field on the Care form.

      • May 1, 2020
  • ducky
    Contributor - Level 2
    2019-07-17

    Purchased a UMC404HD back in May to connect my hardware synths to my computer. I like to make videos to share with my children. 

    The unit installs and works beautifully with my Windows 10 installation. The issue I am having has to do with routing the multiple inputs. I can connect two hardware synths (both stereo) to the 1/2 and 3/4 inputs and engage the stereo switch to appreciate the full effect. 

    Inside of windows, the system recognizes the two sets of inputs/outputs as you can see from this screenshot:

    404-a.JPG

    The issue comes when I attempt to record video. I have only the two options to select and can not select both which means one of the two connected synths will not be recorded. 

    Is there anyway to create a "master" output that would use the audio from both 1-2 and 3-4 at the same time?

    Hoping there is a way to do this. 

    Cheers!

    read more...
    0 251
    • ducky
      KenMitchell

      Hi Wayne ( @ducky ),


       


      Welcome to the community. In order to record multiple inputs at the same time you need software that supports the ASIO driver. What are you using to record the video?  


       


      Ken


       


       


       

      • July 17, 2019
    • ducky
      ducky

      Thanks for the quick reply!


      I am currently using the camera app built into Windows 10. I also have Corel MultiCam Capture. Neither of them actually specify if they support the ASIO driver or not.


      Any suggestions would be appreciated.


      Cheers!

      • July 17, 2019
    • ducky
      KenMitchell

      Hi Wayne ( @ducky ), 


       


      I don't do much videography but the last project I worked on we shot the video and recorded the audio on two separate computers and merged them using Adobe Premiere Pro.  Adobe was a sponsor of the project but I'm not sure you can justify $300 for what you are trying to do. I've seen some discussions on the Reaper forums about folks doing it in Reaper as well but, again, I don't have much experience with it. 


       


      I think @Paul_Vannatto  has done some audio/video projects in the past so he may be able to suggest something. 


       


      Ken


       

      • July 18, 2019
    • ducky
      Paul_Vannatto


      @KenMitchell wrote:


      I think @Paul_Vannatto  has done some audio/video projects in the past so he may be able to suggest something. 





      I did it the same way you did Ken. 


      Hi @ducky


      Unfortunately the Windows OS does not support ASIO (never did, probably never will). That means that any Windows (or Microsoft for that matter) will only support what the Windows drivers will provide (which are currently stereo pairs only which you have to choose from). Reaper (and many other DAW) on the other hand fully supports ASIO.


       

      • July 18, 2019
    • ducky
      KenMitchell

      Yep. 


       


      Go Video... Go Audio... Go Clapboard... Action!


       


      https://en.wikipedia.org/wiki/Clapperboard


       


       

      • July 18, 2019
  • LarzHanson
    Contributor - Level 2
    2019-11-07

    This has probably been covered already, but I found out last night that the X Air app crashes now under iOS 13. I didn't realize it because I'm using Mixing Station Pro instead on my XR18, and it's stable, but a friend owns an XR18 too and suddenly had issues with his X Air app. I tried it on my iPad Pro and got similar crash results. Hopefully it can be resolved soon so all those using the X Air app (which is a good app) can continue without having to jump ship to Mixing Station Pro.

    read more...
    2 131
  • GeoffL
    Contributor - Level 1
    2020-02-29

    Hi All,

    I'm thinking of getting a Behringer Europort MPA30BT to use away from mains power. However, I need to be able to charge it from 12v DC, USB or other DC supply when mains is not available. Is there a DC charging input on this unit?

    Thanks for looking, Geoff

    read more...
    0 235
    • GeoffL
      Paul_Vannatto

      Hi Geoff @GeoffL 


      Welcome to the forum. The MPA30BT charges the internal battery from the AC input. Therefore the only way to charge it via battery is to use a sine wave type inverter.


       

      • February 28, 2020
    • GeoffL
      RexBeckett

      @GeoffL 


      Hello Geoff, welcome to the community.


       


      There is no DC power input on the MPA30BT. It requires 100-240 V at 50/60 Hz. If that is not available, you should be able to charge it from a 12Vdc supply through a small inverter like this. 

      • February 28, 2020
  • kmchez
    Contributor - Level 1
    2020-05-12

    I have  blown crossover.  I thought I blew the horn, but after replacing it, the scratchy sound cutting in and out is still there.  Can someone direct me where I can replace this part?  I can seem to find options for it.

     

    read more...
    0 50
Go to page