Statistics

165,420 members
161 posts
  • fterougas
    Contributor - Level 1
    2019-08-05

    Hi to everyone.

    Before one week I'm an owner and big fan of a Behringer X-Touch.

    I'm working with Logic Pro X and everything is more than perfect ... exept the issue that I have in the video.

    Every time I touch (just touch, not moving) the fader, it steps down the volume by -0,1dB.

    Does anyone know why?

    The firmware is 1.15

     

    Thank you in advance for your support.

    read more...
    0 114
    • fterougas
      Kinghuru

      It's funny that my problem, since updating the firmware is that my jog wheel is activated when I increase or decrease the volume slidder... this does not occur when I change the volume from the volume mixer inside the DAW, only when I change the volume on the hardware mixer itself...

      • October 4, 2019
  • PeterDeClippel
    Contributor - Level 3
    2019-09-26

    Hi,

    I remember seeing somewhere you can switch the x touch between using it as a mixer controller (XR18) and a DAW controller. But I don't remember and can't find it...

    Is this possible? I work with ableton live and use the XR18 as audio interface. I need control both over the interface and ableton live, and it would be awesome to do this with 1 controller!

    thanks

    read more...
    0 182
    • PeterDeClippel
      DaveMorrison

      @PeterDeClippel 


      Yes. Hold down Select on channel 1 as you power up. Then choose Xctl/MC (and the networking mode or MIDI DIN connection to the XR18). 


      Press the SMPTE/Beats button to switch between XR18 and DAW.

      • September 26, 2019
  • onesoundpro
    Contributor - Level 2
    2019-09-14

    I bought the all access Slate plugins to hopefully use with my X32 compact for LIVE mixing.

    Now I've been told I need a host software...DAW... to use the Slate plugins.

     

    I was told by someone in a pro audio department to use Cubase.

    But I don't want to spend any money on software until I can figure out what's going on.

     

    ??!! I need help !!??

    read more...
    0 141
    • onesoundpro
      Roblof

      The goto daw on the cheaper side is Reaper. You can evaluate it for some time and then pay a minor $60 for it.


      You can also try Ardour which is completely free.


      While not free, LiveProfessor is commonly used as a plugin host when a daw is an overkill.

      • September 16, 2019
  • Konsider
    Contributor - Level 1
    2019-09-07

    It may seem obvious, but just in case anyone was wondering how to get tracks 1-8 to appear on your Extender, and tracks 9-16 on the main X-Touch in Ableton, here is what to do:

    Go to your preferences in Ableton, and then on to the LINK/MIDI tab. Remove all control surfaces in the top section, so that all are set to NONE. Then, simply set up the Extender unit first, and the main X Touch second. Channels 1-8 will then be assigned to the extender.

     

    read more...
    0 88
  • SamsMusicFactor
    Contributor - Level 2
    2019-08-08

    Hi! I bought the X-Touch Extender and I am planning to use it exclusively for the cc midi controllers spaecially CC#1,7,11,21 . I tried my best to let it work but with no luck. I am using Logic pro x and I don't have any other x-touch controllers.

    Please advice!

    Thank you

    read more...
    0 222
    • SamsMusicFactor
      DaveMorrison

      Hi @SamsMusicFactor 


      The extender is not programmable. You'll have to make your assignments in Logic. I would try Ctrl mode first.

      • August 8, 2019
    • SamsMusicFactor
      SamsMusicFactor

      Thank you! @DaveMorrison! It worked on kontakt with libraries but not yet with Logic on CC midi controllers. When using MC mode it works with logic.

      • August 9, 2019
    • SamsMusicFactor
      DaveMorrison

      @SamsMusicFactor 


      The Extender is a weird beast. The only thing it seems to do well is MC (at least in logic). The reason I think Ctrl mode might work is that the Faders transmit CC in this mode as opposed to PitchBend when in MC mode. I think you would have to assign every Knob, Button and Fader in Logic to do what you want. @KenMitchell's advice is very sound as the compact is more versatile.

      • August 9, 2019
    • SamsMusicFactor
      DaveMorrison

      @SamsMusicFactor 


      Nothing on the Extender can be changed (apart from the operating mode).


      Have you tried something like this: https://www.youtube.com/watch?v=Bm77G15H6zo

      • August 11, 2019
    • SamsMusicFactor
      SamsMusicFactor

      @DaveMorrisonYes! I tried this and it works on instruments or any knotakt library, you can easily assign faders or encoders to already programmed libraries or intruments inside Logic. But I can't find a way to program midi controllers CC#. Maybe there is a way OR AS YOU GUYS SAID IT'S NOT RE-PROGRAMMABLE !!

      • August 12, 2019
  • AyChords
    Contributor - Level 3
    2019-07-22

    Hi guys, how do I view the remaining of my Aux buses on XTouch? I am able to see Aux 1-8, but can’t view the remaining Auxes. I’ve tried the navigation buttons, not working.

    0 183
    • AyChords
      DaveMorrison

      @AyChords 


      Are you connected to an X32 or X-air (or Midas equivalent) mixer?


      Or are you connected to a DAW? If so, which one?

      • July 22, 2019
    • AyChords
      AyChords

      DAW, Samplitude Pro X4 Suite

      • July 22, 2019
  • sandrocavali
    Contributor - Level 1
    2019-07-15

    X-Touch One brand new firmware 1.07

    DOES work with older Windows computers

    DOES NOT work with brand new HP Envy AMD Ryzen 7 3700 notebook. Windows 10 build 1903 completely updated.

    USB "Driver Error" message. Reinstalled all possible combinations of drivers, Updated all possible updates. No antivirus, no firewall. Tried several cables. Tried third party drivers.

    Anyone has the same problem? Thank you!

    read more...
    0 92
  • Szwagier
    Contributor - Level 1
    2019-07-12

    Hi,

    My trusty BCR2000 refuses to work in Windows 10 64-bit. As soon as  I switch it on, I get a "device has malfunctioned" error message. I can't install the Behringer 64-bit driver because every time I try it gives me a timeout error.

    I've tried swapping USB ports, buying a new USB cable, administrator mode, and all the Windows compatibility options with no success.

    I'm all out of ideas and it's doubly frustrating because I keep hearing from people for whom the combination works fine. Any suggestions would be gratefully received.

    Thanks.

    read more...
    0 141
  • AyChords
    Contributor - Level 3
    2019-07-11

    Hi guys, how do I register my x-touch? I can’t find my way out on the website.

    0 171
  • KenMartin
    Contributor - Level 2
    2019-06-11

    Okay just to clarify my finding using Samplitude 4 Pro.

    I have two X Touch controllers running with Samplitude 4, according to the Magic help file the second controller must be a signed to Mackie XT  this is not correct. By trial and error the second controller must be a signed to Mackie Alternate Scale. Once a signed you will see two midi assignments for the X Touch. In my configuration the top is the master he is 1-8 and the bottom is the slave 9-16. Also please remember that when you open Samplitude you will need to always asign the second unit if you are using more than 8 tracks. Samitude does not save the config automatically, but this only takes a few second to setup so there no hardship. All fuctions work perfectly in sync and you can add up to for units if required.

     

     

     

    read more...
    0 94
    • KenMartin
      AyChords

      @KenMartin I have the same issue but how can I assign tasks to the Function Buttons? Also the Automation buttons are working in opposite tasks, for example, if Latch button is pressed, it will activate Write task.


      is there anything I’m not doing right in the setups?

      • July 10, 2019
Go to page