Statistics

165,442 members
197 posts
  • sprpcn
    Contributor - Level 1
    2019-11-06

    Good evening, guys.

    I'm a little confused and it's a very strange question... but...

    I've bought umc404hd a week ago and I'm not able to download drivers from the official site behringer.com

    I've tried to do this from here from "downloads", but it redirects to behringer.com again and it shows me 502 error (bad gateway). I've tried several computers and several internet connections, everything is the same

    Is it a website issue?

    So, how can I get the drivers?

    Thank you.

    read more...
    0 328
  • MichaelMcBroom
    Contributor - Level 2
    2019-10-26

    My UMC404HD's Control Panel displays the existing sampling rate but there is no way to change it from within the Control Panel. So I tried to change it from within the software that I've been using with it -- Cakewalk. I can select a different sampling rate and the software changes, but the UMC doesn't. It remains stuck on 48k right now. I would like to set it to 44.1k. I'm getting audio drop outs because of the mismatched sampling rates.

    I tried  it with another piece of software -- Band in a Box. BiaB only supports 44.1k. So when I booted BiaB and then configured it for the UMC, the software did manage to change the UMC404's sampling rate to 44.1k. So I guess I'm wondering why the UMC will change for one piece of software and won't for another?

    Independent of any non-Behringer software, is there any sort of secret method I can be employing to get the UMC's sampling rate to change?

    read more...
    0 334
    • MichaelMcBroom
      MichaelMcBroom

      I dont seem to be able to edit my post, so I guess I'll just add to it. I figured that I'd won this round via a roundabout method of forcing the UMC404HD to 44.1k by booting up software that only supports this sampling rate. Well, the sampling rate of the UMC remained at 44.1k while I had Band in a Box open and even remained at 44.1k after I closed Band in a Box. But as soon as I opened Cakewalk and loaded the file -- that has been configured at 44.1k -- the UMC switched back to 48k. WTF. Now why'd it have to go and do that for?  So, any ideas?


       

      • October 26, 2019
  • RonnyFunk
    Contributor - Level 2
    2019-10-23

    I was impressed by the reviews, features and price of the CT-100. I ordered this, thought "Now I can check the cables, label them and sort them perfectly".

    Instead I got a box with no function, with a wonderful screw, that din't response to any screw driver, no movement, the screwdriver made scratches or did anything, but moving the screw.

    Ok, I thought, it would be one item only, but the replacement has the same issue.

    So I guess, there are much of these Cable Testers, that tests only the customers.

    I am pretty angry about this little box, who is praised, but did nothing, than stealing my time.

    Now, when I write it, I couldn't do anything to my cables, to ensure, that there aren't cables with malfunction in my cable box.

    I lost much time, that I spend with this item instead to use it as tool.

     

    read more...
    0 112
  • Beacher
    Contributor - Level 1
    2019-08-15

    I have had an XR18 for over a year now. Use it all the time with our band. Never a problem until now. Today when setting up, we were getting a pulsating "pop" in the monitors. This also happened at a recent gig but after a one power down/up it went away. I noticed when looking at the XR18 that the "power light" was also pulsating. Turned everything off/on and the power light kept on pulsating as before. Unplugged everything except power chord, no difference., Turned off/on several times, no difference. Tried different outlet, no difference. Tried another power chord, no difference, turned off .... waited about 10-20 minutes while doing other things, turned back on and it worked. No pulsating pop and no pulsating power light. Seems to be working ok. Has anyone experienced this behaviour before ??? Smells like a possible power supply problem to me?? Getting nervous. Wondering if I should have it looked at although random things are often very hard to fix? 

    read more...
    0 226
    • Beacher
      Beacher

       


      Follow up on this issue ....


      They needed to replace part# A09-AW700-00000 (PCB, 409061 REV-A).


      Part was $69.69 CDN Labor was $100 CDN (1hr bench time) - repair time 8 weeks in total !!!! Went in Aug 27/19 picked up Oct. 21/19. We were LUCKY to have a spare from a friend to use while waiting, otherwise we would have had to buy a new one to do our gigs. No way to rent one where I live. This is the problem with getting stuff fixed in our country (Canada). The wait times can be absurd. This was a 1 hr fix after the part was obtained. Other than that, the unit and the concept was worked flawlessly for us over about 3+ years.

      • October 22, 2019
  • sks700
    Contributor - Level 1
    2019-10-20

    As I understand Audacity does not support ASIO driver for multi channel recording

    I want to record acoustic drums and I have 7 microphones, I have tried Studio One and Reaper. Both of the programs supports ASIO but it does not seem to work to map multi channels to each input to be able to record snare for channel one, Toms to channel two, three and four, kick at five and so on. The only sound that comes thruu or is recorded is over head mics. 

    Does the mixer have support togheter with ASIO and any PRO program for my needs or have I been cheated to buy a product I cannot use?

    Any ideas someone?

    read more...
    0 188
    • sks700
      KenMitchell

      Hi Par ( @sks700 ), 


       


      Welcome to the community.  The x2222 only has a 2x2 USB audio interface so the best you can record is a copy of the Main Stereo Mix.  You will need something like a Behringer X18 or XR18 mixer or a UMC1820 audio interface to record 7 tracks in parallel.  I'd recommend returning the x2222 and picking up a UMC1820. 


       


      Ken

      • October 20, 2019
  • Mikec1124
    Contributor - Level 2
    2019-10-16

    Bought a UM2. Install and went to record. Levels were really low.. Thought it was a driver problem. Went to Behringer website and downloaded latest drivers. Installed. Now, the driver show up but I am not getting any input or output signal to my computer.. Please help!!!

    read more...
    0 271
    • Mikec1124
      KenMitchell

      Hi Mike ( @Mikec1124 ), 


       


      Welcome to the community.  What OS are you running?  For Win10 no driver beyond the default Win10 audio driver is needed. In fact, the old Behringer drivers are known to have problems on some systems with Win10.  To remove the Behringer drivers, go into Device Manager, select the UM2 device, delete it, and confirm that you also want to remove the drivers for the device.  Unplug the UM2, reboot, and plug it back in.  This should install the default Win10 drivers.  At this point, we need to look at what software you are using for recording to determine why your recording leverls are low. 


       


      Hope this helps, 


      Ken


       

      • October 16, 2019
    • Mikec1124
      Mikec1124

      Ken,


      Thanks for responding.. Yes it is windows 10 and Im running Pro Tools. If I delete the UM2 will that effect my Pro Tools ?  After I delete then plug the UM2 back in my computer will recognize it or will I have to reinstall it at that point?


      Thanks again for your help. Ill wait to hear from you before I do anything.

      • October 16, 2019
    • Mikec1124
      KenMitchell

      Hi Mike, 


       


      Yes. The Delete, Un-Plug, Reboot, and Re-Plug cycle "should" re-install the default Windows 10 drivers.  What version of PT are you using?  You may have to use ASIO4ALL to get ASIO support for the UM2.  To be honest, that isn't the best interface to use with ProTools. Something in the UMC HD family (202HD, 204HD, or 404HD) with native ASIO drivers would likely give you less trouble.  


       


      While I don't use PT, I do have a copy of ProTools First so I should be able to guide you somewhat. 


       


      Ken

      • October 16, 2019
    • Mikec1124
      Mikec1124

      Ken,


      Is it possible its named something else? I go into device manager and I dont see anything the say UM2..

      • October 16, 2019
    • Mikec1124
      KenMitchell


      @Mikec1124 wrote:


      Ken,


      Is it possible its named something else? I go into device manager and I dont see anything the say UM2..





       


      Hi Mike, 


       


      Look under "Sound, video and game controllers" or under "Audio inputs and outputs".


       


      Ken 

      • October 16, 2019
  • mixerking
    Contributor - Level 2
    2019-10-13

    No menu tabs showing on android 8.1 or 9.

    0 105
    • mixerking
      mixerking

      HI , had same problem with newer tv boxes , download Mixing Station Air , free , Google PLaystore , with additions around £5.


      Same as xair  but laid out different , few minutes to work it out. Very good.

      • October 13, 2019
  • mixerking
    Contributor - Level 2
    2019-10-13
    0 105
  • mixerking
    Contributor - Level 2
    2019-10-13
    0 100
  • Sp00kyD
    Contributor - Level 1
    2019-10-09

    Is there a way to adjust the Q of the channel EQ with my mouse while controlling my XR-18 with my PC laptop. 

    Thanks in advance 

    0 149
    • Sp00kyD
      Paul_Vannatto


      @Sp00kyD wrote:


      Is there a way to adjust the Q of the channel EQ with my mouse while controlling my XR-18 with my PC laptop. 





      Move the cursor to one of the parametric band's dots and use the scroll wheel

      • October 9, 2019
Go to page