Statistics

165,420 members
161 posts
  • grahamwafer
    Contributor - Level 1
    2020-01-17

    Hello everyone,

    I find the connection at the back for the power cord very shallow and does not fit tight. The weight of the cord pulls the plug slightly down and does not seat properly. 

    Also, what is the threaded hole at the top of the speaker for and where can I find the size of the threads.

    Thanks so much

    read more...
    0 106
    • grahamwafer
      kensh999

      Hi, I have 2 B210Ds and I love them SO MUCH!  Also, both have very snug power ports so I would inspect yours to see if there's some kind of debris shoved in there...  Also, the threaded hole in the top is for the optional Wall Mount Speaker Brackets.  Hope this info is helpful, Ken


       

      • January 27, 2020
  • ccrump98
    Contributor - Level 3
    2020-01-27

    How can I connect an Orange Crush amplifier to the Behringer X32 compact? 

    0 47
  • maldcroft
    Contributor - Level 1
    2020-01-24

    Just received my Behringer mpa40bt Pro. Charging it before use as instructed. Should all four LED lights be lit at the same time?

    0 28
  • albertodertycia
    Contributor - Level 1
    2020-01-22

    Hi!

    I need a woofer 5" for the Tannoy Mercury V1i , or your coil.
    model 3121 0208 type 1328

    someone knows where to buy it

    I can't find it anywhere
    thanks

     

     

    read more...
    0 110
  • oregandave
    Contributor - Level 1
    2019-10-13

    Just wanting to keep with the turbo sound brand and look and am looking for subs that would compliment the ip300s. Was looking at the ip12b but have no use for the extra power amps for passive tops and also would need a crossover from what I've been reading. Any help/suggestions would be very welcome.

    read more...
    0 120
    • oregandave
      oregandave

      Anyone ?

      • January 17, 2020
    • oregandave
      Diepsloot

      What is the main way you are using them? Mobile dj, solo musician, indoors, outdoors, corporate events? Maybe someone's ears might perk up to help if you are more specific and they can tell you what use they have given them. 

      • January 18, 2020
  • richg45
    Contributor - Level 1
    2020-01-12

    Can you use a different mixer with the Inspire 1000? I need more channels

    0 104
    • richg45
      DaveMorrison

      @richg45 


      Yes. That's the way most people would use it. 

      • January 12, 2020
    • richg45
      Diepsloot

      I'm a Mobile Dj and use this behringer mixer to give me a few more channels, for say more mics or instruments, or emergency inputs like a phone or another bluetooth receiver. The mixer allows me to have an output channel for a monitor in which I control the volume right on the mixer. It also allows me more headroom, more volume control than just a computer and a controller by itself.  
      BehringerX1204 USB - 12 Input 2/2 Bus Mixer with EFX and USB
      fcdd8d45545f5b79e3667b5d23c73da6.image.500x500

      • January 18, 2020
  • Mateusz
    Contributor - Level 2
    2020-01-14

    Hi!

    I am considering buying NuQ 118B-AN subs and I have a question regarding that model. In the picture presenting back of the speaker there are 4 bolts in each corner (16 in total). Are they indented for wheels? Does the speaker come with wheels in the box, as the iQ18B does? Manual nor product page says nothing about attaching wheels, so I am a bit confused.NuQ118B-AN_P0B4K_Rear_L

    Thank you in advance for clarification!

    read more...
    1 126
    • Mateusz
      GaryHiggins

      @MateuszI'm not an employee but those holes are for the wheels and I would be very surprised if the wheels were not in the box-I would protest loudly if not

      • January 14, 2020
  • wookiem
    Contributor - Level 1
    2020-01-12

    I've read somewhere that Turbosound products now have a 10 year warranty, can anyone confirm this?

     

    Cheers

    0 193
    • wookiem
      GaryHiggins

      @wookiemIt's true, it's true, it's all true! Edit: Seriously as far as I know they have the same 10 year warranty as Midas

      • January 11, 2020
    • wookiem
      wookiem

      Thanks Gary

      • January 13, 2020
  • yaboymichaeld
    Contributor - Level 1
    2019-11-09

    Hi all,

    I just purchased a pair of Behringer DR - 115 DSP'S and got to try them out today.

    Very nice sounding speakers and a lot of control with the DSP in terms to EQ's and crossovers etc.

    I'm a bit confused though in regards the limiting applied to this speaker it seems to display LIMIT on the LCD randomly. It's doesn't matter what level the input is at it will say LIMIT at low volumes and at high.
    This is annoying as honestly I don't know where the true limit is of the speaker.


    I'm running from Pioneer decks via XLR to the Behringer. volume on the Pioneer is at 12 OClock and the output meter reads -16db or so . Input gain is at 12 oclock and the volume on the LCD is at 0DB on the Behringer.

    There is an input meter which monitors input on the LCD of the Behringer and this is 1/4 of the way full when playing something through the speaker, I feel I'm nowhere near clipping either.

    I'm wondering if anyone could either shed light on any similar situations like this they had or if (God forbid) I should send the speakers back.

    read more...
    1 122
    • yaboymichaeld
      JeffStevens

      Are you hearding noticeable level differences when the limit is displayed?  Maybe it is a soft limit to protect from peaks.  What listening mode are you in (DJ, Live, etc.)?  What is the source of the music?  (many downloaded mp3's have unwanted artifacts that may be triggering this).


      Will the speakers still get loud or is the limiter choking the level?


      I wouldn't be bothered by a limiter coming on.  That is different than a peak or clipping display.  I wonder if certain listening modes have a lower threshold on the limiter?

      • January 13, 2020
  • rodj54
    Contributor - Level 1
    2020-01-11

    How long did it take for a response from the Tribe? My Behringer Sub woofer 1500 when out and I just had it for 6 months. Are the fast enough to get my work order number? I tool the speaker there just waiting them

    0 40
Go to page