Statistics

165,420 members
161 posts
  • JacquesMathez
    Contributor - Level 3
    2020-04-11

    Hi,

    When searching "Turbosound edit PC" in the download section of Turbosound, i only find V1.1

    When I downloaded and installed it, one or two years ago, it was V1.3.

    Also, a google search with "Turbosound edit PC V1.3" returns with "no results".

    Strange, no? 

    read more...
    0 78
  • Armand_RSA
    Regular Contributor - Level 1
    2020-04-12

    When you select different X-over options on the Turbosound IQ-18B it makes a very loud "POP". In the video you can see it actually pushes the OUT level to LIMIT. If you adjust the X-over on the IQ unit itself it does the same. 

    HW:B - Firmware 2.2

    Here is a video to show: (https://youtu.be/CFG1_xyOBoo)

     

    read more...
    0 55
    • Armand_RSA
      AlexLane

      Hi @Armand_RSA 


       


      Reply from the firmware engineer:


       




      "I will have a look at those issues asap. 


      Right now I don't have any hw here at home so I have to pick up the demo board from the office.


      I'll come back to you soon... thanks for the feedback!"

      • April 13, 2020
  • Gagandeep
    Contributor - Level 1
    2020-02-12

    I have ip 15b, its output channels are working good but sub has no audio output 

    0 91
  • Armand_RSA
    Regular Contributor - Level 1
    2020-04-05

    Hi all,

    Can the engineers please have a look at the firmware 2.2 on the IQ's. 

    2 things to check: 


    1 - The input/output level meters on the LCD (and on the Turbosound EDIT software) indicates that the "IN" stage (pre DSP) CLIPS before the "OUT" (pre amp) stage. 

    Here I have a thread about it: https://community.musictribe.com/t5/Loudspeakers/Turbosound-IQ-Series-Input-vs-output-levels-FW-2-2-and-limiter/td-p/277885

     


    2 -  The FBQ Feature does not operate correctly. The LEARN feature produces no "click" as the HW:A units do.

    Here is a thread about this issue: https://community.musictribe.com/t5/Loudspeakers/Turbosound-IQ-Series-FBQ-Questions-Release-time-Auto-vs-Single/td-p/277951


    Regards

    read more...
    0 67
  • Farsetbelfast
    Contributor - Level 1
    2020-03-10

    Hi guys I'm looking for processor settings for turbosound tq315.

    If it helps I'll be running them passively using a turbosound lms d24 processor. 

    0 91
  • callanberry
    Contributor - Level 1
    2020-04-04

    speaker no longer powering up.  lim led flashes briefly when powered on

    0 57
    • callanberry
      RexBeckett

      @callanberry 


      Hello Callan, welcome to the community.


       


      I suggest that you raise a Care ticket for Service Repair explaining your problem. This is done by clicking on Support at the top of the page and then clicking the Create a Care Ticket button. This is only possible if you have completed all the required fields in your profile. Make sure that you fill-in every required field on the Care form.

      • April 4, 2020
  • Doclabig
    Contributor - Level 1
    2020-04-02
    0 35
  • buskerer
    Contributor - Level 3
    2020-03-22

    Hello everyone,

    Would the signal output from a channel's balanced input using a TRS jack on that input be true stereo? I've been running the stereo left/right outputs from my guitar effects unit through the PPA200's stereo channel which has left/right inputs and it sounds beautiful. The thing is I'd like to use that channel for something else, hence my question.

    Thank you for your time.

    read more...
    0 78
    • buskerer
      Paul_Vannatto


      @buskerer wrote:


      Would the signal output from a channel's balanced input using a TRS jack on that input be true stereo? 





      No, balanced TRS input is not a stereo input. It uses the same 1/4" jack. But the pinouts are different. A balanced TRS has pin 1 = shield, pin 2 = hot+, pin 3 = hot- (180 degrees out of phase).


       

      • March 22, 2020
  • ZDD1010
    Contributor - Level 1
    2020-03-18

    Hello all. I recently purchased the Studio 50USB studio monitors from a seller on Reverb. The package is an unopened package and the speakers were brand new warranty replacements. Initially, when I turned the speakers on, there was a repetetive clicking and the speaker turned on and off with the clicking every second or so. With some work with the power cable, I was able to get the speakers to stay on, however, now there is no sound coming from them at all. I was using the quarter inch input ports as well as the usb ports directly from my computer. Anybody have an idea of what the problem could be?

    TL;DR - Speakers are new but no sound comes out when powered on.

    read more...
    0 41
  • buskerer
    Contributor - Level 3
    2020-03-17

    Hello everyone,

    As there isn't an on/off switch for phantom power on the PPA200, not that I can see anyway, how does the unit know if a dynamic or a condenser microphone is being used?

    0 135
    • buskerer
      RexBeckett

      @buskerer 


      There's no magic at work. Phantom power will always be connected to the XLR inputs. This should not harm dynamic mics as long as they are wired correctly with balanced XLR cables.

      • March 17, 2020
    • buskerer
      buskerer

      Thanks Rex - I was kind of hoping for magic but there you go.


      You say "should not harm dynamic mics", I'd really rather it was "most definately will not harm". I have an expensive Sennheiser dynamic vocal microphone which I wouldn't want to be fed with phantom power in any circumstance.


      Just out of curiosity, and if you know, why was no phantom power on/off switch part of the design of this unit? All my various other units with a phantom power option have an on/off switch or button - in fact the PPA200 is the only unit I've ever seen that doesn't have one.


      All my XLR cables are balanced.

      • March 17, 2020
    • buskerer
      RexBeckett


      @buskerer wrote:


      Thanks Rex - I was kind of hoping for magic but there you go.


      You say "should not harm dynamic mics", I'd really rather it was "most definately will not harm". I have an expensive Sennheiser dynamic vocal microphone which I wouldn't want to be fed with phantom power in any circumstance.


      Just out of curiosity, and if you know, why was no phantom power on/off switch part of the design of this unit? All my various other units with a phantom power option have an on/off switch or button - in fact the PPA200 is the only unit I've ever seen that doesn't have one.


      All my XLR cables are balanced.





      @buskerer 


      I would be happy to connect my Sennheiser, AKG and Rode dynamic mics to inputs with phantom. I would be less confident of unknown brands. If you are really concerned, you could get a phantom blocker .


       


      I don't know why the usual phantom on/off switch was not provided on the PPA200. We might guess that it was a design-to-cost decision.

      • March 17, 2020
    • buskerer
      buskerer

      Blimey! A Phantom Blocker - I'd never have guessed such a device existed.


      Thank you Rex, you've been very helpful yet again.

      • March 17, 2020
Go to page