Statistics

165,388 members
97 posts
  • Pavel-Cerny
    Contributor - Level 1
    2020-01-22

    Hallo,

         Now I'm install MacOsX Catalina - impossible to used with IntelliDrive for my 6x IPD2400, is big problem for me. Please inform us when will ready for Catalina - your last update was in 2017, is time for next upgrade.

    Thanks, Pavel

    read more...
    0 119
  • jboehme
    Contributor - Level 1
    2019-12-13

    Hey, the LAB Control Software for Mac OS Catalina do Not work. When the new Version Come out?

    I need it so soon as possible!

    0 225
    • jboehme
      AlexLane

      Hi @jboehme 


       


      Could you confirm which software you are reffering to? Do you mean the device control software used to monitor C and FP series amplifiers?



      Thanks,


       

      • December 15, 2019
    • jboehme
      jboehme

      I mean the LabGruppen Drive Controller for IPD1200 and IPD2400 Amps.

      • December 19, 2019
  • Armandovh
    Contributor - Level 1
    2020-03-24

    He stopped listening and all the lights on the microphones began to blink

    0 75
    • Armandovh
      RexBeckett

      @Armandovh 


      Hello Armando, welcome to the community.


       


      I suggest that you raise a Care ticket for Service Repair explaining your problem. This is done by clicking on Support at the top of the page and then clicking the Create a Care Ticket button. This is only possible if you have completed all the required fields in your profile. Make sure that you fill-in every required field on the Care form. Watch your email spam folder - some responses have been missed through this.

      • March 24, 2020
  • Gaylen
    Contributor - Level 1
    2020-03-20

    I have purchased the Amp Combo above in the subject line.  I would like to know if this amp will accomodate a 10 or 12 inch speaker to replace the 8 inch that it is going to arrive with.

    This is all new territory for me, but I have a 10" 35 watt to use in this 15 watt combo.

    Thanks for your help

    read more...
    0 39
  • Amaral
    Contributor - Level 1
    2020-03-18

    Boa noite.

     

    Comprei um amplificador beheringer NX 3000D USB , gostaria de saber  para que tipo de eventos posso usar? bar , restaurante, arena , casamentos ? e quantas colunas devo usar e de quantos watts?

     

     

    read more...
    0 83
    • Amaral
      GaryHiggins

      @Amaral


      Pardon my translating software


      Hola, creo que puedes usar tu amplificador en casi cualquiera de esos lugares, tal vez no en una arena . En cuanto a los oradores, creo que eso también se basa en la necesidad. Creo que con los altavoces de 8 ohmios tienes alrededor de 400 vatios por lado, la potencia aumenta en función de lacarga hasta el máximo. Se duplica aproximadamente a medida que aumenta la carga. 800 vatios para 4 ohmios, 1500 para 2 y 3000 valores reales de adivinación en puente, pero esto debería estar cerca.

      Behringer NX3000 Specs



      • 2 Ohms: 1500 W per Channel.

      • 4 Ohms: 900 W per Channel. 3000 W Bridged.

      • 8 Ohms: 440 W per Channel. 1500 W Bridged.


      • March 18, 2020
  • jordanae
    Contributor - Level 1
    2020-03-08

    Recently, my audio set up has stopped working. The Nu3000’s display lights are red and now the audio only plays in a short burst when I first turn the amp on. During this burst, the indicator light for the channel I’m using will flash from red to orange before returning to red.

    The board where I’m inputing the audio feed is picking up the audio (the L/R audio light bars are jumping to the beat of the songs, so I know that’s working). Additionally the speakers, as indicated by them being able to play those short burst so of music seem to be working fine. 

    Does anybody have any help they can provide? I have an event coming up in a week that I need to be ready for.

    Thanks for your help in advance. More details of my setup follow.

    This audio set up has been working for years with an inuke nu3000 amp, an Allen & Heath zed10fx board, and two electro voice  ekc-15 speakers.

    read more...
    0 60
    • jordanae
      DeclanSlater

      Does the amp do the exact same thing (red, then orange for a second, then red again),  when no speakers or inputs are connected?  

      • March 9, 2020
  • bohiggs
    Contributor - Level 1
    2020-03-04

    When I plug in my new PPA500 - lights on the display blink randomly. There is no proper connection and the system is unusable. I have tried a new fuse. 
    Any suggestions are welcome. Thanks guys.

    0 86
    • bohiggs
      RexBeckett

      @bohiggs 


      Hello Bo, welcome to the community.


       


      If it is new (<30 days), I would contact your supplier for a return/replacement. Otherwise I suggest that you raise a Care ticket for Service Repair explaining your problem. This is done by clicking on Support at the top of the page and then clicking the Create a Care Ticket button. This is only possible if you have completed all the required fields in your profile. Make sure that you fill-in every required field on the Care form.


       


      Keep a watch on your email spam folder. Some replies from the Care team have been missed that way.

      • March 4, 2020
  • ArtMorgan
    Contributor - Level 1
    2020-03-04

    i HAVE THE BEHRINGER ULTRACOUSTIC ACX 1000, I WAS WONDER IF IT IS POSSIBLE TO USE A MIC AND GUITAR AT THE SAME TIME ON CHANNEL 2 OF MY AMP

    0 87
  • jonsen01
    Contributor - Level 1
    2020-02-29

    Have 3 missing control knobs and corresponding D-shafts - can easily get the control knobs but can't seem to locate the relevant D-shafts, which seem to be differntly size to fit the knob and the receptor

    0 46
  • JSA
    Contributor - Level 1
    2020-02-28
    0 44
Go to page