Statistics

165,365 members
43 posts
  • Ralph
    Contributor - Level 2
    2020-03-16

    Hi guys,

    Will anyone confrim yhat the Ipact Twin is compatible with El Captain?? Is so, wich driver version should i download. Cheers Friends !

    0 67
  • magra
    Contributor - Level 1
    2020-03-15

    Hallo you all,

    i've got a new X-Touch (the big one) and have got some problems with te Solo buttons on the X-Touch Controler (with X32, X32 Rack and X32 Core) connectet to a Laptop.

    i have selected in the monitor section "Solo Exclusive". Then pushing a Solo Button on the X-Touch shows the Solo button pressed in the X32-edit software. Pushing one or two other Solo buttons on the controler adds the channel Solo buttons in the software to the other one selectet before. I expect, that one Solo button would replace the others. Is there a bug in the X-Touch software or is the X-Touch damaged?

    Many thanks from Germany

    Martin

    read more...
    0 73
  • LucasSilva
    Contributor - Level 1
    2020-03-07

    Hi everyone.

    My english is not that good but I need some help.

    I have some weird issue in my Impact Twin: Audio only comes out the interface (through phones or line outs) when there's a xlr connected to channel 1, with pins 1 and 3 shorted and phantom power turned on.
    Audio stops when the phantom power is turned off or when the xlr is removed from channel 1.
    I discovered that by accident when plugging/unplugging a P2/XLR cable.
    I don't know if it's an electronic or a logical problem, but everything seems to be Ok in TC Near (every meter and patch is normal).

    Have anyone ever seen something like this?!

    Hope you can help me.
    Thanks

    read more...
    0 98
  • phase
    Contributor - Level 1
    2020-03-05

    Hi

    I’m looking for the best solution to digitally connect my KH750 Neumann subwoofer to my Tc BMC2 converter.
    The KH750 has a AES3 BNC input
    The BMC2 has a AES3-id/ 75ohms SPDIF RCA Output

    As the KH750 has digital processing inside, I’d like to avoid any extra digital<->analog conversion between the converter and the speakers.

    Unfortunately, I’m not aware enough about digital links and this require very precise knowledge.

    Level, impedance, cables, converters, adapters, RCA, XLR, BNC, so many options.

    Some infos here : KH750 : browse operating manual here https://en-de.neumann.com/file-finde...egory=monitors

    Thanks for your help

    read more...
    0 113
    • phase
      RexBeckett

      @phase 


      Hello Jean, welcome to the community.


       


      The BMC2 digital output and KH750 digital input are electrically compatible. The simplest way to connect them is to use a RCA/RCA digital cable like this with an RCA/BNC adapter like this at the KH750 end.


       


      The KH750 manual suggests that the maximum cable length for an S/PDIF source is 10 metres. Although it is marked SPDIF, the BMC2 digital output is actually to the AES-3id standard so can drive much longer cables.

      • March 4, 2020
    • phase
      phase Thank you ?

      Then for this link, do I have the other option to use a 75ohms BNC cable with a RCA to BNC adapter ?
      • March 4, 2020
  • emperor12
    Contributor - Level 1
    2020-03-04

    Hi there. Enjoying this thing but.....In logic pro x (latest) when I am on a virutal intrument chanel and adjust the fader ont he hardware.....it opens up the plugin and enables "channel link" its super annoying. Even if I disable channel link and close the window and it just does it again when I re-use the fader. Anyone know how to disable this? I am using hte mackie mcu thing...thanks.

    read more...
    0 38
  • 61pandrea
    Contributor - Level 1
    2020-02-01

    Hi! I've bought a TC Studio Konnekt and i can' reinstall the software TC. Why? The display say: you can't install this program on this PC!.

    Yesterday was running

    0 76
    • 61pandrea
      TC-Claus

      Hi 61pandrea,


      Your macOS might be too old to run the "new" installer. Send me a PM and I'll drop You a link to an older version of the TC Near Software.


      All the best from


      Claus

      • March 4, 2020
  • Ras
    Contributor - Level 1
    2020-01-31

    Hi all, 

    I want to connect a clarity m to my editing workstation. 

    I mostly use Adobe premiere and a little bit Avid MC.

    My I/O card has no optical in or out. Can I do it just with usb3 directly into my computer or do I have to connect it with my I/O card.

    Thanks for helping me out. 

    read more...
    0 111
    • Ras
      verendus

      You should be able connect via USB and then use a plug-in (AAX for Avid MC, VST for Premiere) as a track effect for your metering.

      • February 1, 2020
    • Ras
      TC-Claus

      Hi Ras,


      Verendus is right! If You have AES out You can use that as well ...


      All the best from


      Claus

      • March 4, 2020
  • rcarline
    Contributor - Level 2
    2020-01-09

    Hi, since moving to the new 2019 Mac Pro which comes with Catalina Pre Installed, i can't get the Clarity M Stereo (V2) to be detected by the plugin. I've tried both the AU and AAX plugins, (Logic, Pro Tools) and Unplugging / Pluggin the Clarity M USB Cable, and reinstalling the software / Restarting the Mac. 

    The computer was set up from scratch, no files were migrated over from an old installation.

    MacOS 10.15.2

    Any ideas?

    Thanks,

    Ryan

    read more...
    0 236
    • rcarline
      KenMitchell

      Hi Ryan ( @rcarline ), 


       


      Welcome to the community.  I'm not familiar with the ports on the new Mac Pro but are you connecting through any kind of hub or port dock?  I know that Thunderbolt to USB docks have been known to cause problems. 


       


      Hope this helps, 


      Ken 

      • January 9, 2020
    • rcarline
      rcarline

      It has 2 regular USB A female ports on the back which feed USB 3 hubs, and 4 USB C ports. 


      When the Clarity M didn't get detected using the usual connection to the hub, i connected it directly to a USB C port (with an Apple USB C to USB adapter) and it was still not detected. 


      As this is MacOS Catalina, I checked System preferences / Security after installing, to see if the a driver was being blocked but didn't see any problem.

      • January 9, 2020
    • rcarline
      TC-Claus

      Hi rcarline,


      Have You tried running the installer again ?


      All the best from


      Claus

      • March 4, 2020
  • wiltsey2000
    Contributor - Level 2
    2020-01-08

    Put in a tech claim and heard nothing.  This begringer tech support is crap. 

    anyway, does anyone know if there is a factory reset procedure on the xtouch one.   I just got a new one and the display times/measures/etc is frozen and does not count with the session in play. 

    also some of the button lights stay on even when not engaged.  

    firmware is updated and the daw is correct. 

    Any help?

    read more...
    0 237
    • wiltsey2000
      DaveMorrison

      @wiltsey2000 


      It's very possible the DAW is the problem and every DAW has different MCU/MIDI implementation. What DAW?


      To contact Behringer, Use the automated support system at the top of this page. Look for a response in your spam folder as they often end up there. As of this time, calling is not an option?

      • January 8, 2020
    • wiltsey2000
      wiltsey2000

      Logic is my DAW.  I have logic selected on the controller and it's selected within the daw.  Everything works as should except display numbers and the button lights.  Is there a factory reset on xtouch one? Thanks 

      • January 8, 2020
    • wiltsey2000
      DaveMorrison

      @wiltsey2000 


      Logic has great MC implementation. Have you done Logic Pro X: Control Surfaces : Rebuild Defaults ? Or Deleted the X-Touch's Icon?


      The only way I found to reset my X-touch is to Power Off/Power On or reinstall the firmware. It's usually Logic that gets confused. That being said, my X-Touch (not the One) had a bad ethernet port. Back then Behringer's customer support was good and I had a new one in a few days. These days, however, I'd seriously consider taking it back to Guitar Center and exchange it.

      • January 8, 2020
  • sirtezza
    Contributor - Level 1
    2020-01-07

    No new drivers For Konnekt is not good business, here’s why….

    I have a TC Electronic Konnekt6. It has been a good workhorse for a number of years. I have recently upgraded my iMac and have found that old drivers aren’t suitable for the new OS, they haven’t been updated. The tribe has decided not support these older units, basically rendering my interface useless. I have strong feelings about this and would like to express them here. (Not that anyone from the ‘tribe’ will really care).
    I’m trying to understand this cynical decision to no longer support older units, there is no practical or technical reason, updating the drivers to 64 bit would be a simple task, they could even charge a small fee that I’m sure most would happily pay, but no, no new drivers, in the bin with your perfectly functioning units and off to the shops to buy a new one. A poor decision on so many levels! This toxic, ‘sales at any cost’ mentality can only be described as short sighted at best, cynical and highly corrupt at worst. To treat your loyal customers in this fashion has surely begun a slippery slope to the bottom. I will be telling as many people as I can about this and will go out of my way to have people understand what has happened. If you buy a product from these people, not too far down the line THEY WILL SHAFT YOU!

    read more...
    0 114
    • sirtezza
      dzemal5

      Hi,


      I have a konnekt 24d. I also need this answer, what are we going to do? Do we need to just walk away, and buy new product? Please advice. I need near control panel for my mac catalina 10.15.4.


       


      best!

      • April 30, 2020
    • sirtezza
      barbaroja

      Wow this is too sad to read. Specially for people who have used TC for life like me.

      • May 24, 2020
Go to page