Statistics

165,401 members
129 posts
  • PatrikBouldin
    Contributor - Level 2
    2020-05-24

    HI, I know I can set FX1-4 levels on the X-touch, but I can't seem to find how to adjust the FX output (this would be the bottom far-right fader on the Xedit app, where you select either MAIN LR, Bus1-5, or FX1-4). Where on the X-Touch do you set the FX OUTPUT (not the input)? Any help?  I uploaded a picture of where I would do this on the X-edit app.

    Thanks - Patrik

    x-edit.png
    read more...
    0 68
    • PatrikBouldin
      RexBeckett

      @PatrikBouldin 


      The fader in your screenshot is the FX1 Send Master. This can be adjusted on the X-Touch by selecting the fifth fader bank (FX1-4/DCA1-4) and using faders 1..4 for FX Send Masters 1..4.

      • May 24, 2020
    • PatrikBouldin
      PatrikBouldin

      Rex, thanks VERY much, that did it. Hey question - is there actually a (real) users manual somewhere? I could only find a very short / shallow guide. Searched around.


      What am I missing on this stuff? There was no clue that faders 1-4 on the 5th fader bank controlled the FX master output!!! 


      Thanks again,


      Patric

      • May 24, 2020
    • PatrikBouldin
      RexBeckett


      @PatrikBouldin wrote:


      Rex, thanks VERY much, that did it. Hey question - is there actually a (real) users manual somewhere? I could only find a very short / shallow guide. Searched around.


      What am I missing on this stuff? There was no clue that faders 1-4 on the 5th fader bank controlled the FX master output!!! 


      Thanks again,


      Patric





      @PatrikBouldin 


      The functions are listed in the Firmware Version 1.15 Release Notes from X-Touch Downloads. 

      • May 24, 2020
  • cschmidt01
    Contributor - Level 1
    2020-04-16

    Hi all, 

    Anyone know the part number for the FCB1010 power cord? I don't believe the cord that came with my controller is the right one. It keeps falling out of the receptacle on the back of the FCB. 

    TIA.

    0 39
    • cschmidt01
      Paul_Vannatto

      Hi Carl @cschmidt01 ,


      The FCB1010 uses a standard IEC type cable that is identical to a computer power supply cable. I have been getting some of these ends to replace critical cable ends (for my X32 Racks, etc.) that I want to have guaranteed they won't pull out. They lock to the IEC jack very well.


       

      • April 16, 2020
    • cschmidt01
      JeffSterling

      yup standard IEC power cable... I have 2 milk crates full of them!!! I am a pakRat!

      • May 21, 2020
  • goaler111
    Contributor - Level 1
    2020-04-16

    Hello,

    Been trying for weeks now to get the X-Touch Mini controller to work with Reaper. Reaper sees it in the Midi devices list. It is set to Control only. In the Control/OSC/web section I have added a Mackie Control Universal and selected the X-Touch Mini as the input and output. I have created a new channel with the ReaControlMidi plugin on it. Beyond that I don't know what to do. On Mac OS 10.13.6.

    read more...
    0 35
  • IvanHart
    Contributor - Level 2
    2020-04-14

    I am considering the X-touch Mini to use as an MC controller for Cubase. I have not been able to confirm that it can be used to control track volume in this mode. Is this possible? If so how?

    If this is not possible please let me know so I can consider other options. I have an X-Touch which I love, but I use that for my XR18 and want something small for my studio desk. 

    Thanks for your time,

    Ivan

    read more...
    0 33
  • Cstotland
    Contributor - Level 3
    2020-04-07

    I was needing two specifications today in order to purchase some accessories for the Voicelive 3 I just ordered today.  This should have been simple.

    First, unit dimensions for a case.

    Quick Start guide, on page 16, reports.  9"x4"x7" ...which sounds wrong. Reference Guide, on page 179, reports 13.8"x8.5"x3"  which sounds correct....ARE EITHER CORRECT? 

    Next, connectors....those specified as XLR....WHICH GENDER? There are only graphics representing the back panel, no photos.  So which are male and which are female? A simple m or f in the specs would go a long way.

    The simple things are often the hardest. 

     

     

    read more...
    0 30
  • robriot
    Contributor - Level 2
    2020-04-04

    Hi

    I'm looking for instructions to allow me to figure out how crave works with Ableton. Is it possible or do I have to set the midi keyboard to work with Ableton to do that? 

    0 80
  • RolfTrijber
    Contributor - Level 1
    2020-03-15

    Hi There,

    Does anyone know how to convert channels from a U-Phoria UMC1820 in Windows 10 to mono?

    Thank you in advance for an answer,

    0 57
    • RolfTrijber
      RexBeckett

      Hello @RolfTrijber , welcome to the community.


       


      Windows treats most USB sound devices as stereo. Most DAWs can set tracks as mono or stereo either before or after recording. Which DAW software are you using?

      • March 15, 2020
  • Ken_HK
    Contributor - Level 1
    2020-03-14

    Hi Folks,

    I use X-Touch with Logic Pro as a Control Surface. The basic setting on X-Touch is "MC" and "USB".

    As I use Logic Pro to set various controls using "MODIFY + FUNCTION" keys on X-Touch, the related buttons always light up. I have tried many ways to try switch them off but failed. The only way is to set up again, both X-Touch and Logic CS.

    Could anyone help solve it.

    Thanks.

     

    read more...
    0 73
  • lwhite2
    Contributor - Level 2
    2020-03-09

    When using the Editor for the Behringer Mini controller I dump a configuration to Layer A and it's available when the unit is disconnected and reconnected to usb.

    However, when I dump a configuratio to Lay B, the setup disappears after the unit is disconnected.  I have to open the editor and dump to again when I reconnect.  

    Any idea what's going on ?

    read more...
    0 39
  • Stereomusic
    Contributor - Level 2
    2020-03-09

    Hi,

    i know that it's possible to controll the input Channels (Red cap) in Cubase with the xtouch, as i found  solutuíon in the www a few month ago. i forgot to bookmark the page or the video,, am an old man with short brain.

    Who can point me in the right direction for my problem?

    Any help would be appreciated

     

    best regards from Vienna, the heart of music

    Khun Otto

     

    read more...
    0 90
Go to page