165,426 members
175 posts
  • sigma

    test video uploadtest video uploadtest video uploadtest video uploadtest video upload

    0 22
  • QATestAccount
    Newcomer - Level 1

    QA Test

    0 26
  • sigma

    testt testttt testttt

    View Attachment
    0 57
  • Virn
    Community Manager

    no banner please

    0 60
  • senan
    Contributor - Level 1

    So I an using Ableton Live as my clock host, I connected my TD-3 by USB and have the MIDI OUT/THRU going into the MIDI IN of my vocla drum. I just want the TD-3 to play my midi pattern from Live while sending the clock through to the vocla drum. But however when I turn on sync in live's preference it works, but then the TD-3 play the internal patterns, then turning off sync, it plays my midi patterns from live but doesn't start my vocla drum. Any help is appreciated.

    0 21
    • senan

      Okay I seem to have found a fix. Turning Track on and Sync on in Live's preferences and then setting the clock source to MIDI DIN, solved the issue.

      Either I am really dumb at understanding or its some technical problem. Shouldn't the clock source be set to USB if thats what I am using as my clock source, since I am not using MIDI to sync the TD-3.

      • June 8, 2020
  • kesha1
    Contributor - Level 3

    I connected Roland PK 5A MIDI output to the Behringer MIDI In, the Motor is connected to a computer with Ableton.

    When I set the Motor MIDI Through settings to Thru or Merge, and the USB Out Mode to Thru or Merge the signal from the Roland goes through the Motor, and is received by the Ableton, but not all the keys all the time are playing, and sometimes a sound keeps playing after I release a key, so, I have to press it again, or engage the Panic button. When the Roland is connected to the Ableton directly, without the Motor it plays perfectly, without any glitches.

    What should I do in order to make the Roland (or any other instrument connected to the Motor's MIDI In) go through normally, without any glitches?

    0 33
  • DanFern
    Contributor - Level 1


    I've managed to get my Poly D Synced to my Daw's (reaper) midi clock. It was fairly easy even with very little documentation from Behringer. One issue I have though is that the Arpeggiator will only play 16th notes. Is that intended or is there some setting I should be able to tweak to set the arpeggiator rate (1/4, 8th, 16th, 8T, 1/4D, etc). Surely it isn't hard set to 16th notes?


    Thanks in advance



    0 28
  • Nijelusa
    Contributor - Level 1
    Hello! My name is Nijel and I am still learning much with regards to analog synthesizers, as the Behringer Model D is my first one. I noticed it was out of tune, and did the oscillator calibration following the manual. I was wondering what specifically does the oscillator calibration do (and the meaning of scale and ranges for the oscillators and what changing them does)? Also, what is a more detailed purpose of the pitch CV calibration and the octave range calibration, and why these may need to be done along with the oscillator calibration (for ex. does the pitch cv calibration only affect the 1 V/oct cv input? And would changing Osc 2 octave range on the front panel just throw away the oscillator calibration done for the other octaves?) Thank you!
    0 32
  • Thanasis
    Contributor - Level 1

    Hello, new neutron user here.
    When I crank up the resonance to 3 o'clock and above and do a filter sweep, I hear distortion coming from the overdrive cirquit ,even if the drive knob is fully closed. The only way to clean the signal ,is to put the overdrive level past 10 o 'clock but then the output signal becomes too weak to drive the preamp ,causing unwanted noise .
    Is there any calibration that I can do to overcome this issue?
    Even my MS20 filters are cleaner in full resonance sweeps.

    0 30
  • handyspoon
    Contributor - Level 1

    I want to sync my LFO to the sequencer/arp tempo received from midi and the tempo is happily synced with my DAW but it doesn't matter what I send to the assign output the LFO just won't sync. Also sometimes depending on clock input the tempo/gate length doesn't do anything. Any help? Thanks!

    0 53
Go to page