165,441 members
196 posts
  • BobaFett
    Contributor - Level 1

    Hi Hr. Behringer (Analog Papa):

    I want to say a big "Vielen Dank" from all of us who use analog synthesizers and can't afford to repair our old ones or buy used ones. You are single-handedly creating a 'new new wave" of creativity.

    As most of us use these in our DAW's, we are grateful for this:

    but can you ask your firmware engineer to please add MIDI CC for the knobs on the Model D, VC340, Odyssey, TD3, etc so that we can use it in our DAW (Logic PX 10.5 or Abelton) or if we want to play them LIVE we don't have to have octopus hands?

    Until then, that means we have to perform a Sysex Dump each session or have to manually turn them while recording audio instead?! It really limits the creativity and ease of use of your beautiful machines.

    Please consider it (hands held together in prayer). Please. All of us here will hug you!

    Thank you Analog Papa!

    Big hugs from Wien


    0 38
  • flpccc
    Contributor - Level 1

    Hi guys,

    I connected this sweet foot pedal to my PC through the M-Audio Uno USB/midi interface, installed the latest driver downloaded from the M-Audio site and it is working with each bank/pedal corresponding to adequate Guitar Rig preset. Example1: Bank0 / Pedal1 will be 001 preset in Guitar Rig and so on.


    My problem is that I am not able to program each bank/pedal to do what I assign it to through Options>Controller. I am only able to program Expression Pedals 1 and 2 however I want. When I try to do exactly the same thing with pedals my input just gets ignored and the preset changes to whatever default value are (see example1 above). I am quite sure I am performing the correct steps as I was able to program EP 1 and 2 with no issues.


    My questions is: How do I get Guitar Rig to recognize my pedals and allow me to program them through Options>Controller the way I'm able to program Expression Pedals?

    What piece of information am I missing? Please help me out! I spent many hours trying to work around this to no avail...

    Alternately, I downloaded the FCB1010 Manager which I am trying to figure out as we speak.



    0 38
  • PaulW_Frields
    Contributor - Level 3

    I've started a playlist of videos that can help you set up a MOTÖR 49 or 61 with Pro Tools on Mac OS X:

    I make it a point to explain the concepts, so that those with Windows machines can figure out the correct OS utilities or applications to use to get the same results.

    By the end of the series you can have not just faders, pan pots/encoders, and pads working as useful buttons, but also plugin support on inserts A-J, send A-J levels, and cool triggers like dropping markers on the timeline during recording or playback. I'm still cranking out videos but this is all working on my system here using ProTools 12, 2018, 2019, and 2020.

    0 38
    • PaulW_Frields


       I've watched all of your YouTube tutorials and have found them very helpful.

      After setting up my faders, rotaries, pads and transport controls on my Motor49 to take command of ProTools, I go to the Edit menu and successfully save the preset created for this purpose (Preset 1, which I also call ProTools). But every time I power down the Motor49 and then restart at a later time, all my MIDI re-programming is lost. 

      What's going on? Am I missing a save step somewhere?

      • May 19, 2020
  • RadarKilowatt
    Contributor - Level 1

    Where can I buy a replacement power cable/supply for a Behringer xTouchOne ????  Thanks.

    0 55
    • RadarKilowatt

      Hello @RadarKilowatt , welcome to the community.


      I suggest that you raise a Care ticket for Spare Parts explaining your requirements. This is done by clicking on Support at the top of the page and then clicking the Create a Care Ticket button. This is only possible if you have completed all the required fields in your profile. Make sure that you fill-in every required field on the Care form.

      • April 10, 2020
    • RadarKilowatt

      You can go into any guitar store and get a 9VDC power supply for guitar pedals (reverse polarity with minus on the pin) that can output at least 1700mA.

      • April 10, 2020
  • boer4u
    Contributor - Level 1
    Hello guys, Can anyone help me with an advice to figure out how I can control a Randall V2 Head with a Bheringer FCB1010 midi pedal?Is about how to setup the Midi channels/programs. Thank you in advance.
    0 45
  • alanmackey1
    Contributor - Level 2

    Hi, I recently got a Motor 61 during an end of year sale but now 2 of the keys do not work unless pressed down hard... playing normal every key will work except these 2.  I have opened a support ticket but have not had a reply at all and it has been over a week.  Is there anything I can do to start an RMA??

    0 120
  • lukario20
    Contributor - Level 1
    Pedal compatibility

     Hi! I want to know if the pedal is compatible with the Korg Pa700. Does this pedal also have an expression pedal? what is it that plugs into it?

    0 70
  • coolbreeze711
    Contributor - Level 1

    Im' trying to learn how to choose the correct voltage, and how to open the fuse compartment...

    0 168