Statistics

165,365 members
43 posts
  • RileyCasey
    Contributor - Level 2
    2019-11-26

    Well this is a busy forum isn't it?  Does anyone know of a way to copy and paste DSP parameters such as EQ and limiters between channels on the IPD control app?  I'm using the Mac and iPad versions and don't see this option.  Is it available perhaps in the Windows version?  

    Is there a better forum for this sort of question?  This one seems fairly low traffic.

    read more...
    0 174
    • RileyCasey
      AlexLane

      Hi @RileyCasey,


      My apologies for the late reply here.


       


      There is not a direct copy and paste feature but if you are trying to achieve matched channels, a stereo pair of speakers for example, then you can link channels and everything programmed on channel one will be copied onto channel 2 (with shared control for both channels).


       


      There are two link options found on the "Levels" tab, one for input stage and one for output stage. See attached picture.


       


       


       

      IPD Link.PNG
      • December 9, 2019
  • walford1
    Contributor - Level 1
    2019-11-21

    My amplifier has been sent to you for repairs and returned as no fault found but the audio keeps dropping out. I have a video showing the malfunction. Another tech offered to fix it but my amp is under warranty and i think it unfair .

    0 168
    • walford1
      AlexLane

      Hi @walford1 ,


       


      Sorry to hear about your amplifier issues, could you link me to the video please?


       


      It would also be helpfull to know a bit more information regarding the setup, is there anything else in the signal chain? Specifically which model amplifier is it?


       


       

      • December 9, 2019
  • elvisking
    Contributor - Level 1
    2019-11-19

    this issue is particularly evident at high volumes.  The volume drops to zero, stays that way for several seconds, then comes back on for a few seconds, and cuts out again, and repeats.

    0 61
  • ismailcandursun
    Contributor - Level 1
    2019-11-05
    0 157
    • ismailcandursun
      ismailcandursun

      I was investigating audio inputs and outputs of B112D (same in B115D)


      B112D has 2 XLR (combined with TRS) input connectors. From datasheet it was not very clear whether the combined pins are paralel and both (XLR and TRS) plugs can be used as balanced signal.


      At the and I have found the schematics on Internet and I solved the issue. The XLR and TRS combined connector pins are connected together in schematics. That means it is not important which one you use, it goes to the same circuit feed point. This signal is handled as differencial signal which corresponds to a balanced audio signal. 


      If you use a mono plug, or balanced plug (of course balanced cable has lower noise with long cable) your B112D/B115D will give you good sound. But never use XLR/TRS stereo signal to the one of the inputs. You have to use always mono signals for each balanced input. If you apply a stereo signal to a balanced input, right channel will be subtracted from left channel. I haven't tried it yet, but the result will not be your original sound.


       

      behringer_eurolive_b112d_sm.pdf
      • November 5, 2019
  • Psmikem
    Contributor - Level 1
    2019-10-23

    I need to know what the continuous wattage would be with all 4 channels driven into 8 ohms.  My speakers re rated at 300 watts continuous.  The specifications do not identify the continuous wattage per channel or the peak power, thanks

    read more...
    0 120
  • MagnusO
    Contributor - Level 1
    2019-10-22

    Hi All,

    Ive got a very nice guitar combo amp, the Behringer V-Ampire LX210.

    Obviously meant for processing guitar signals, but the manual gives an example with drum computer or CD player connected to it.

    I have not managed so far to get a clean, original, full frequency sound out of the speaker from a line-in source (Roland drum kit or mobile phone music).

    The output keeps sounding guitar-amp-like.

    My question now is: should I be able to get an original full range output on the speakers (if so, how?), or will the amp or Bugera speaker set inside not cover the whole 20 Hz-20 kHz normal music range?

    Thanks!

    read more...
    0 206
  • DittenLerooij
    Contributor - Level 2
    2019-10-14

    Does anyone know when the preset for the L' acoustic KS21 will be released?

    0 243
    • DittenLerooij
      AlexLane

      Hi @DittenLerooij ,


       


      If regarding IPD series amplifiers...


       


      Unfortunatly the IPD2400 is a little underpowered for the KS21, you would likely find the amp starts to drop power with sustained use driving KS21.


       


      If regarding LAKE amplifiers...


       


      I would like to get the KS21 preset into the loadlibrary, however the process requires measuring the manufacturers speaker to create a preset from scratch or measuring another amplifier output to create a clone. This is due to the data not being readily available online or from the manufacturer.


      It is on my radar to get done when possible, unfortunatly I cannot give you an estimate of when this might be done for you. 


       

      • December 9, 2019
    • DittenLerooij
      DittenLerooij

      Hi Alex,


      I did a quick measurement and have a base ready for use on my 5K44, but still need to set limiter settings.


      I only have Smaart to measure, no equipment to measure amp outputs unfortunable...

      • December 9, 2019
  • paul_whitehurst
    Contributor - Level 2
    2019-10-02

    My amp powered off.  I replaced the fuse.  No sound.  I think it's in protect mode.  The display lights.  The light rings around the volume knobs are lit.  When I turn the power on the fan runs for one second and shuts down.

    Is this protect mode?  How do I get it out of protect mode?

    Thanks, Paul

    read more...
    0 156
  • paul_whitehurst
    Contributor - Level 2
    2019-09-20

    I filed a claim on Sept. 16.  I have heard nothing.  I can't find anyway to contact someone about what is going on.

    Thanks, Paul

    0 281
  • cepatton
    Contributor - Level 1
    2019-09-18

    Where can I find an authorized Behringer repair shop for mr K3000FX? My rehearsal studio is in San Jose, Ca. Any assistance you can give would be greatly appreciated.

    cepatton 

    0 83
Go to page